United Utensco Jacketed Tank- 85 Gallon. Stainless steel. Jacketed sidewall and bottom. Tank design pressure: atmospheric. Tank design temperature: 400°F. Jacket design press: 150 psi. Jacket design temperature: 366°F. Shell thickness: 0.063. PO No: SZ-50746. Loading scale. Mettler Toledo controls. Base material: 304 stainless steel. Inlet (jacket): 1-1/2 in. threaded female. Outlet (jacket): 1-1/2 in. threaded male; bottom: 2 in. threaded female. (3) Legs with casters. Overall dimensions: 41 in. L x 41 in W x 71 in. H.
Stainless Steel Dimple Jacketed Tank- 60 Gallon. Capable of holding high pressures. Tank discharge: 2 in. valve. Jacket inlet/outlet: 1 in. NPT (female). Overall dimensions: 29 in. diameter x 46 in. H.
Insulated Stainless Steel Tank-50 Gallons. Inside dimensions: 26 in. dia x 29 in. H. Inlets/outlets: (1) 1/2 in. (1) 3/4 in., (1) 1-1/2 in., (1) 1 1/2 in. Overall dimensions: 30-1/2 in. L x 30-1/2 in. W x 45 in. H.
Dimple Jacketed Tank-30 Gallon. Model: n/a. S/N: 684405. 316 stainless steel. MAWP 90 psi. Hydrostatic Test 180 CWP. Inlets/outlets: (1) 3/4 in. dia., (1) 1 in. dia. MPT outlet, (1) 1-1/2 in. dia. MPT. Leeson Motor, 1 hp, 1725 rpm, 208-230/460 V, 60 Hz, 3 phase. International Mixer. Type: GD2A. No: XF1239. Impeller diameter: 8-1/2 in. Overall dimensions: 29 in. L x 24 in. W x 72 in. H.
Stainless Steel Insulated Tank- 75 Gallon. Open top. Outlets: (1) 1-1/2 in. dia. Q-line fitting, (1) 1-1/2 in. dia. from tank. Overall dimensions: 36 in. L x 30 in. W x 40-1/2 in. H.
Stainless Steel Concentrated Heater Tank-40 Gallons. Inlets: (1) 1 in. dia. S-Line, (1) 1-1/2 in. dia. port, (1) 3 in. dia. port. Outlets: (1) 1 in. dia. S-Line, (1) 1 in. dia. NPT (female) Overall dimensions: 24 in. dia. x 48 in. L.
Will-Flo Dimple Jacketed Tank,35 Gallon, Serial 9642, 1966, Jacket mawp 70 PSI vacuum 400 PSI, natl board 477, 2 in jacket connection, 1 - 7/8 in outlet, 0.109 thickness shell and head, casters, inner dimensions 20 in W x 30 - 1/2 in H, 28 in W x 45 in H
SOLD
SOLD Cherry Burrell Insulated Univat Stainless Steel - 50 Gallon SOLD
Mfg:
Model:UAMS 50
Stock No. 20.153
Serial: 5503
Cherry Burrell stainless steel 50 gallon insulated univat model no. UAMS 50 serial no. 5503 with flip top lids falt bottom 2 - 2 inch inlets and 1.5 inch outlet, 43 inch height x 24 inch diameter.
SOLD
SOLD Processor Stainless Steel - 25 Gallon SOLD
Mfg:
Model:
Stock No. 15.201
Serial:
25 gallon stainless steel jacketed processor, open top, domed bottom, ID 16in, OD 20in. height 28.5in, bottom inlet and side outlet 1in, jacket bottom inlet and side outlet 1in.
SOLD
SOLD Will-Flo Tank - 35 Gallon SOLD
Mfg: Will-Flo
Model:
Stock No. 17.MFBB222.1a
Serial: 13565
Will-Flo Dimple Jacketed Tank, 35 Gallon, Serial 13565, 1969, Jacket mawp 55 PSI at 300F, natl board 1150, 2 in jacket connection, 1 - 7/8 in. outlet, 0.109 thickness shell and head, casters, inner dimensions 20 in. W x 30 - 1/2 in. H, 22 in. W x 45 in. H.
SOLD
Sold - Mueller Processor 80 Gallon - SOLD
Mfg: Paul Muller
Model:
Stock No. 52a.GR980
Serial: F-9167-11
Paul Mueller 80 Gallon Pressure Wall Processor, Model D, S/N F9167-11, vessel rating 0 psi at 250? F, water medium, jacket rating 60 psi at 300? F, 102 psi test, 0.146 cu.ft, center bridge with lift top covers, 2 tank side inlets 1 in., outlet 2 in., jacket connection 1 in., less agitator, inner dimensions 30 in. W x 30 in. H, overall dimensions 47 in. W x 62 in. H.
SOLD
50 Gallon Cherry Burrell Processor, painted exterior, slopped bottom, 1-1/2 in. Outlet with stainless steel valve, 1-1/2 in. and 1-1/4 in. top inlets on cover, jacket connections 3/8 in. less jacket rating, 1-1/2 in. top fitting, Inner dimensions: 24 in. W x 26 in. H slopped up to 29 in. H, overall dimensions 33 in. W x 39 in. H.
SOLD
SOLD Groen Mix Tank - 60 Gallon SOLD
Mfg: Groen
Model:
Stock No. FHF224x.2
Serial:
Groen Mix Tank-60 Gallon with agitator, 24 in. Diameter x 31 in. Depth, AC induction motor type N 224 1.5 hp 1,750 rpm (30:1) 220-440 volt, 3/4 in. jacket side inlet, 1 in. bottom jacket outlet, 1-¾ in. bottom outlet, cone bottom, 96 in. H x 40 in. W x 46 in. L. Gear box by: Groen Spee reducers S/N DD41102, Model HVS1, Ratio 30-1. Order No. 11015.
SOLD
SOLD Alloy Fab Inc. Aseptic Surge Tank / Processor - 20 Gallon
Mfg: Alloy Fab, Inc.
Model:
Stock No. 80.454a
Serial: 514
SOLD Alloy Fab Inc. aseptic surge tank processor, national board no. 5, serial No. 514, full vacuum shell 30 psi at 353 F jacket 30 psi at 353 F 80 lt - 20 gal with 2 top sight glasses, bolted cover, 8 - 1in threaded inlets (4 on ea. side), 1 - 1in threaded inlet (side), 1in bottom outlet, 2 - 1in top inlets, 1 - 1in flanged top inlet, with Adjusto Spede .75 hp motor model no. 7521-D293-GZ clutch 40 V .85 amps, motor: Type C continuous duty, rise 40 deg C, 3100 max rpm, 115 V, 9.6 amps or 200 min rpm 230V 4.8 amps, 60 cycle.
Sold 2) 50 Gallon Stainless Steel Tank. Model and SN n/a. Tank inside dimensions 23 in. L x 23 in. W x 28 in. H. Contains Flip-top lid, Center outlet, Lightnin Mixer, & Temperature Gauge. Inlets/Outlets: (2) 3/4 in. (1) 1 in. (2) 1 in. side and top, (1) 1-1/2 in. Lightnin Mixer. Mfg. Mixing Equipment Co., Inc. Model NAG-33. S/N 86/277814. Overall Dimensions: 32 in. L x 32 in. W x 65 in. H.
SOLD Precision Stainless Inc. Processor Tank Stainless Steel - 25 Gallon SOLD
Mfg: Precision Stainless Inc.
Model:
Stock No. 15.168
Serial: 7653-1
Precision Stainless Inc. Processor Tank- 25 Gallon. S/N 7653-1. Nat'l Bd. No: 1694. 316 stainless steel. Vessel specifications: MAWP @ 400°F: atmosphere psig. Shell and head thickness: 0.187. Head dish radius: 18 in. HTS specifications: MAWP @ 400°F: 150 psig. Shell and head mat'l constr: 16 GA. Inlets: (2) 1 in. dia. jacket. Outlets: (1) 1/2 in. dia. jacket FPT, (1) 2 in. dia. tank Q-line fitting. Overall dimensions: 34 in. L x 34 in. W x 50 in. H. Can be used as pasteurizer for vat or batch processing.
SOLD
SOLD Cherry Burrell Univat Processor-60 Gallon SOLD
Mfg:
Model:U50M
Stock No. 32a.CJR02.2
Serial: 455
Cherry Burrell Univat Processor-60 Gallon. Model U50M. S/N 455. (1) 1-1/2 in. inlet, (1) 1 in. inlet, and a 2 in. hole for motor (no motor). (1) 1-1/2 in. outlet. (4) Legs at 13 in. H. Inside dimensions 24 in. dia. x 29 in. H. Overall dimensions 29 in. dia. x 51 in. H. Can be used as pasteurizer for vat or batch processing. Includes motor and drive.
SOLD Cherry Burrell Univat Processor-60 Gallon SOLD
Mfg:
Model:U50M
Stock No. 32a.CJR01.2
Serial:
Cherry Burrell Univat Processor, 60 gallon, Model U50M, S/N 455. (1) 1-1/2 in. inlet, (1) 1 in. inlet, and a 2 in. hole for motor (no motor). (1) 1-1/2 in. outlet. (4) Legs at 13 in. H. Inside dimensions 24 in. diameter x 29 in. H. Overall dimensions 29 in. diameter x 51 in. H. Can be used as pasteurizer for vat or batch processing. Includes motor and drive.
Jacketed Processor-8 Gallon. Stainless steel. Processor is equipped with an Arrow Engineering pneumatic mixer. Mixer has a 5 in. dia. x 5 in. H propeller. Processor features a removable lid. Inlets: (1) 1/4 in. dia. FPT for thermowell, (1) 1/2 in. dia. MPT for jacket. Outlets: (1) 1/2 in. dia. FPT for jacket, (1) 1-1/2 in. dia. male ferrule. Overall dimensions 19 in. L x 18 in. W x 51 in. H. Can be used as pasteurizer for vat or batch processing.
SOLD 1993 Viatec Stainless Steel Processor- 65 Gallon SOLD
Mfg: Viatec
Model:
Stock No. SGMT319.2a
Serial: 6464
1993 Viatec Stainless Steel Processor- 65 Gallon. Tank S/N: 6464, Manufacturer S/N: 76545-1-5. Jacket MAWP: 65 psi. @ 300°F. Jacket: MDMT -20°F @ 65 psi. Hinged lid. Top port for mixer. Outlet: 2 in. threaded female to 1 in. threaded male. On casters for easy movement. Overall dimensions: 36 in. L x 35 in. W x 57 in. H.
