1997 Charles Ross and Son Batch High Shear Rotor-Stator Mixer
Mfg: Ross
Model:ME-501
Stock No. DSLP850.6
Serial: 72002B
1997 Charles Ross and Son Batch High Shear Rotor-Stator Mixer. Model: ME-501. S/N: 72002-B. Vacuum/pressure vessel applications. Impeller: 2-1/2 in. dia. Pneumatic Motor. Ross SS Hydraulic Hoist. Maximum height: 97 in. Inlets: (1) 3/4 in. dia. NPT, (1) 1 in. dia. S-line fitting. Outlets: (1) 3/4 in. FNPT, (1) 1 in. dia. S-line fitting. Overall dimensions: 56 in. L x 42-1/2 in. W x 67 in. H. (ACN217).
Lloveras Universal 500 Chocolate Maker. Model: Universal 500. Capacity: 1100 lbs (500 kg). Simultaneously grinds, blends, warms, and refines ingredients. Rotating blades provide pressure against the inner wall of the working chamber. This chamber is fitted with grooved sections used by the blades to mix and refine the product, as required. Blades and grooved sections are easily removed for changing and cleaning. Double-jacketed for heating and cooling. In-line hot water heater. Thermocouple. Motor: 20 hp, 50-60 Hz, 220/440 V, 3 phase. Suitable for a wide range of manufactured products such as chocolate, chocolate substitutes, pralines, special coatings, and fillings. It can also be used for recovery and recycling of rejects from other product lines.
Cozzini PrimeCut Gravity Fed Reduction System. Model: AR901. Capacity: up to 33,000 lb/hr. Hopper: 41 in. L x 41 in. W x 22 in. H. Inlet: 8 in.; outlet: 3 in. Impeller dia: 9 in. Lincoln Multiguard Encapsulated AC Motor: 100 hp, 1770 rpm, 208/460 V, 228/119 amps, 60 Hz, 3 phase, 1:1.4 pulley ratio. Final speed: 2478 rpm. Overall dimensions: 95 in. L x 44 in. W x 46 in. H.
Tri-Homo Corp. Laboratory Colloid Mill. Type: Champ LD. S/N: 54-07. Size 2-1/2 in. 1 in. inlet, 1 in. outlet. US Electrical Motor, 1 hp, 3,600 rpm, 220/440 volt, Cycles: 60, 2.6/1.3 amps, 2 phase, Frame: 66-2, Type: SC, S/N 2318678, unit on casters. Overall Dimensions 27 in. L x 12 in. W x 36 in. H.
Fitzpatrick Fitzmill. Flat blades with impact edges: 16 teeth; 6 in. L. Tube screen hole diameter: 0.482 in. Allen Bradley control box. Fitter: 6 in. L x 20 in. W. Inlet: 9 in. W x 13-1/2 in. H. Discharge: 10 in. L x 5-1/2 in. W. Overall dimensions: 55 in. L x 32 in. W x 60 in. H.
Fpeco Stainless Steel Hammermill. Motor and mill are frame-mounted with 304 stainless steel base. Mill has (11) 17-1/2 in. L x 4-1/2 in. W blades. Inlet- 18-1/2 in. L x 12-1/2 in. W x 11-1/2 in. H, Outlet- 19-1/2 in. L x 13-1/2 in. W x 12-1/2 in. H. Lincoln Electric Motor- 20 hp, 1,760/1,450 rpm, 230/460-208/415 V, 54/27-60/30 amps, 60/50 Hz, 3-phase. Overall dimensions: 59 in. L x 58-1/2 in. W x 75 in. H.
Fpeco Stainless Steel Hammermill. Motor and mill are frame-mounted on a 304 stainless steel base. Unit has (11) 17-1/2 in. L x 4-1/2 in. W blades, an 18-1/2 in. L x 12-1/2 in. W x 11-1/2 in. H inlet, and a 19-1/2 in. L x 13-1/2 in. W x 12-1/2 in. H outlet. Lincoln Electric Motor, 20 hp, 1760/1450 rpm, 230/460 V, 50/25 amps, 60 Hz, 3 phase. Overall dimensions: 60 in. L x 54 in. W x 75 in. H.
Prater Hammermill. Model: M30. S/N: 391081. Hammermill utilizes a 3/16-mesh screen over a mild steel cutting disc. Cutting disc diameter: 10 in. Premium Efficiency Motor, 20 hp, 3525 rpm, 230/460 V, 47.2/23.6 amps, 60 Hz, 3 phase. Inlets: 3-1/2 in. dia. infeed port. Outlet: (2) 4 in. dia. bottom discharge port. Overall dimensions: 52 in. L x 32 in. W x 67 in H.
Prater Hammermill. Model: M30. S/N: 391082. Hammermill utilizes a 3/16-mesh screen over a mild steel cutting disc. Cutting disc diameter: 10 in. Premium Efficiency Motor, 20 hp, 3,525 rpm, 230/460 V, 47.2/23.6 amps, 60 Hz, 3 phase. Inlets: 3-1/2 in. dia. infeed port. Outlet: (2) 4 in. dia. bottom discharge port. Overall dimensions: 52 in. L x 32 in. W x 67 in H.
Commercial Manufacturing Company Delumper. S/N: CB7969169. Job No: 9169. Machine uses dual 10 in. dia. hammers for product disintegration. Chamber is equipped with (1) 16-1/2 in. W x 14-1/2 in. H access door. Height at infeed: 82-1/2 in. Reliance Electric Motor, 2 hp, 1,725 rpm, 208-230 V, 460-480 amps, 60 Hz, 3 phase. Sumitomo SM-BEIER Variable Speed Drive, speed range: 82.3-20.6 rpm. Inlets: 14-1/2 in. x 19 in. Outlets: 26 in. L x 15-1/2 in. W bottom discharge. Overall dimensions: 10 ft. 40 in. L x 64 in. W x 98 in. H.
Waukesha Shear Pump. Model: SP. S/N: 306 SS. Nominal capacity: 30 gpm. Maximum housing pressure: 150 psi. Reliance Electric Motor, 15 hp, 3515 rpm, 460 V, 19 amps, 60 Hz, 3 phase. The Waukesha Shear Pump is designed for 'on-line', continuous shearing and mixing action. Key features include: 316 stainless steel body, rotor, stator, and shaft. Shear pumps can be used to texturize, emulsify, blend, reconstitute, suspend/disperse, and to polish. Inlets/outlets: (2) 2 in. dia. threaded fittings. Overall dimensions: 46-1/2 in. L x 19 in. W x 19-1/2 in. H.
Unused 1993 Dorr-Oliver Supration Shear Pump. Model S600.4.0.5, S/N: 5114. MAWP: 87 psi @ 392 °F. 316 stainless steel tooth and chamber tool set. Inlet: 8 in. Outlet: 6 in. Rotor speed: up to 1800 rpm. Volumetric flow rate: up to 330 gpm. Overall dimensions: 67 in. L x 34 in. W x 41 in. H. Unit is "unused".
1990 Waukesha Shear Pump. Model: SP4. S/N: 92251. Material of construction: 316 stainless steel. Nominal Capacity: 36 gpm. Capacity (9,900 cps): 20 gpm @ 10 psi. Capacity (32,400 cps): 14 gpm @ 10 psi. Seals: mechanical face-type. U.S. Electric Motor, 20 hp, 3525 rpm, 230/460 V, 49.8/24.9 amps, 60 Hz, 3 phase. Typical product applications: reconstitution of powdered products such as milk powders. Provides uniform dispersion of products such as dyes. Gives a smooth body and texture to such products as ricotta cheese and food pastes. Makes stable emulsions of products with both oil and water base ingredients. Provides continuous, on-line blending without air incorporation or lumps of dry product. Inlets/outlets: (2) 2 in. dia. ACME fittings. Overall dimensions: 4 ft. 3 in. L x 1 ft. 6 in. W x 3 ft. 11 in. H. (ACN94)
Fitzpatrick Fitzmill. Model: DKAO-12. S/N: 6660. Knife dimensions: 3 in. L x 1-1/4 in. W. Siemens Electric Motor, 10 hp, 1750 rpm, 230/460 V, 25/12.5 amps, 60 Hz, 3 phase. Inlets: (1) 1 ft. 1 in. L x 1 ft. 1 in. W. (hopper infeed). Outlets: (1) 15-3/4 in. L x 1ft. 1-1/4 in. W. (product discharge). Overall dimensions: 4 ft. 3 in. L x 2 ft. 10 in. W x 3 ft. 11 in. H. (ACN348-67).
Fitzmill Comminutor. Model DKASO.12. S/N: 8299. Stainless steel. Lesson motor, 30 hp, 3510 rpm, 208-230/460 V, 70-68/34 amps, 60 Hz. Safety switch. Feed throat, discharge open/close, removable throat grid, removable hopper grid, inline feed hopper. Removable container: 15 gallon. Inlet: 3-1/2 in. threaded male. Outlet: 4-1/2 in. threaded male. Overall dimensions: 4 ft. 7 in. L x 3 ft. 1 in. W x 5 ft. 2 in. H.(ACN456-76).
Comvair Emulsifier. Model: 76. S/N: 160-7-125. Infeed hopper dimensions: 72 in. L x 41 in. W x 53 in. H. Toshiba Motor, 125 hp, 1770 rpm, 1840 rpm (final), 230/460 V, 300/150 amps, 60 Hz, 3 phase. Inlets: (1) 5 in. dia. product inlet. Outlets: (1) 3 in. dia. threaded fitting. Overall dimensions: 72 in. L x 41 in. W x 53 in. H.
Fitzmill with Hopper. Model: DAS06. S/N: N/A. Chopping blades: (16) 3-1/2 in. L x 1 in. W; 316 stainless steel. Hopper: 16-1/2 in. L x 10 in. W. Inlet dimensions: 11 in. L x 6 in. W. Outlet: oval; 12-1/2 in. L x 9 in. W. Dual voltage motor; no nameplate information, currently on a 1:1 pulley ratio but speed can be reduced to 2.3:1 ratio. Motor base adjustable for easy access to drive belts. Overall dimensions: 43 in. L x 26 in. W x 23-1/2 in. H.
Fitzpatrick Comminuting Machine. Model F "2600 Series". For dry, heat sensitive, or liquid type products. Milling area: 8-1/2 in. x 15 in. Fixed blades: 7-1/2 in. x 3-1/2 in. x 3/8 in. In-feed Hopper: 28 in. x 28 in. x 16 in. H. Outlet: 3 in. tri-clamp. Drive: 15 hp. Screen size: 5/8 in. dia. Flanged base: 18 in. x 14 in. Overall dimensions: 63 in. L x 39 in. W x 52 in. H.
Young Machinery Co. Inc. Stainless Steel Rotary Shear Mill/Cutter. S/N 428, Size: 624. S.O. No: 1952. Cust. No: 5-121. Constructed for mixing ingredients of different weights, bulk densities and shapes, and may be used on either a continuous blending or batch type blending arrangement. Mild steel frame. Mounted on four casters for easy maneuverability. Infeed hopper dimensions: 24 in. L x 17 in. W. Lincoln AC Motor, 25 hp, 1750 rpm, 721 Final rpm, 3 phase, 230/460 V, 64/32 amps. Inlets: (1) 24 in. L x 8 in. W infeed throat. Outlets: (1) 3 in. dia. S-Line fitting. Overall dimensions: 58 in. L x 54 in. W x 58 in. H.
Stokes Oscillatory Granulator. Model: 43A. S/N: 50962. Lot: A45760. The oscillating granulator is extensively used wherever tablets or pellets are produced. Oscillatory Granulator is used for both wet and dry granulation processes. All parts in contact with the product to be granulated are of high quality stainless steel. (7) Stainless steel screens that range from 0.185 in. to 0.020 in. mesh. Control box with start and stop switches. Dayton Motor, 2 hp, 1150 rpm, 230/460 rpm, 7.0/3.5 amps, 60 Hz, 3 phase. Pulley ratio: 2 to 1. Final rpm: 575. Inlets: (1) 15-1/2 in. L x 15 in. W infeed. Overall dimensions: 39 in. L x 34 in. W x 56 in. H.
1994 Sympak, Inc. Stephan Microcut - Series Emulsifier. Model: Microcut MCH20. S/N: 721.626.02. Material of Construction: 304 Stainless Steel. Stephan Motor 20 hp, 3510 rpm, 220/440 V, 48/24 amps, 60 Hz, 3 phase. Inlet: (1) 4 in. L x 1 in. W port. Outlet: (1) 3 in. dia. port. The MCH20 meets a wide range of the processing requirements of various segments of the food industry and has applications that include baby food processing, vegetable and fruit grinding, biscuit rework grinding, and marinade or sauce processing. A long-life, contactless rotor stator system allows premium fine cutting and emulsifying effects in the same machine. With special tools, difficult products like sinews, soft bones and skin are easily processed. Overall dimensions: 3 ft. 7 in. L x 2 ft. 2 in. W x 3 ft. H. (ACN349).
Stephan Microcut Emulsifier. Model: MCH-D100-11/C. S/N: KZ14.932. Capacity: 17,600 lbs/hr (8000 kg/hr). The Stephan Microcut is a multifunctional fine cutting and dispersing system. Horizontal construction with double stage rotor-stator assembly. Benefits of the Microcut: efficient fine grinding, ideal cutting, homogenous mixing, optimal powder dispersing, stable emulsions, constant product quality, and ease of operation. Cutting disc diameter: 7-1/2 in. Stephan Motor, 165 hp(125 kW), 3565 rpm, 440 V, 195 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting. Outlets: (1) 3 in. dia. I-line fitting. Overall dimensions: 74 in. L x 33 in. W x 52 in. H.
Stephan Microcut Emulsifier. Model: MCHD100-11CS. S/N: 712.449.02. Capacity: 17,600 lbs/hr (8000 kg/hr). The Stephan Microcut is a multifunctional fine cutting and dispersing system. Horizontal construction with double stage rotor-stator assembly. Benefits of the Microcut: efficient fine grinding, ideal cutting, homogenous mixing, optimal powder dispersing, stable emulsions, constant product quality, and ease of operation. Cutting disc diameter: 7-1/2 in. Stephan Motor, 200 hp (150 kW), 2970 rpm, 440 V, 225 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting. Outlets: (1) 3 in. dia. I-line fitting. Overall dimensions: 74 in. L x 33 in. W x 52 in. H.
Stephan Microcut Emulsifier. Model: MCHD60-11/C. S/N: 711.671.01. Capacity: 8,500 lbs/hr (4000 kg/hr). The Stephan Microcut is a multifunctional fine cutting and dispersing system. Horizontal construction with double stage rotor-stator assembly. Benefits of the Microcut: efficient fine grinding, ideal cutting, homogenous mixing, optimal powder dispersing, stable emulsions, constant product quality, and ease of operation. Cutting disc diameter: 7 in. Stephan Motor, 100 hp (80 kW), 3560 rpm, 440 V, 137 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting. Outlets: (1) 3 in. dia. I-line fitting. Overall dimensions: 74 in. L x 33 in. W x 52 in. H.
Gifford Wood Attrition Mill. S/N: QV6-2-6903. Reduces particle size by rubbing. The rotating impeller over a stationary plate combination produces the tight gaps needed to reduce the particles down to size. Dry or wet material handling. Impeller diameter: 3 in. Electric motor. Inlets: (1) 1/2 in. dia. return pipe. Outlets: (2) 1/4 in. dia. barb fittings. Overall dimensions: 15 in. L x 12-1/2 in. W x 39-1/2 in. H.
Young Machinery Co. Inc. Stainless Steel Rotary Shear Mill/Cutter. S/N 428, Size: 624. S.O. No: 1952. Cust. No: 5-121. Constructed for mixing ingredients of different weights, bulk densities and shapes, and may be used on either a continuous blending or batch type blending arrangement. Mild steel frame. Mounted on four casters for easy maneuverability. Infeed hopper dimensions: 24 in. L x 17 in. W. Lincoln AC Motor, 25 hp, 1750 rpm, 721 Final rpm, 3 phase, 230/460 V, 64/32 amps. Inlets: (1) 24 in. L x 8 in. W infeed throat. Outlets: (1) 3 in. dia. S-Line fitting. Overall dimensions: 58 in. L x 54 in. W x 58 in. H.
2004 C.S. Bell Co. Carbon Steel Mill. Model: MILPA. S/N: SARATI AAOOB. Hopper infeed dimensions: 22 in. L x 15 in. W. Screw auger dimensions: 2-1/2 in. dia. x 5-1/2 in. L. Screw auger pitch: 2 in. Leeson Electric Motor, 5 hp, 1740 rpm , 435 rpm (final), 230 V, 60 Hz, single phase. Base frame with adjustable motor mounting bracket. Safety belt guard and V-drive package. Adjustable feed hopper. Mobile base frame. Inlets: 8 in. L x 7 in. W infeed. Outlets: (1) 9 in. dia. discharge. Overall dimensions: 33 in. L x 27-1/2 in. W. x 39-1/2 in. H. (ACN25).
Jayhawk Mustard Mill. Model: 3MPYC. Capacity: 75 gal. or 635 lbs. per hour. Louis Allis Induction Motor, 10 hp, 3520 rpm, 220/440 V, 27/13.5 amps, 60 Hz, 3 phase. The Jayhawk mustard mill is a wet process, stone grinding size reduction mill using precision balanced, diamond cut stones in varieties of applications to include mustard, hot sauce processing, or anything that requires reduction by wet grinding. Inlet: 1 in. flared threaded end. Outlets: (1) 4 in. L x 1 in. W discharge. Overall dimensions: 32 in. L x 18 in. W x 16 in. H. (ACN125)
Jayhawk Mustard Mill. Model: 2MPYC. Capacity: 75 gal. or 635 lbs. per hour. Century Motor, 7.5 hp, 3470/2890 rpm, 220-440 V, 60/50 cycle, 3 phase. The Jayhawk mustard mill is a wet process, stone grinding size reduction mill using precision balanced, diamond cut stones in varieties of applications to include mustard, hot sauce processing, or anything that requires reduction by wet grinding. Inlet: 1 in. flared threaded end. Outlets: (1) 4 in. L x 1 in. W discharge. Overall dimensions: 27 in. L. x 15 in. W. x 16 in. H. (ACN125)
Jayhawk Mustard Mill. Model: 3MPYC. Capacity: 75 gals. or 635 lbs. per hour. Louis Allis Induction Motor, 10 hp, 3520 rpm, 220/460 V, 60 Hz, 3 phase. The Jayhawk mustard mill is a wet process, stone grinding size reduction mill using precision balanced, diamond cut stones in varieties of applications to include mustard, hot sauce processing, or anything that requires reduction by wet grinding. Inlet: 1 in. flared threaded end. Outlets: (1) 4 in. L x 1 in. W discharge. Overall dim: 32 in. L. x 18 in. W. x 16 in. H. (ACN125).
Jayhawk Mustard Mill. Model: 3MPYC. Capacity: 75 gals. or 635 lbs. per hour. Louis Allis Induction Motor, 10 hp, 3520 rpm, 220/440 V, 27/13.5 amps, 60 Hz, 3 phase. The Jayhawk mustard mill is a wet process, stone grinding size reduction mill using precision balanced, diamond cut stones in varieties of applications to include mustard, hot sauce processing, or anything that requires reduction by wet grinding. Inlet: 1 in. flared threaded end. Outlets: (1) 4 in. L x 1 in. W discharge. Overall dimensions: 32 in. L x 18 in. W x 16 in. H. (ACN125).
Charlotte Colloid Mill. Model: G5. S/N: 2291. Stainless steel. US Electric Enclosed Motor, 3600 rpm, 208-220/440 V, 15.15-14.3/7.15 amps, 60 Hz, 3 phase. Inlets: (1) 1/2 in. dia. NPT, (1) 3/4 in. dia. FNPT. Outlets: (1) 1/2 in. dia. NPT (male), (1) 3/4 in. dia. FNPT. Overall dimensions:34 in. L x 23-1/2 in. W x 22-1/2 in. H.
Romaco FrymaKoruma Colloid Mill. Model: MZ250-D. S/N: M10561. Impeller diameter: 9 in. Inlets/outlets: (2) 1-1/2 in. dia. ACME fittings. Overall dimensions: 34 in. L x 20 in. W x 17 in. H. (ACN500-84).
Fitzpatrick Fitzmill Double Riving Machine. Model: 8. S/N: E-187. Roller dimensions: (2) 12-1/2 in. L x 7 in. W. Teeth dimensions: 1/2 in. L x 1/2 in. W. U.S. Syncrogear Motor, 3 hp, 1800 rpm, 220/440, 8.6/4.3 amps, 60 Hz, 3 phase. Syncrogear Drive, ratio: 20.9, rpm out: 84 (final). Inlet: (1) 13-1/2 in. dia. (chute infeed). Outlet: (1) 11 in. dia. (discharge port). Overall dimensions: 4 ft. 11 in. L x 2 ft. 8 in. W x 4 ft. 4 in. H.
Kearney and Tracker milling machine, rotary head, model no. D, serial no. 4-8517, .75 horsepower motor, 1725 rpm, make Doerr, 220/440v, model no. M364E677BT.
Fitzpatrick Fitzmill Comminuting Machine
Mfg: Fitzpatrick
Model:D
Stock No. JHLC193.23
Serial:
Fitzpatrick Fitzmill Comminuting Machine. Model: D. Blade dimensions: 4 in. L x 1 in. W. Crown Signature Electric Motor, 5 hp, 1730 rpm, 208-230/460 V, 12.6/6.3 amps, 60 Hz, 3 phase. Inlets: (1) 5-1/2 in. L x 3-1/2 in. W. (infeed hopper). Outlet: (1) 9-1/2 in. L x 5-1/2 in. W. (discharge port). Overall dimensions: 3 ft. 3 in. L x 2 ft. 3 in. W x 6 ft. 3 in. H.
SOLD Stokes Granulator Tornado Mill Stainless Steel SOLD
Mfg: Stokes
Model:44-0
Stock No. 75.BR-23873a
Serial: 4106081
Stokes stainless steel granulator tornado mill, model no. 44-0, mfg. lot no. 410530, serial no. 4106081, 11 inch diameter, horizontal fixed blades, 5 horsepower, 3 ph, 440 volt TEFC motor, on stand with casters.
SOLD Fryma Colliod Mill SOLD
Mfg: Fryma
Model:MZ-150-D
Stock No. 35.NUK169.15a
Serial:
Fryma Colloid Mill, Type MZ-150-D, Part Number M16919, 1995, 2 3/4 in inlet and outlet, 87 PSI maximum pressure, 40 in L x 21 in W x 23 in H.
SOLD Jacobson Hammer Mill Stainless Steel SOLD
Mfg: Jacobson
Model:I-1614-B
Stock No. 85.RW-981.7a
Serial: 30936
Jacobson stainless steel hammer mill, with 3 deck vibratory screener and 12 in W x 8 ft L cleated belt infeed, model no. I-1614-B, serial no. 30936.
SOLD Bematek Colloid Mill SOLD
Mfg: Bematek
Model:
Stock No. 65.MRD402.16
Serial:
Bematek Colloid Mill, Size 5-HSS, 15 HP.
SOLD
SOLD Jayhawk Mustard Mill SOLD
Mfg: Jayhawk
Model:3MPYC
Stock No. 325.FHF293cc.52
Serial:
Jayhawk Mustard Mill Model 3MPYC, motor serial number 2320341 10hp 3520rpm 220/440V, 10 in D x 32 in L.
SOLD
SOLD Jayhawk Mustard Mill SOLD
Mfg: Jayhawk
Model:4MPYB
Stock No. 325.FHF293ee.52
Serial:
Jayhawk Mustard Mill Model 4MPYB, 25hp 220-440V,40in Long x 24in Diameter.
SOLD
SOLD - Fitzpatrick Mill - SOLD
Mfg: Robinson
Model:
Stock No. 75.McN-1052.45
Serial:
SOLD Fitzpatrick Mill. SOLD
SOLD D12 Fitzmill SOLD
Mfg: Fitzmill
Model:DKAS012
Stock No. HDLF78.50
Serial: 8706
D12 Fitzmill, Code DKAS012, S/N 8706 with 11 in. x 13 in. throat and 15 hp, Motor.
SOLD
Iverson Shear Pump. Stainless steel. 2 in. x 2 in. with 10 hp motor.
SOLD
SOLD 2001 Admix Boston High Shear Pump SOLD
Mfg: Admix
Model:BSP-25-3
Stock No. END81593.7a
Serial: 12501
2001 Admix Boston High Shear Pump. Stainless Steel. Model BSP-25-3, S/N 12501, Inlet 1 1/2 in. Outlet 1 in. Baldor Motor 20 hp, 3,525 rpm, 230/460 volt, 46/23 amps, 60 hz, 3 phase, 256 TC. Dimensions 5 ft. L x 3 ft. W x 3 ft. H. Cost new $33,000-$45,000
SOLD
Kuldis Peanut Butter Queen, Model PBQ 101-B, Serial Number 1731, 9 in x 9 in top inlet, 11 in deep, plexi-glass outlet 2 in x 1.5 in, 110V, 25 in H x 9.5 in W x 20.5 in L.
SOLD
SOLD Fitzpatrick Fitzmill Knife Set SOLD
Mfg: Fitzmill
Model:
Stock No. HDLF79A.4
Serial:
SOLD Fitzpatrick Fitzmill Stainless Steel Knife Set, Rotor type DKASOIL, Date inspected 2/5/02, max rpm 6,000 fully greased, balanced. Blades are 1-1/2 in. L x 7/16 in. W x 7 in. H. Shaft 1-1/3 in. diameter, (2) 7 in. pulleys on each end, and (2) 4 in. pulleys under the 7 in. pulleys respectively, 32 blades in total set 1 in. apart. Overall dimensions 34 in. L x 10-1/2 in. W x 11 in. H.
SOLD
Silverson High Shear Mixer. Model 450LS, S/N 450LS BI759. Inlet 2 in, Outlet 2 in. Motor, Reliance Electric, S/N P21S3069, 10 hp, 3,495 rpm, 208-230/460 volt, 26.5-24/12 amps, 60 hz, 3 phase, 2/5 TC. 100 gpm, 100 psi max rated. Made in 1999. 4.50 in. diameter rotor. Single Mechanical Virton Seal.
SOLD
Sold D12 Fitzpatrick Company Comminutor S/N 8706, code number BRA5012, Baldor Motor, catalog number 07H203W269, frame 254T, hp 15, 230/460 rpm, amp 38/19, 60 Hz. Fitter 12 in. W, 15 in. L, 10 in. H. 32 tooth Grinder blades 13 in. L. Discharge opening 14 in. x 14 in. Overall Dimensions 37 in. W, 44 in. L, 38 in. H.
Sold Ross High Shear Mixer, Model 25. S/N: 36963. Rotor stator- 5 in. dia. with 1 in. L x 1/8 in. W slots, (4) 1-1/2 in. L x 1/2 in. W x 1 in. H. Rotors, 2 ½ in. s-line outlet. Hopper size: 25 in. dia. reduces to 3 in. dia x 33 in H. Westinghouse motor-25 hp, 3,550 rpm, 230/460 V, 60/30 amps, 60 Hz, 3-phase. Overall dimensions: 22 in. L x 22 in. W x 74 in. H. Well-suited for emulsions and many medium-viscosity mixing applications. The inline mixer emulsifier is designed to provide high shear agitation with pumping action. As viscosity builds, throughput decreases linearly. You can experiment with flow throttling to increase the amount of work per unit volume if increased shear is desired. For general purpose mixing, emulsification, suspension or dissolution.
Lump Breaker Mill. With screw discharge, 25 in. L x 5-1/4 in. dia. Chute 70 x 88 x 63 in., at the grill 14 x 44 in., at base with knives 7 x 22 in. Outlet 4.25 in. Casters, motor 15 hp, 220-440 V, 1,700 rpm.
SOLD
24 in. Hammermill Stainless Steel. 33 x 27 in. chute inlet. Teco motor 5 hp, 230-460 V, 1,150 rpm. Overall dimensions 71 in. L x 45 in. W x 67 in. H.
SOLD
Powder Jet Mill Mounted on Portable Stainless steel table.
SOLD
SOLD 2001 New Silverson High-Shear Incline Static Mixer SOLD
Mfg: Silverson
Model:275LS
Stock No. TOG001.8
Serial: 275LSM1939
2001 Silverson High-Shear Incline Static Mixer. Model: 275LS, S/N: 275LSM1939. Self-pumping throughputs from 19 to 189,500 liters/hr. Aeration-free. Product cannot bypass the precision rotor/stator workhead. Easy to install. Easy to operate. Easy to clean. Brook Crompton Invensys Motor, 1.5/1.75 kW, 2870/3440 rpm, 220-240/380-415 and 254-277/440-480 V, 5.9-5.6/3.4-3.2 amps, 50/60 Hz, 3 phase. Inlets/outlets: (2) 1-1/2 in. dia. with a 5 in. dia. flanges and (4) 1/2 in. attachment holes at a center-to-center distance 4 in. Overall dimensions: 22 in. L x 9-1/2 in. W x 12 in. H.
SOLD
SOLD Quadro Ytron Fluid Mixer and Disperser Model XCT3A SOLD
Mfg: Quadro Engineering Incorporated
Model:XCT3A
Stock No. ENDX746.6
Serial: XCT-0007R
Quadro Ytron Powder Disperser, Model: XC1-3A, S/N: XC1-0007R. Liquid capacity: 40-70 gpm, Powder capacity: 150 lbs/min. 3A sanitary CIP cleanability. (2) 4.25 in. dia impellers. VP motor: 7.5 hp, 3,520 rpm, 6.7 amps, 575 V, 60 Hz, 3 phase. Final speed: 5,400 rpm. Inlets/outlets: (2) 1 1/2 in., (1) 2 in., (1) 1 in. The Quadro Ytron XC has a dual stage reactor housing designed specifically to incorporate and disperse large quantities of powders into a liquid stream in a single pass, without aeration. The first stage in the reactor creates a strong vacuum ensuring the powders are drawn into the reactor head. Immediately after the powder comes into contact with the liquid, the premix is subjected to directional and velocity changes as the mix repeatedly impinges on stationary baffles. The second stage tangentially discharges a smooth, lump-free, homogeneous product. Unit serves many applications in the food & beverage, pharmaceutical, and industrial field. See pdf for detailed information on this unit. Overall dimensions: 29 in. L x 21 in. W x 32 in. H.
SOLD
SOLD 2004 Admix Rotosolver High Shear Disperser/Dissolver SOLD
Mfg: Admix
Model:180RS159
Stock No. SGMI435.25a
Serial: 19000
2004 Admix Rotosolver High Shear Disperser/Dissolver. Model: 180RS159. S/N: 19000. Promotes intense vortex control, superior wetting out of powders and an easy-to-clean head design that meets 3-A requirements. The Rotosolver is a top-entry mount high shear mixer with the following characteristics: high-intensity optimum shear, one piece clean-in-place mix head, single shaft, obstruction free design, 100% dissolving, hydrating, or suspension. Mixing head diameter: 6-1/4 in. Shaft length: 67 in. Shaft diameter: 2-1/2 in. Baldor Industrial Motor, 10 hp, 3,450 rpm, 208-230/460 V, 24-24/12 amps, 60 Hz, 3 phase. Overall dimensions: 14 in. dia. x 9 ft. 3 in. H.
SOLD
SOLD Admix Rotostat High-Speed High-Shear Mixer SOLD
Mfg: Admix
Model:112XP94
Stock No. DPFI257.
Serial:
Admix Rotostat High-Speed High-Shear Mixer. Model: 112XP94. Style XP for high solids & viscosity. Maximum batch capacity: 400 gal. Mixing head diameter: 7.7 in. Maximum shaft length: 38 in. Baldor Stainless Steel Motor, 7-1/2 hp, 1760 rpm, 230/460 V, 20/10 amp, 60 Hz, 3 phase. Mounting flange has a 10 in. dia flange mount with (4) 1/2 in. dia. attachment holes at a center-to-center distance of 6 in. The unique patented revolving stator, when combined with the close clearance rotor, and high efficiency lower propeller, optimizes shear rates, pumping rates and particle size reduction. The interchangeability of different rotors, stators, and props provides maximum flexibility for fine tuning mixing applications and will never overshear sensitive materials or formulas. Overall dimensions: 13-1/2 in. L x 13 in. W x 67 in. H.
SOLD
Silverson Inline Mixing Pump. Model 275/400MS. S/N 40B1007. 230/460 V, 3 phase, 50/60Hz. Single mechanical seal. Baldor ID15H201-E adjustable speed drive controller. Motor: 10 hp, 3430 rpm, 209-230/460 V, 24/12 amps, 60 Hz, 3 phase. Inlets/outlets: 2 in. tri-clamp. (2) Rings of blades: 1st ring: 4 blades, 2nd ring: 12 blades. Inlet: from 2 in. 'S' line to 1-1/2 in., Outlet: 2 in. 'S' line. Overall dimensions (mixer): 28 in. L x 13 in. W x 16 in. H. Overall dimensions (speed drive): 8 in. L x 7 in. W x 14 in. H.
SOLD
Charlotte Colloid Mill, Model SD5, S/N 2767, stainless steel head, 1 in. bevel seat connections, Drive 7-1/2 hp 230/460 volts 3,500 rpm, painted on mild steel base, overall dimensions 50 in. L x 18 in. W x 18 in. H.
SOLD
SOLD Admix Rotostat High-Speed High-Shear Mixer SOLD
Mfg: Admix
Model:132XP124
Stock No. HDPH653.4a
Serial:
Admix Rotostat High-Speed High-Shear Mixer. Model: 132XP124. Maximum batch size: 600 gal. Standard motor horsepower: 7.5. Flow rate: 2300 gpm. Propeller diameter: 7 in. Shaft dimensions: 2 in. x 54 in. L. Mounting flange has a 6-1/2 in. dia flange mount with (4) 1/2 in. dia. attachment holes at a center-to-center distance of 3-3/4 in. The unique patented revolving stator, when combined with the close clearance rotor, and high efficiency lower propeller, optimizes shear rates, pumping rates and particle size reduction. The interchangeability of different rotors, stators, and props provides maximum flexibility for fine tuning mixing applications and will never overshear sensitive materials or formulas. Overall dimensions: 11 in. dia. x 54 in. H. SOLD
Admix Rotosolver High-Speed High Shear Mixer. Model: 132RS133. S/N: 03048. P.O: 2065. The Rotosolver is a sanitary mixing device which promotes intense vortex control, superior wetting out of powders and an easy-to-clean head design and meets 3-A requirements. Maximum batch size @ 100 cps: 750 gal. Maximum batch size @ 1,000 cps: 200 gal. Mixing head diameter: 5-1/4 in. Tip speed: 40 ft/sec. Pumping: 2,865 gpm. Maximum shaft length: 48 in. Baldor Industrial Motor, 10 hp, 1725 rpm, 208-230/460 V, 28-26/13 amps, 60 Hz, 3 phase. Overall dimensions: 13-1/2 in. L x 12 in. W x 88 in. H.
SOLD
Fitzpatrick Comminuting Machine. Model F. Series 2600. 16 blades: 4 in. L on bottom; 2 in. L on top x 3/8 in. W x 4-3/8 in. H. Feeder dimensions: top 15 in. L x 15 in. W; bottom: 15 in. L x 8 in. W x 36 in. H. Overall dimensions: 60 in. L x 38 in. W x 83 in. H. Customer's choice of motor size.
Charlotte Colloid Mill, Model SD5, S/N 2527, stainless steel head, 1 in. bevel seat connections, Drive 7-1/2 hp 230/460 volts 3,500 rpm, painted on mild steel base, overall dimensions 50 in. L x 18 in. W x 18 in. H
SOLD
