1991 Morris & Associates Ice-Master® Remote Ammonia Nugget Ice Maker. Model: NIM-RA-40LR. S/N: 384-1091. Capacity: 40 tons per day. Unit features: stainless steel sump, auger and discharge chute. Stainless steel double tapered patented tube design. Hot gas defrost. USDA approved. Water pump (amps): (460V)1.6. Auger (amps) 230V/460V: 9.6/4.8. Make-up water gpm:6.72. Bleed off water gpm: 1.79. Conveyor motor (auger): 3 HP. Water pump: 1 HP. Overall dimensions: 18 ft. L x 4 ft.1 in. W x 11 ft. 4 in. H. (ACN1216).
Hoshizaki Water Cooled Cube State Ice Maker. Model: KM-1201DWU. Flow rate: 4.3 gpm. (6) Evaporator Plates: 20 in. W x 15 in. H. Wash/Ice control switch. Continuous operation knob with (4) temperature levels. Electrical requirements: AC supply voltage 115/230 V, 3-wires, 60 Hz, 1 phase. Max. fuse size: 20 amps. Min. circuit ampacity: 20 amps. Design pressure hi/lo 270/225 psi, respectively. Refrigerant: R-502 (2 lbs. 7oz). Compressor, 230 V, 12 RLA, 57 LRA. (2) Pumps, 120 V (total), 2.6 FLA (total), 120 W. Inlets/outlets: (1) 1/4 in. dia. male ferrule cooling water outlet, (2) 3/8 in. dia. copper pipes. Overall dimensions: 53 in. L x 28 in. W x 31 in. H
North Star Ice M10 Flaked Ice Maker Refrigeration Package
Mfg: North Star Ice
Model:M1080S4
Stock No. LYNT002.
Serial: 4941
North Star Ice M10 Flake Ice Maker Refrigeration Package. Model: M1080S4. S/N: 4941. Nat'l Bd: 2665. Stainless steel construction. Capacity: 4.0 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon. MAWP @ 300 °F: 150 psi. Head thickness: 0.625 in. Dayton Motor, 1/3 hp, 1140/950 rpm, 208-230/460 V, 1.7-1.8/0.8 amps, 60/50 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8/19 rpm (final). Makes ice from fresh water, seawater or other liquids. Stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1 in. dia. pipe (media). Outlets: (1) 1/2 in. dia. pipe (media), (1) 2-1/2 in. dia. pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H.
North Star Equipment Ice Flaker System, Model M60-64
Mfg: North Star
Model:M60-64
Stock No. AAEC840.70
Serial: 35824-B
North Star Equipment Ice Flaker System. Model M60-64. Serial number: 35824-B. Carbon steel freezing surface area: 60 sq. ft. approximately 38.2 tons per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Total refrigeration load 45.83 tons at -30 °F evaporation temperature. Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Electra Gear Speed Reducer, 40 ratio, 43.125 rpm (final). Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Inlets: (1) 1 in. dia. feedwater pipe, (1) 1-1/2 in. dia. media port. Outlets: (1) 2-1/2 in. dia. wastewater, (1) 4 in. dia. media port, (1) 68 in. dia. discharge. Overall dimensions: 112 in. L x 76 in. W x 91 in. H. (ACN640).
1990 North Star Ice Flake Ice Maker. Model: M109S04. S/N: 6316. Capacity: 4.7 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon 22. MAWP @ 300 °F: 150 psi. MDMT @ 150 psi: -20 °F. Head thickness: 0.75 in. Shell thickness: 0.25 in. Coastline Refrigerant Receiver Tank, MAWP @ 650 °F: 150 psi, MDMT @ 150 psi: -20 °F. Leeson Motor, 1/3 hp, 1140 rpm, 208-230/460 V, 0.8 amps, 60 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8 rpm (final). Makes ice from fresh water, seawater or other liquids. 304-grade stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1-1/2 in. dia. Pipe (media). Outlets: (1) 3/4 in. dia. pipe (media), (1) 2-1/2 in. dia. Pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H. (ACN290-90).
Mann Hard & Son Inc. Ice Making Machine- 60 cu. ft. Model: 2000. Insulated ice bin has 3-door access. Ice is insulated by 3 in. walls. Machine uses (2) Ross Temperature Ice System Chillers, Model: RF-2051-UF-SS, S/N's: MG4127 and EH1163. Refrigerant: R-12. Refrigerant charge: 52 oz. Test pressure hi/low: 235/140 psi. Electrical requirements: 208/230 Volts, 60 LRA, 7.7 RLA, 60 Hz, single phase. Motor specifications: 1/5 hp, 1.0 FLA. Inlets: (2) 9 in. L x 5-3/4 in. overhead ports. Outlets: (3) 20 in. L x 40 in. H access doors. Overall dimension: 11 ft. 33 in. L x 78 in. W x 104 in. H.
North Star Ice Equipment Ice Flaker. Model: M60. Nominal capacity: 38 tons of ice per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Steel freezing surface area: 60 sq. ft. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Accumulator Tank- 50 Gallon, straight-wall dimensions: 2 ft. dia. x 2 ft. 2 in. L. Master Electric Motor, 20 hp, 1200 rpm, 230/460 V, 5.2/2.6 amps, 60 Hz, 3 phase, 3-3/4 in. dia. pulley. Falk Drive, ratio: 7.70, rating: 20 hp, final rpm: 155.84. Inlets: (1) 4 in. dia. port, (1) 5/8 in. dia. port, (1) 3/4 in. dia. port, (1) 1/2 in. dia. port. Outlets: (1) 2-1/2 in. dia. drain port, (2) 3/4 in. dia. ports. Overall dimensions: 9 ft. 8 in. L x 7 ft. 8 in. W x 7 ft. 5 in. H. (ACN640).
Mueller MaximICE® Ice Slurry System – 130 Tons. Model: ORE – 100. S/N: 231227-1. Capacity: 130 nominal tons. Utilizing stainless steel tubes and set up to run ammonia and glycol, the MaximICE® orbital pod evaporator (ORE) is breakthrough technology in ice crystal slurry generation that incorporates agitating rods to enhance the heat transfer effectiveness of multiple-tube heat exchangers and uses a water and freeze depressant mixture to produce a pumpable ice slurry which is ideal for applications using low-temperature air systems. Finally, a Plate Heat Exchanger separates the storage tank from the cooling load and prevents cross contamination between the ice-melting loop and the cooling load.(ACN850).
Mueller MaximICE® Ice Slurry System – 130 Tons. Model: ORE – 100. S/N: 231227-2. Capacity: 130 nominal tons. Utilizing stainless steel tubes and set up to run ammonia and glycol, the MaximICE® orbital pod evaporator (ORE) is breakthrough technology in ice crystal slurry generation that incorporates agitating rods to enhance the heat transfer effectiveness of multiple-tube heat exchangers and uses a water and freeze depressant mixture to produce a pumpable ice slurry which is ideal for applications using low-temperature air systems. Finally, a Plate Heat Exchanger separates the storage tank from the cooling load and prevents cross contamination between the ice-melting loop and the cooling load.(ACN850).
North Star Ice Machine. Model Cold-Spell, flaked ice machine with Master-Bilt insulated box with single door, unit sits in galvanized frame/stand with ladder
North Star Flake Ice Machine
Mfg:
Model:Cold Spell
Stock No. RBFM762.105
Serial:
North Star Flake Ice Machine. Model: Cold Spell.
North Star Ice Flaker Machine, Model M90
Mfg: North Star
Model:M90-82S4
Stock No. cSC502.200
Serial: 5264
North Star Ice Flaker Machine. Model M90-82S4. S/N 5264. 304 Stainless steel. 41 ton capacity output per day. (ACN920-82).
Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates
Mfg: Vogt Ice
Model:
Stock No. 300.280
Serial:
(120) Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates. Material of construction: 304 stainless steel. Number of corrugations: 16. These are designed to fit the Vogt Ice Turbo Ice Machine model: HP1000A SC. Inlets/outlets: (2) 1/2 in. dia. ports. Overall dimensions: 2 ft. 6-1/2 in. L x 1-1/2 in. W x 5 ft. 3 in. H.
Howe flake icemaker model no. 20EAR-D, no drive.
SOLD
SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15 SOLD
Mfg: Seattle Ice Equipment Corp.
Model:4x15
Stock No. LCNM008.
Serial: 213
Seattle Ice Equipment Corp. Glacier Icemaker Model 4x15, S/N 213. Manufactured date November 19,1980. National Board Number 2920. Union Tank Works, Inc. 150 psi @ 300°F-50°F @ -7.56 psi S/N 5158. Built in 1981. Baldor Motor, hp 1.3, Volts 208-230/460, Amps 5.0-4.8/2.4, 3 phase, rpm 1725. Overall Dimensions 94 in. W x 110 in. L x 99 in. H.
SOLD
SOLD Turbo Freon Refrigerated Ice Makers SOLD
Mfg: Turbo
Model:CF 80
Stock No. 600.Turbo.280
Serial:
(2) Turbo CF 80 freon refrigerated Ice makers rated at 40 tons each per 24 hour day. Includes a 300 ton FES screw package and Evapco Condenser complete set up for R-22, complete with a refrigerant receiver with all of the site columns, and isolation valves installed and capped . No starter. Can be divided into two seperate ice makers.
SOLD
SOLD Baltimore Aircoil Company Ice Storage, Model TSV-237MS, S/N 99209891, 8 ft. 2 in. x 10 ft. 7 in. x 7 ft. 10 in. COMPATIBLE WITH ALL CHILLER TYPES: These units are compatible with centrifugal, reciprocating and screw-type chillers since glycol design temperatures during the ice build mode are typically 22?F and higher. Verification of the combined performance of the thermal storage unit and the chiller is critical to successful system operation.
Similar to model TSU-237M with the following specifications: latent capacity 237 ton-hours, approx. shipping weight 9,750 lb; approx. operating weight 9,100 lb., tank water volume 2,990 gallons, coil glycol volume 260 gallons, connection size 2 in., unit width 7 ft. 10-3\8 in., unit length 10 ft. 7-5\8 in.
SOLD Kohtaki Dry Ice Former, Model: Shirorenga 80 SOLD
Mfg: Kohtaki
Model:Shirorenga 80
Stock No. tPPMI002.
Serial:
Kohtaki Dry Ice Former. Model: Shirorenga 80. Produces 7 in. L x 3 in. W x 1-1/4 H dry-ice blocks within (3) stainless steel dies. Dry-ice process: CO2 injection, pre-forming, compression, elevation, ejection. Unit features a Fuji Electric Counter and injection timer with a maximum set period of 60 sec. Removable access rear panels and top access cover allow for easy maintenance. Kataki Hydraulic Pump with 17-gallon reservoir tank. Mitsubishi Super Line Motor, 2.2 kW, 940/1120/1140 rpm, 200/200/220 V, 10.8/10/9.8 amps, 50/60/60 Hz, 3 phase. Inlets: (1) 1/2 in. dia. CO2 line, (1) 4-1/2 in. pipe fitting. Outlets: (1) 8 in. W x 2-1/2 in. H dry ice outlet. Overall dimensions: 50 in. L x 28 in. W x 51 in. H.
SOLD
North Star Flake Ice Maker. Model M60.78. S/N: 4401. Capacity @ -20 evaporated ammonia and with 60 °F water temperature: 34.7 U.S. tons/day. Carbon steel construction. Thickness of ice: 1.5 in. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrost cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Freezing surface area:78.5 sq. ft. Baldor Industrial Motor, 1 hp, 850 rpm, 230/460 V, 5/2.5 amps, 60 Hz, 3 phase. Electra Motor Drive, 20 ratio, 42.5 rpm (final). Inlets: (1) 2 in. dia. port (liquid), (1) 3 in. dia. refrigerant pipe. Outlets: (1) 2-1/2 in. dia. NPT (female), (1) 68 in. dia. ice discharge. Overall dim: 100 in. L x 100 in. W x 96 in. H.
SOLD
1990 North Star Flake Ice Maker. Model: M60.77. S/N: 4301. Nat'l Bd: 2278. Job No: 5576R. Repaired in April '92. Capacity @ -20 °F evaporated ammonia and with 60 °F water temperature: 34.7 U.S. tons/day. Carbon steel construction. Thickness of ice: 1.5 in. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrost cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Freezing surface area: approx. 78.5 sq. ft. Reliance Electric Motor, 1.5 hp, 1155 rpm, 230/460 V, 5/2.5 amps, 60 Hz, 3 phase. Electra Motor Drive, 60 ratio, 2.58 rpm (final). Inlets: (1) 1-1/2 in. dia. NPT (liquid, male), (1) 4 in. dia. port with a 7 in. L x 7 in. W flange and (4) 1 in. dia. attachment holes at a center-to-center distance of 5 in. Outlets: (1) 2-1/2 in. dia. NPT (waste-water, male), (1) 68 in. dia. ice discharge. Overall dim: 100 in. L x 100 in. W x 96 in. H.
SOLD
Union Tankworks Northstar Ice Maker. Model M-60.75, S/N 3933. National Board Number 1353. 150 psi @ 300°F -50°F @ -7.56 psi USC - 66. Overall dimensions 80 in. W x 104 in. L x 88 in. H.
SOLD
Scottsman Ice Machine. Model: AC25MWS-1A, S/N: 683295-04T. Test pressure: 140 low, 235 high. (2) fans. Compressor: 10.7 FLA, 51 LRA. AC supply voltage: 115. Min circuit ampacity: 14.4, Max fuse size: 15, 60 Hz, 1 phase. Overall dimensions: 36 in. L x 24 in. W x 39 in. H.
SOLD
SOLD Morris and Associates Nugget Ice Maker- 20 Ton SOLD
Mfg: Morris and Associates
Model:NIM-60H-20 /Icemaster
Stock No. DPFI796.8a
Serial: 487-593
Morris and Associates Nugget Ice Maker- 20 Ton. Model: NIM-60H-20. S/N: 487-593. Refrigerant: R-22. Factory charged: 210 lbs. Capacity: 20 tons of ice/day. Ideal for creating the clear, dry ice required by the packaged ice industry, this machine is flexible enough to also meet the needs of countless other industries, such as poultry, seafood, produce, pharmaceuticals, and concrete. Features (16) 6 in. dia. stainless steel, double-tapered evaporator tubes which produce hard, dry ice. Screw auger diameter: 8-1/2 in. dia. Screw auger housing diameter: 9-1/2 in. Screw auger length: 12 ft. 3 in. Copeland 8-Cylinder Semi-Hermetic Reciprocating Compressor, Model: 8DS1-6000-TSK-800, S/N: BT-97G05221S. Outlets: (1) 9-1/2 in. dia. screw auger discharge. Overall dimensions: 16 ft. 10 in. L x 39-1/2 in. W x 92-1/2 in. H. ACN870.
SOLD
Turbo Ice Machine. Model IGC225SCER. S/N 925460. Ice generation 217 tons ice at 95 degree condensing and 32 degree water to the plate. As chiller 341 tons chilling. 45 degrees water in and 33 degrees water out. (3) Royce C120 compressors each with 125 hp motor. Overall dimensions: 45 ft. L x 9 ft. 2 in. W x 7 ft. 7 in. H. Includes freon, all starters, disconnects, pumps, motors, and tanks.
SOLD Un-used North Star Flake Ice Maker, Model M10SS00 SOLD
Mfg: North Star
Model:M10SS00
Stock No. LYNT003.
Serial: 1064
Un-used North Star Flake Ice Maker. Model: M10SS00. S/N: 1064. Nat'l Bd: 1366. Stainless steel construction. Capacity: 4.7 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon 22. MAWP @ 300 °F: 150 psi. MDMT @ 150 psi: -20 °F. Head thickness: 0.75 in. Shell thickness: 0.25 in. Coastline Refrigerant Receiver Tank, MAWP @ 650 °F: 150 psi, MDMT @ 150 psi: -20 °F. Leeson Motor, 1/3 hp, 1140 rpm, 208-230/460 V, 0.8 amps, 60 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8 rpm (final). Makes ice from fresh water, seawater or other liquids. Stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1-1/2 in. dia. Pipe (media). Outlets: (1) 3/4 in. dia. pipe (media), (1) 2-1/2 in. dia. Pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H.
1998 Howe Ice Flake Machine. Model 2000-RL, S/N 010F98F1836, S.O. No: 30508. Ice production: 2,000 lb/day. Refrigerant: R-22. Ice enters through a 20 in. L x 15 in. W inlet into an accumulation chamber and exits through (2) 11-1/2 in. L x 9-1/2 in. W outlets. (2) 18 in. W x 14-1/2 in. H access doors, with sliding windows, allow access to chamber. Ice can be easily removed with (2) 6.2 cu. ft. capacity push carts with 3/4 in. dia. FPT bottom drains. Marathon Electric Motor: 1/3 hp, 1735 rpm, 115/208-230 V, 60 Hz, 1 phase. Winsmith 920 Motor Drive: 250 ratio, 1750 rpm (input), 6.94 rpm (output), 938 lb-in. torque. Inlets/outlets: (1) 1/4 in. dia. male ferrule, (1) 1/2 in. dia. barb fitting, (1) 1 in. dia. copper tubing. Overall dimensions: 60 in. L x 38-1/2 in. W x 108 in. H. (ACN135)
SOLD North Star Equipment Ice Flaker, Model M60-64 SOLD
Mfg: North Star
Model:M60-64
Stock No. AAEC841.70
Serial: 35824-B
North Star Equipment Ice Flaker. Model M60-64. S/N: 35824-B. Carbon steel freezing surface area: 60 sq. ft. approximately 38.2 tons per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Total refrigeration load 45.83 tons at -30 °F evaporation temperature. General Electric Motor, 1 hp, 1745 rpm, 230/460 V, 3.4/1.7 amps, 60 Hz, 3 phase. Electra Gear Speed Reducer, 40 ratio, 43.625 rpm (final). Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Inlets: (1) 1 in. dia. feedwater pipe, (1) 1-1/2 in. dia. media port. Outlets: (1) 2-1/2 in. dia. wastewater, (1) 4 in. dia. media port, (1) 68 in. dia. discharge. Overall dimensions: 112 in. L x 76 in. W x 91 in. H.
