|
|
|
|
|
|
Used 2002 Interpack USA Series Carton Sealer. Model: USA2024-SB/3. Serial Number: D02M544001, Conveyor belt dimensions: 1 feet width x 3 feet 4 inches L. Minimum carton size: 6 inches length x 4 inches width. x, 4.5 inches height. Maximum carton size: Infinite L. x 20 inches width. x 24 inches height. Maximum case weight: 85 pounds Tape Size: 3 inches Belt speed: 82 ft/min. Two [2] Bodine Electric motors, 1/3 horse power, 115 V, 9.6 amps, 60 Hz, single phase. The USA 2024-SB is an ideal choice for processing narrow, lightweight, or void filled cases. Its selectable, floating upper assembly is perfect for processing compressible overfills and special features insure that downward force on the case is reduced during processing. Overall dimensions: 6 feet 2 inches length x 3 feet 7 inches width x 5 feet 5 inches height. [ACN50].
|
|
Stock No: fpe_SFEC195.9a |
Mfg: Interpack |
Model: USA 2024-SB/3 |
S/N: fpe_D02 M544 001
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 2002 Interpack USA Series Carton Sealer. Model: USA2024-SB/3. Serial Number: D02M544002. Conveyor belt dimensions: 1 feet width x 3 feet 4 inches L. Minimum carton size: 6 inches length x 4 inches width. x, 4.5 inches height. Maximum carton size: Infinite L. x 20 inches width. x 24 inches height. Maximum case weight: 85 pounds Tape Size: 3 inches Side belt drive. Belt speed: 82 ft/min. [2] 1/6 horse power gear motors, 115 VAC, 60 Hz, 7.2 amp. The USA 2024-SB is an ideal choice for processing narrow, lightweight, or void filled cases. Its selectable, floating upper assembly is perfect for processing compressible overfills and special features insure that downward force on the case is reduced during processing. Overall dimensions: 4 feet 3 inches length x 3 feet 4 inches width x 6 feet 2 inches height. [ACN50].
|
|
Stock No: fpe_SFEC196.14a |
Mfg: Interpack |
Model: USA 2024-SB/3 |
S/N: fpe_D02 M5 44 002
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Dynaric Inc. Strapper. Model: DF11-SA. Serial Number: 9133. This strapper is a proven “workhorse” capable of over 37 strapping cycles per minute. It has a rugged frame and roller table top construction. Arch size: 1 feet 3 inches width x 1 feet 4 inches height. Tension: Adjustable with external control: 10 to 250 pounds Cycle initiation is by start switch. Infeed/Outfeed height: 2 feet 7-3/8 inches Power requirements: 230 V, 60 Hz, 3 phase. This machine uses 3/8 inches strap. The dispenser is internally located which minimizes the required floor space. The strapping material is heat sealed for maximum seal efficiency. Overall dimensions: 3 feet 8-3/4 inches length x 1 feet 1-1/2 inches width x 5 feet ¾ inches height.[acn297].
|
|
Stock No: fpe_KWBF342.1 |
Mfg: Dynaric Inc |
Model: DF11-SA |
S/N: fpe_9133
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_MRSP304.2a |
Mfg: Lepel |
Model: 250 |
S/N: fpe_8610
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M-Matic 12AF Adjustable Case Sealer System. Model: 12AF. Type: 59300. Serial Number: 6275. Maximum box dimensions: 2 feet length x 1 feet 8 inches width x 1 feet 7 inches height. Minimum box dimensions: 6 inches length x 4 inches width x 6 inches height. Power supply: 115 V, 2.8 amps, 60 Hz. [2] Bodine electric drives, 1/9 horse power, 1700 rpm, 60 Hz, 1.4 amps, single phase. Conveyor dimensions: 5 feet length x 7 inches width. Conveyor infeed/exit height: 2 feet 1 inches Overall dimensions: 5 feet 2 inches length x 2 feet 5 inches width x 2 feet 9 inches height. [ACN123a]
|
|
Stock No: fpe_SGM4095.10 |
Mfg: 3M-Matic |
Model: 12AF |
S/N: fpe_6275
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M-Matic Adjustable Case Sealer. Model: 12A. Serial Number: 5856. Type: 18600. Minimum box size handled: 5.87 inches [149mm] length x 4.5 inches [114mm] width x 4.75 inches [120mm] height. Maximum box size handled: limited to tape length x 19.69 inches [499mm] width x 19.69 inches [499mm] height. The semi-automatic 12A seals up to 23 cases per minute. [2] Coel motors: 1/8 horse power [0.12hp], 1620 rpm, 110/115 V, 1.8 amps, 60 Hz. Top tape applicator, side mounted power thru feed conveyor, twin gear motor with side belt drives for heavy duty performance, infeed/exit conveyor with rigid support mounting system, roller shafts with locking position, start/stop switch, and ball bearing rollers. Electrical requirements: 115 V, 3.1 amps, 60 Hz, 360 watts. Conveyor inlet/outlet heights: 22 inches min. H., 38 inches max. height. Overall dimensions: 38 inches length x 30 inches width x 65 inches H.[ACN450].
|
|
Stock No: fpe_DTWA083.6 |
Mfg: 3M-Matic |
Model: 12A |
S/N: fpe_5856
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M Case Sealer. Model no. 800a. Capacity: 40 cases per minute. Maximum width and height: 1 foot 7-1/2 inches. [2] Bodine Electric Co. motor: Type no. 42X5BFCI-E2. 1/6 Hp, 115 rpm, 115 V, 1.9 A, 60 Hz, 1 phase, 68 lb-in torque, 15:1 ratio. Case sealer handles 6 in. and up in length. Min/max width of box: 4-1/2 inches to 1 foot 7-1/2 inches. Min/max height of boxes: 4-3/4 inches to 2 feet 1 inch. Features include: spring-loaded side drives to center cases, dual masts with dual lead mast screws for extra stability and uniform height adjustments, twin gear drive motors for heavy-duty reliability, and 3 taping Heads for low-impact, top and bottom tape applications. Overall dimensions: 4 feet 6 inches L x 3 feet 3 inches W x 5 feet 8 inches H.
|
|
Stock No: fpe_SFEC3907.1 |
Mfg: 3M |
Model: 800a |
S/N: fpe_5702
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Loveshaw Corporation Little David Case Sealer. Model: LD7D. Serial Number: 198139127. Case capacity [with 2 inches wide CaseLocker ST Cartridge]: 3 inches width x 22 inches height [min]; 23 inches width x 22 inches height [max]. Tapes boxes from 4-1/2 inches to 29 inches high. Operating speed: up to 80 fpm. Weight: 196.5 pounds [uncrated]. Power supply: 110 V, 5 amps, 60 Hz, single phase. Baldor Motor, 1/4 horse power, 1725 rpm, 115-208/230 V, 5/2.6-2.5 amps, 60 Hz, single phase. Boston Gear 700-Series Speed Reducer. This reliable case sealer for industrial environments seals a wide range of cases. Semi-automatic operation. Conveyor infeed/exit: 30 inches Overall dimensions: 51 inches length x 25 inches width x 66 inches height.[h17].
|
|
Stock No: fpe_JJJA004. |
Mfg: Loveshaw Corporation |
Model: LD7D |
S/N: fpe_198139127
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M 3M-Matic™ Adjustable Case Sealer. Model no. 700a. Capacity: 40 cases per minute. Handles cases 6 inches and up in length. Min/max case width: 6 inches to 1 foot 8-1/2 inches. Min/max case height: 4-3/4 inches to 2 feet ½ inches. [1] Bodine Electric Co. motor: Type no. 42X5BFCI-E2. 1/6 Hp, 115 rpm, 115 V, 1.9 A, 60 Hz, 1 Ph, 68 lb-in torque, 15:1 ratio. Features include: dual masts for stability and uniform height adjustments, 3M™ AccuGlide™ taping heads for low-impact application of tape 36 mm to 48 mm wide, and adjustable slide guides for quick changeover for different size case runs. Overall dimensions: 4 feet 10-1/2 inches L x 2 feet 7 inches W x 6 feet 6 inches H.[ACN68].
|
|
Stock No: fpe_SFEC3801.3 |
Mfg: 3M |
Model: 700A |
S/N: fpe_12431
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Loveshaw 7C Case Sealer. Model: 7C. The 7C is manually adjustable to a wide range of box sizes. Carton capacity [min/max]: 8 inches / 2 feet 4 inches length x 6 inches / 1 feet width x 10 inches / 1 feet 4 inches height. Conveyor dimensions: 2 feet 6 inches length x 2-1/2 inches width belts [2]. Conveyor infeed/exit height: 2 feet 3 inches Taping heads are designed to apply a pressure-sensitive box sealing tape to the top and bottom center seam of regular slotted containers. Baldor industrial motor, 3/4 horse power, 1725 rpm, 115/230 V. Overall dimensions: 4 feet 2-1/2 inches length x 2 feet 7-1/2 inches width x 4 feet 11 inches height.
|
|
Stock No: fpe_BABR457.a |
Mfg: Loveshaw Corporation |
Model: 7C |
S/N: fpe_119238627
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_CPNV002 |
Mfg: 3M |
Model: 800rks |
S/N: fpe_1128
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_CPNV001 |
Mfg: 3M |
Model: 800rks |
S/N: fpe_1123
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Loveshaw Corporation Little David® Automatic Uniform Case Sealer. Model: LD16A. The LD16A is an automatic case sealer that is manually adjustable to a wide range of box sizes. Carton capacity[Min /Max]: 8 inches/2 feet length x 5 inches/1 feet 8 inches width x 4-1/2 inches/1 feet 8 inches height. Automatic top and bottom case sealer. Conveyor dimensions: 6 feet length x 1 feet width [double belt]. Conveyor infeed/exit height: 2 feet6 inches Taping head is designed for use with pressure sensitive tape. Power requirements: 240 V, single phase. Line air pressure required: 65 psi minimum. [1] Baldor electric motor, 1/3 horse power, 1725 rpm, 115/208-230 V, 6.4/3.2 amps, 60 Hz, single phase. Approximate weight: 650 pounds Overall Dimensions: 6 feet 7-1/2 inches length x 3 feet width x 6 feet 3 inches height.[acn184].
|
|
Stock No: fpe_SSBF218 |
Mfg: Loveshaw Corporation |
Model: LD16A |
S/N: fpe_104209316A
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M-Matic 12AF Adjustable Case Sealer System. Model: 12AF. Type: 48800. Serial Number: 005996. Maximum box dimensions: 2 feet length x 1 feet 8 inches width x 1 feet 7 inches height. Minimum box dimensions: 6 inches length x 4 inches width x 6 inches height. Power supply: 115 V, 3.1 amps, 60 Hz. [2] Bodine electric drives, 1/9 horse power, 1700 rpm, 60 Hz, 1.4 amps, single phase. Conveyor dimensions: 5 feet length x 7 inches width. Conveyor infeed/exit height: 2 feet1 inches Overall Dimensions: 5 feet length x 2 feet 11 inches width x 5 feet 3 inches height. [ACN123a]
|
|
Stock No: fpe_SGM4099I.1 |
Mfg: 3M-Matic |
Model: 12AF |
S/N: fpe_005996
|
|
|
|
|
|
|
|
|
|
|
|
|
Used ITT – Loveshaw / Little David High Speed Case Sealer. Model: LD-Series. Intertape Polymer Group High Speed Tape Head. Model HSD 2000NC, Serial Number 4NC-00390. Conveyor belt dimensions: 9 inches width x 2 feet 7 inches L. Infeed/exit height: 2 feet 4 inches Baldor Industrial Motor, ¾ horse power, 1725 rpm, 115/208-230 V, 8.2/4.5-4.1 amps, 60 Hz, single phase. Overall dimensions: 4 feet 4 inches length x 2 feet 8 inches width x 5 feet 1 inches height. [ACN50]
|
|
Stock No: fpe_HDFD393. |
Mfg: ITW – Loveshaw / Little David |
Model: LD-Series |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used ITT – Loveshaw / Little David High Speed Case Sealer. Model: LD-Series. Intertape Polymer Group High Speed Tape Head. Model: HSD 2000NC, Serial Number: 4NC-00839. Conveyor belt dimensions: 8 ½ inches width x 39 ½ inches L. Infeed/exit height: 2 feet 2 inches Baldor Industrial Motor, 1/3 horse power, 1725 rpm, 115/208-230 V, 6/3.2-3 amps, 60 Hz, single phase. Overall dimensions: 4 feet 4 inches length x 2 feet 3 inches width x 5 feet 2 inches height. [ACN45a]
|
|
Stock No: fpe_HDFD393B. |
Mfg: ITW – Loveshaw / Little David |
Model: LD-Series |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 3M Case Taper Parts on [3] pallets
|
|
Stock No: fpe_RGMP342.25 |
Mfg: 3M |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
