Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: S1FB3P2PPUS000. S/N: 848145. Date: 12-18-2003. Inlet\outlet: [2] 1-1/4 inch FNPT. [1] ¾ inch FNPT air inlet. Overall dimensions: 1 foot 5 inches L x 1 foot 1 inch W x 1 foot 10-1/2 inches H.

Used Warren Rupp Sandpiper II ™ Double Diaphragm Pump

Used 2000 Warren Rupp Sandpiper II ™ Double Diaphragm Pump. Model: S1FB1P2PQAS100. Serial Number: 689872. Maximum recommended air pressure: 100 psi – 7 bar. [1] 1 inches diameter flange inlet. [4] 5/8 inches mounting holes. 2-1/4 inches adjacent. 4-1/8 inches opposite. [1] 1 inches diameter flange outlet. [4] 5/8 inches mounting holes. 2-1/4 inches adjacent. 4-1/8 inches opposite. [1] 7/8 inches airline inlet. Overall dimensions: 1 feet 6 inches L. x 1 feet width. x 2 feet ¼ inches height.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model no. PB ½ -A. Type: TGN-3-PP. Maximum recommended air pressure: 100 psi. Features a solid ball check valve powered by compressed air and of a 1:1 ratio design. [1] ¾ inches MNPT inlet. [1] ¾ inches MNPT outlet. [1] ½ inches FNPT airline inlet. Overall dimensions: 10-1/8 inches L. x 7-1/8 inches width. x 11-1/2 inches height.

Used Warren Rupp Sandpiper® Air Powered Double Diaphragm Pump

Used Warren Rupp Sandpiper® Air Powered Double Diaphragm Pump. Model: PB3/4-A. Type: TR-3-PP. Approximate flow rate for new pump is 20 gallons per minute with required air flow and pressure at 30 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Polypropylene construction with Hytrel diaphragms. Temperature limits: 40ºF min. and 150ºF Overall dimensions: 1 feet 9 inches length x 9-1/2 inches width x 1 feet 7 inches H.[ACN6].

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: SB1-A. S/N: 534432. Type: SGN-4-SS. Maximum recommended air pressure: 100 PSI. Inlet/outlet: [2] 1-1/4 inch NPT. [1] ½ inch air inlet. Overall dimensions: 1 foot 2 inches Long x 11-5/8 inches Wide x 1 foot 3-3/4 inches High.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model No. PB1-A. Type: TGN-3-PP. Maximum recommended air pressure: 100 psi. [1] 1 inches flange inlet diameter [4] 5/8 inches diameter mounting holes. 2-1/4 inches adjacent. 3 inches opposite. [1] 1 inches flange outlet diameter [4] 5/8 inches diameter mounting holes. 2-1/4 inches adjacent. 3 inches opposite. [1] ¾ inches FNPT airline inlet. [1] ¾ inches air valve/center block. Overall dimensions: 1 feet 4 inches L. x 11-3/4 inches width. x 1 feet 10-1/2 inches height.

Used Warren Rupp Diaphragm Pump

Used Warren Rupp Diaphragm Pump. No Model. Serial Number 0005. Pump performance at 100 psi air supply: 28 gallons per minute at 5 psi of head, 25 gallons per minute at 20 psi, 15 gallons per minute at 50 psi, 10 gallons per minute 80 psi. Inlet [1] 1-1/2 inches Outlet [1] 1-1/2 inches Overall dimensions: 11 inches W, 17 inches L, 16 inches height.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump Skid with Tank. Model: PB1-A. Type: TGN-3-PP. Maximum recommended air pressure: 100 psi. [1] 1 inch diameter flange inlet. [4] 5/8 inch diameter mounting holes. 2-1/4 inch adjacent. 3 inch opposite. [1] 1 inch diameter flange outlet. [4] 5/8 inch diameter mounting holes. 2-1/4 inch adjacent. 3 inch opposite. [1] ¾ inch FNPT airline inlet. [1] ¾ inch air valve/center block. Tank volume: 28.64 gallons. Tank internal dimensions: 1 foot 5 ½ inch diameter x 2 foot 3 ½ inch H. Tank overall dimensions: 1 foot 6 inch diameter x 2 foot 4 inch H. Overall dimensions: 2 foot 8 inch L x 1 foot 8 ½ inch W x 3 foot 5 inch H. Not for sanitary applications. (BH).

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: PB1-A. S/N: 381342. Type: TGN-2-PP. Maximum recommended air pressure: 100 PSI. Inlet/outlet: [2] 1 inch inner flange dia. with [4] ½ inch dia. mounting holes. 2-1/4 inch adjacent, 3-1/4 inch opposite. [1] ½ inch FNPT air inlet. Overall dimensions: 1 foot 2-1/2 inches L x 11 inches W x 1 foot 8 inches H.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: SB1 ½-A. S/N: 368785. Type: SGN-5-SS. Maximum recommended air pressure: 100 PSI. Inlet/outlet: [1] 2 inch S-line. [1] 2-1/2 inch S-line. Overall dimensions: 3 feet 3 inches L x 1 foot 7-3/8 inches W x 3 feet 4-7/8 inches H.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: PB1-A. S/N: 331008. Type: TGN-1-PP. Maximum recommended air pressure: 100 PSI. Inlet/outlet: [2] 1-1/4 inch NPT. [1] ¾ inch FNPT air inlet. Overall dimensions: 1 foot 3 inches L x 10-1/2 inches W x 1 foot 7 inches H.

Used Warren Rupp Sandpiper® Double Diaphragm Pump

Used Warren Rupp Sandpiper® Double Diaphragm Pump. Model: PB1-A. Serial Number: 311803. Type: TGN-1-PP. Maximum recommended air pressure: 100 psi. Inlets/outlets: [2] 1 inches MNPT. [1] 5/8 inches MNPT. [1] ¾ inches MNPT. Overall dimensions: 1 feet 4 inches L. x 1 feet width. x 1 feet 10-1/4 inches height.

Used Warren Rupp Sandpiper® Double Diaphragm Pump with Tank

Used 2007 Warren Rupp Sandpiper® Double Diaphragm Pump with Tank. Model: S05B2P2TPNS000. Approximate pumping capacity: 14 gpm. Approximate tank capacity 32 gallons. Pump handles solids up to 0.125 inch [3mm] in size. Operating temperature ranges: 180°F to 32°F. Maximum recommended air pressure: 100 psi. Features a solid ball check valve powered by compressed air and of a 1:1 ratio design. Wetted material: polypropylene. Diaphragm / check valve materials of construction: Virgin PTFE-Santoprene / Backup Virgin PTFE check valve seat: Virgin PTFE. [1] ¾ inch MNPT inlet. [1] ¾ inch MNPT outlet. [1] ½ inch FNPT airline inlet. Overall pump dimensions: 10-1/8 inch Long x 7-1/8 inch Wide x 11-3/4 inch Height. Overall dimensions: 2 feet 10 inch Long x 2 feet 10 inch Wide x 3 feet 7 inch Height.[ACN7].

Used 2006 Warren Rupp Sandpiper® Double Diaphragm Pump

Used 2006 Warren Rupp Sandpiper® Double Diaphragm Pump. Model no. S05B2P2TPNS000. Approximate capacity: 14 gallons per minute. Handles solids up to 125 inches [3mm] in size. Operating temperature ranges: 180°F to 32°F. Maximum recommended air pressure: 100 psi. Features a solid ball check valve powered by compressed air and of a 1:1 ratio design. Wetted material: polypropylene. Diaphragm / check valve materials of construction: Virgin PTFE-Santoprene / Backup Virgin PTFE check valve seat: Virgin PTFE. [1] ¾ inches MNPT inlet. [1] ¾ inches MNPT outlet. [1] ½ inches FNPT airline inlet. Shipping weight: 16 pounds Overall dimensions: 10-1/8 inches L. x 7-1/8 inches width. x 11-1/8 inches H.[ACN7].

Used Sandpiper Containment Duty Diaphragm Pump

Used Sandpiper Containment Duty Diaphragm Pump. Model: ST1. Maximum capacity: 42 gallons per minute. Displacement per stroke: 0.09 gal. Maximum solids handled: 1/4 inches Maximum discharge pressure: 125 psi. Containment duty pumps are ideal for highly corrosive and hazardous chemical fluid requirements. All CD duty pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies. CD pumps are constructed of aluminum, cast iron, stainless steel alloy 'C', polypropylene, and kynar with TPE. Inlets: [1] 1/4 inches diameter NPT [female, for quick connect air fitting], [1] 1 inches diameter NPT [female]. Overall dimensions: 14 inches length x 11-1/2 inches width x 14 inches height.

Used Warren Rupp/SandPiper Aluminum Diaphragm Pump

Used Warren Rupp/SandPiper Aluminum Diaphragm Pump. Model SA3-A. Inlet/outlet- 4 inches, flanged. Adjustable flowrate: 0 to 260 gallons per minute. Solids handling up to nearly 3 inches Heads up to 125 psi or 289 feet of water. Overall dimensions: 35 inches length x 16 inches width x 33 inches height. Flap valve SA Series Sandpiper® pumps are especially recommended for slurries and liquids with suspended solids. Flap-valves allow passage of suspended line-size solids without damage. [ACN31a].