1990 RVS-Evapco Various 350 Ton Ammonia Chiller Plus 100 Ton Glycol Chiller
Mfg: RVS
Model:
Stock No. DPPE3603.76
Serial:
1990 RVS-Evapco Various 350 Ton Ammonia Chiller Plus 100 Ton Glycol Chiller. This is a large skid system with two chillers mounted next to each other. 1st chiller- 350 Ton Ammonia Chiller. Mfg. RVS (Refrigeration Valve & Systems) Age 1990, National Board # 3217-21; w/ 4 Tube & Shell units 30 in. L x 12 in. dia; shell side rated 150 mawp @ 200 °F, tube side rated 100 mawp @ 200 °F, flood stage rated 150 mawp @ 200 °F; all units serial numbers from 90598-90602. Last used in food plant, w (1) 75 hp ID Pump. Model 4 x 3 x 8, and 91) 3 HP ID Pump model 3 x 1.5 x 8 . 2nd chiller- 100 Ton Glycol Recirculating Chiller. Mfg RVS, Age 1990, Nat Bd # 3222, S/N: 90603, Shell & tube rated shell side 150 psi @ 200 °F, tube side 100 psi@200 °F, 30’ L x 28” dia tube and sheel, suction side NB# 3223, s/n 90604, 150 psi@ 200 °F. last used in food plant. All above mounted to one skid, recently removed from service, ready for loading to your truck. Total skid Unit is approx 9 ft.8 in. x 32 ft.
1990 RVS Glycol and Ammonia Cooled Chiller - 100 Tons
Mfg: RVS
Model:
Stock No. DPPE3603B.
Serial: 90603 - 90605
1990 RVS Glycol and Ammonia Cooled Chiller - 100 Tons. S/N: 90603, Nat Bd # 3222. (184) 1-1/4 in. outer dia. x 24 ft. L. tubes. Rated shell side 150 psi @ 200 °F, tube side 100 psi @ 200 °F. Capacity: shell: ammonia: Flow: 833 lbs. / hr. Temperature: 26°F in and 26°F out. Tube: 30% propylene glycol: Flow: 51600 lbs. / hr. Temperature: 38 °F in and 28°F out. Liquid ammonia feed line to chiller is 3/4 in. dia. Integral refrigerant accumulator: S/N: 90604. Nat'l Bd: 3223. Capacity 80 gallons. 10-3/4 in. outer dia. x 20 ft. L. MAWP: 150 psi @ 200 °F. MDMT: -20 °F @ 150 psi. Horizontal oil pot: 90605. 6-5/8 in. x 20 in. Rated 150 psi @ 200°F. This was originally installed with Tropicana as part of their orange juice processing line. Total weight: 9600 lbs.
RVS Ammonia Cooled Juice Chiller-430 Ton. (4) stainless steel shell and tube chillers with refrigerant accumulator. Capacity: 430 tons. Chiller (4) pack: S/N's: 90598, 90599, 90600, 90601. Nat'l Bd: 3217, 3218, 3219, 3220. Each chiller has (186) 3/8 inner. dia. x 24 ft. L 304 stainless steel tubes housed in a 8-5/8 in. outer dia. shell. External tube surface: 436 square ft. Rated shell side: 150 psi @ 200 °F, tube side 100 psi@200 °F. Capacity: shell: ammonia: Flow: 23,450 lbs. / hr. Temperature: 26°F in and 26°F out. Tube: orange juice: Flow: 47878 lbs. / hr. Temperature: 153°F in and 35°F out. The liquid ammonia feed line to chiller set is 1-1/2 in. dia. Refrigerant Accumulator: S/N: 90602. 30 in. outer dia. x 18 ft. 6 in. L. Rated shell side: 150 psi @ 200°F. Horizontal oil pot: S/N:90696. 6-5/8 in. x 20 in. Rated 150 psi @ 200°F. This was originally installed with Tropicana as part of their orange juice processing line. Total weight: 9800 lbs.(ACN1000).
Vilter Shell and Tube Chiller with Surge Drum. S/N: B-69146-1. Nat'l Bd: 11.270. Ins: LMC-11.270V. Number of passes: 4. Number of tubes: 518. Tube dimensions: 1 in. dia. x 19 ft. 11-1/2 in. L. Heat transfer surface area: approx. 2,705 sq. ft. Tube volume: 420 gal. MAWP shell side: 200 psi @ 400 °F. Re-rated by Fru-Con Construction Corp., Nat’l Bd: 1173, Date altered: 9/2004. MAWP shell side: 80 psi @ -60 °F. Surge Drum- 615 gallons, inside straight-wall dimensions: 2 ft. 6 in. dia. x 16 ft. 11 in. L. Inlets: (1) 8 in. dia. flanged fitting, (4) 1-1/2 in. dia. ports, (2) 6 in. dia. ports. Outlets: (1) 8 in. dia. flanged fitting, (2) 2 in. dia. ports, (2) 2-1/2 in. dia. ports. Overall dimensions: 22 ft. 5 in. L x 5 ft. 8 in. W x 8 ft. 7 in. H.
(10) Un-Used Stainless Steel Evapco Fluid Coolers / Evaporative Condensers Model: ATW-207 C. The galvanized coils include both extended surface coils for dry operation during cool months and high efficiency Thermal-Pak® Coils. Rated at 827 tons for Freon 22 with a wet bulb 74 and 105 condensing. These units were installed but never commissioned at Global Crossing/ Worldcom’s headquarters building near Boston, Mass.
1996 Refrigeration Valves and Systems Corp. Shell and Tube Heat Exchanger - 80 Tons
Mfg: Refrigeration Valves and Systems Corp.
Model:Precision
Stock No. HDCS244.9
Serial: 96407 and 96408
1996 Refrigeration Valves and Systems Corp. Shell and Tube Heat Exchanger. Model: Precision. S/N's: 96407 and 96408. Nat'l Bd: 9028 and 9029. Capacity: 960,000 btu/hr = 80 tons of refrigeration. Tube material: SA214-ERW. Number of passes: 4. Number of tubes: 180. Tube dimensions: 3/4 in. dia. x 15 ft. L. Heat transfer surface area: approx. 530 sq. ft. Tube volume: 60 gal. Shell side MAWP: 250 psi @ 200 °F. Shell side MDMT: 250 psi @ -20 °F. Tube side MAWP: 100 psi @ 200 °F. Tube side MDMT: 250 psi @ -20 °F. Surge Tank- 85 Gallon, inside straight-wall dimensions: 1 ft. 2 in. dia. x 11 ft. L. Inlets: (2) 1-1/4 in. dia. liquid refrigerant feed ports, (1) 4 in. dia. flanged liquid port. Outlets: (1) 3/4 in. dia. liquid drain port, (1) 3 in. dia. refrigerant suction port, (1) 4 in. dia. flanged liquid port. Overall dimensions: 16 ft. 4 in. L x 5 ft. W x 8 ft. 4 in. H. (ACN237)
Applied Process Equipment Recirculating Air-Cooled Water Chiller- 5 Ton
Mfg: Applied Process Equipment
Model:QAC-5
Stock No. DCBJ887.29
Serial: 863059
Applied Process Equipment Recirculating Air-Cooled Water Chiller- 5 Ton. Model: QAC-5. S/N: 863059. System electrical requirements: 208 V, 29.4 amps, 60 Hz. Copeland Compressor, Model: CR1-0500-TF5, S/N: 86F11745H, requirements: 200/240 V at 50 Hz, 200/230 volts at 50 Hz, refrigerant R-22. Pump model: AE211, 1/2 hp, 1.8 amps. Evaporator panel dimensions: 62 in. L x 42-1/2 in. W. Oil separator tank, MAWP: 400 psi at 150 °F, MDMT: 20 °F at 400 psi., pressure relief valve: 400 psi. Chiller barrel dimensions: 25 in. L x 12 in. diameter (insulated). Control box, return water temperature gauge, pump pressure, R-22 gauge. Oversized shell and tube heat exchangers provide maximum heat transfer surface. Water or water/glycol temperatures from 0 °F to 60 °F. Chiller inlet/outlet: 2 in. threaded (female), water inlet/outlet: 1-1/2 in. diameter copper pipe. Overall dimensions: 76 in. L x 36 in. W x 80 in. H.
1994 KHS Ziemann-Liess Shell and Tube Heat Exchanger
Mfg: KHS Ziemann-Liess
Model:
Stock No. BIIR7007.
Serial: 270132
1994 KHS Ziemann-Liess Shell and Tube Heat Exchanger. S/N: 270132. 304/ A-516 stainless and carbon steel construction. Number of tubes: 104. Tube dimensions: 3/4 in. dia. x 156 in. L. Outer tube diameter 0.997 in. Heat transfer surface area: approx. 357 sq. ft. Volume: approx. 41 gal. Shell side MAWP: 230 psi. Tube side MAWP: 100 psi. MDMT: 24.8 °F. Refrigerant Receiver Tank- 450 Gallon. Inlets: (1) 3 in. dia. threaded fitting (product), (1) 6 in. dia. media port with a 12 in. dia. flange and (8) 1 in. dia. thru holes at a center-to-center distance of 3-3/4 in. Outlets: (2) 1 in. dia. media discharge ports each with a 2-bolt flange with 1/2 in. dia. thru holes at a center-to-center distance of 2-3/4 in., (1) 1-1/2 in. dia. media discharge port with a 4 in. L x 4 in. W flange and (4) 1/2 in. dia. thru holes at a center-to-center distance of 2-1/2 in., (1) 3 in. dia. threaded fitting (product). Overall dimensions: 16 ft. 2 in. L x 56 in. W x 10 ft. 2 in. H.
1995 Cimco-Lewis Shell and Tube Heat Exchanger. S/N 207810. Nat'l Bd: 930. Shell side MAWP @ 200 °F: 300 psi. Tube side MAWP @ 150 °F: 150 psi. MDMT @150 psi: -20 °F. Number of tubes: 452. Tube dimensions: 3/4 in. dia. x 191 in. L. Heat transfer surface area: approx. 1,412 sq. ft. System comes with a complete Cimco Refrigeration Control Panel. Refrigerant: R-22. Refrigerant charge: 2,500 lbs. Panel features (2) thermostat controls for (1) ice and (2) brine. Inlets: (1) 8 in. dia. bypass valve, (3) 4 in. dia. pipes (media). Outlets: (1) 3/4 in. dia. pipe with a 2 bolt square flange, (1) 8 in. dia. pipe with 13 in. dia. flange (8) 3/4 in. dia. hole at a center to center distance of 12 in. (452) 3/4 in. dia. x 191 in. L = 1440 sq. ft. Overall dimensions: 17 ft. 9 in. L x 43 in. W x 65 in. H. (ACN571).
1994 Multistack / Thermal Care Chiller Package. Model: MS50BH12W / TMW50. (2) 24 ton Bristol compressors. Model: H2NG294DPEF. Compressor #1: S/N: 16797030899; Compressor #2: S/N: 27000007972. Refrigerant: R-22. 460 V, 60 Hz, 3 phase, 200 LRA. (2) 1994 Plate heat exchangers certified by SWEP AG, Type: B45 x 060. Plate heat exchanger #1: S/N 29406-16060-0077. Plate Heat Exchanger #2: S/N 29406-16060-0054. MAWP: 368 psi @ 365 °F, MDMT: -319 °F @ 346 psi. Plate pack dimensions: 6 in. L x 9-1/2 in. W x 20-1/2 in. H. Inlets/outlets: (2) 6-1/2 in., (2) 3 in., (2) 2 in. Overall dimensions: 62-1/2 in. L x 57 in. W x 63 in. H. The units are industrial design water or brine chillers utilizing scroll type compressors. The package is good for process chilling out of the range of an off the shelf unit and has water regulating valves for low condenser water temperature. This package can operate as a single unit or with two different solutions, if necessary. Capacity will vary based on conditions, but the unit is approximately 50 tons. (ACN456)
1990 Vilter 8-Pass Shell and Tube Heat Exchanger. S/N: F60598. Nat'l Bd: 36773. Media: Glycol. Shell side MAWP @ 400 °F: 300 psi. Tube side MAWP @ 400 °F: 350 psi. Shell side MDMT @ 300 psi: -20 ° F. Tube side MDMT @ 250 psi: -20 °F. Diameter of inner tubes: 1 in. Length of inner tubes: 18 ft. 4 in. Heat exchanger is equipped with a parallel-mounted 200 gallon media feed tank. Inlets: (1) 4 in. dia. pipe (product), (2) 4 in. dia. pipe (media). Outlets: (1) 4 in. dia. pipe (product), (1) 1-1/2 in. dia. pipe (media). Overall dimensions: 23 ft. L x 48 in. W x 92 in. H.
Mayer Refrigeration Engineers Inc. Water Cooled Chiller Package- 40 Ton
Mfg: Mayer Refrigeration Engineers Inc.
Model:5W-APS
Stock No. ACEU75
Serial: 808119
Mayer Refrigeration Engineers Inc. Water Cooled Chiller Package- 40 Ton. Model: 5W-APS, S/N: 808119. Refrigerant: R-12, charge: 50 lbs. Carrier compressor- 40 hp, Model: 5H60, S/N: 980458. Compressor motor: Magnetek, 40 hp, 1765 rpm, 230/460 V, 96/48 amps, 60 Hz, 3 phase. Final speed after pulley: 1427 rpm. Shell & tube water cooled condensor: MAWP: 350 psi @ 150 °F, MDMT: 150 °F @ 350 psi. Dimensions: 11 in. dia x 66 in. L. Cooler is shell & tube dry expansion type, rubber insulated. Storage tank is rubber insulated, vinyl lined. Overall dimensions: 142 in. L x 51 in. W x 65 in. H. This is an industrial design open drive chiller package. The unit can be used on R-12 as designed or converted to R-22. The condenser may be changed to accommodate high temperature chilling on R-22. The unit is excellent for brine or glycol chilling. Capacity is between 30-50 tons.
Berg Chilling Systems Chilled Water Pump Tank- 1,400 Gallon
Mfg: Berg Chilling Systems
Model:CT666-2(10xBx215xB)
Stock No. DOLP011E.
Serial: A012B-BD1-0897
Berg Chilling Systems Chilled Liquid Pump Tank- 1,400 Gallon. Model: CT666-2(10xBx215xB). S/N: A012B-BD1-0897. Stainless steel construction. Inside straight-wall dimensions: 6 ft. L x 6 ft. W x 5 ft. 10 in. H. System requirements: 460 V, 95 amps, 60 Hz, 3 phase. Controls: 120 V, 6 amps, 60 Hz, single phase. (6) Scot Centrifugal Pumps, Models: (1) 56/5.00, (2) 56/5.125, (2) 54/6.50, (1) 54/6.125. (4) Baldor Industrial Motors, 10 hp, 3450 rpm, 230/460 V, 24/12 amps, 60 Hz, 3 phase. (2) Lincoln Electric Motors, 10 hp, 3455/3400 rpm, 230/460-208 V, 24.6/12.3-27.5 amps, 60 Hz, 3 phase. Inlets: (1) 1 in. dia. port (make-up), (2) 4 in. dia. ports (liquid feed), (1) 7 in. L x 7 in. W liquid feed port. Outlets: (1) 2 in. dia. FNPT (drain), (1) 3 in. dia. overflow port, (2) 4 in. dia. Victaulic fittings. Overall dimensions: 14 ft. 3 in. L x 7 ft. 6 in. W x 6 ft. 5 in. H.
Carbon Steel Glycol Cold Well Tank-500 Gallon. Ingersoll-Dresser Centrifugal Pump, Model: D824, S/N: 873064, Size: 3x2x6. Baldor Electric Motor, 10 hp, 3450 rpm, 208-230/460 V, 26.5-24/12 amps, 60 Hz, 3 phase. Inlets: (2) 6 in. dia. ports, (1) 3 in. dia. port, (1) 1 in. dia. S-Line, (1) 4 in. dia. S-Line. Outlets: (2) 1-1/4 in. dia. ports, (1) 4 in. dia. 150lb ANSI flange. Inside straight wall dimensions: 3 ft. 5 in. dia. x 7 ft. 6 in. H. Overall dimensions: 5 ft. L x 5 ft. W x 8 ft. 9 in. H.
Rectangular Stainless Steel Storage Tank. Dimensions 7-1/2 ft. x 7-1/2 ft. x 8 ft. & (1) 7 ft. dia x 8 ft. straight side vertical carbon steel storage tank with connecting pumps.
SOLD Trane 30 Ton Freon Glycol Chiller Package SOLD
Mfg:
Model:
Stock No. DBHK204.0
Serial:
Trane 30 Ton Freon Glycol Chiller Package, Model CAUCC 204IC03, S/N J94H82269, 1994, 460 volt, motor 60 hp 230/460, 16 ft. 9 in. L x 7 ft. 10 in. W x 6 ft. 7 in. H.
SOLD
SOLD APV Glycol System with Plate Heat Exchanger SOLD
Mfg: APV
Model:l9RGNMGS75
Stock No. 195.GR973b.50
Serial: 33312.1
APV Model l9RGNMGS75 epoxy coated frame tie bar take up ammonia/glycol laser welded plate heat exchanger skid mounted including ammonia evaporator flooded system with controls. Duty to cool 660,400 lbs/hr of propylene glycol from 30 to 20 degrees f. Utilizing 21,128 lbs/hr or r-717. Mfg. 1997. Serial Number 33312.1. "As Is".
SOLD
SOLD Thermal Care/Mayer Water Cooled Chiller Package - 40 Ton SOLD
Mfg: Thermalcare/Mayer
Model:
Stock No. ACEU72
Serial: 51-307-921-681
Thermal Care/Mayer Water Cooled Chiller Package - 40 Ton. Model: 5WNX, S/N: YT12016. Refrigerant: R-22. Carlyle Compressor- 40 hp, Model: 5H46-149, S/N: 2486J01835. Compressor motor: Allis Chalmers, 40 hp, 1760 rpm, 230/460 V, 93/46.5 amps, 60 Hz, 3 phase. Final speed after pulley: 1173 rpm. Water reservoir tank: 130 gallon. Water cooled condensor. Inlet: 4 in. flanged. (4) Outlets: 4 in., 6-1/2 in. flanged, 3 in. threaded, 1-1/2 in. threaded. Overall dimensions: 167 in. L x 60 in. W x 79 in. H.
SOLD
SOLD Thermalcare/Mayer Chill Water Tank and Circulating Pumps SOLD
Mfg: Thermalcare/Mayer
Model:PT1800Z
Stock No. ACEU67
Serial: TK-62652
Thermal Care/Mayer Chill Water Tank and Circulating Pumps. Model PT1800Z, S/N TK-62652. Fla 168, 460 V, 3 phase, 60 Hz . Tank dimensions: 8 ft. L x 6 ft. W x 6 ft. H. Process Pumps: (4) 25 hp, recirculating pumps, 4 in. inlet and outlet, have valves connected to 6 in. vitaulic header. Magnelek-M Century Pump Motor: (2) 20 hp, frame S256G, 1,740 rpm, 230/460 V, 3 phase, 60 Hz. Centrifugal pumps/recirculating pumps: inlet/outlet 6 in. flanged, connected to vitaulic header.
SOLD
SOLD Wolf-Tec/Cooling-Tech Air Cooled Glycol Chiller- 20 Ton SOLD
Mfg: Wolf-Tec/Cooling-Tech
Model:Polar
Stock No. DPFI350b.8a
Serial:
Wolf-Tec/Cooling-Tech Air Cooled Glycol Chiller- 20 Ton. Model Polar. Bitzer compressor. Model 6J-22.2. Refplus condenser CID020-9. setup for R22. 460 V. Currently setup to cool to 32 °F. Overall dimensions skid: 12-1/2 ft. L x 4-1/2 ft. W x 8 ft. H. Nameplate n/a.
SOLD
SOLD Niagara No Frost Concentrator Stainless Steel SOLD
Mfg: Niagara
Model:9004
Stock No. EECS368.3
Serial: 6322196
Niagara No Frost Concentrator Stainless Steel, Model 9004, S/N 6322196.
SOLD
SOLD Thermal Care/Mayer Water Recirculation System- 700 Gallon SOLD
Mfg: Thermal Care/Mayer
Model:FTS-60X
Stock No. DRGP028.8
Serial: TS26128
Thermal Care/Mayer Water Recirculation System- 700 Gallon. Model: FTS-60X. S/N: TS26128. Inside dimensions: 70 in. L x 49 in. W x 48 in. H. Thermal Care/Mayer Centrifugal Pump. Dayton Motor, 10 hp, 3495 rpm, 208-230/460 V, 27.6-24.4/12.2 amps, 60 Hz, 3 phase. Electrical requirements: 460 V, 60 Hz, 3 phase. Inlets (2) 4 in. dia. PVC pipes. Outlets: (1) 3 in. dia. PVC pipe, (2) 3/4 in. dia. make-up port. Overall dimensions: 95 in. L x 94 in. W x 63 in. H.
SOLD Un-Used Trane Process Cooling Chilled Water Pump Tank- 220 Gallon SOLD
Mfg: Trane
Model:CTNK325
Stock No. LKVW003.
Serial: M40683-04/80
Un-Used Trane Process Cooling Chilled Water Pump Tank- 220 Gallon. Model: CTNK325. S/N: M40683-04/80. Tank dimensions: 36 in. L x 23-1/2 in. W x 60 in. H. Power supply: 460 V, 28.5 amps, 60 Hz, 3 phase. (2) Scot Pumps, Model: 54F, impeller diameter: 6 in., capacity: 192 gpm @ 120 tdh. Weg Motors: 10 hp, 3510 rpm, 208-230/460 V, 26.8-24.4 amps, 60 Hz, 3 phase. Water circulates from the pump tank to the chiller and then to the process via the recirculation pump. The standby pump is energized when there is a drop in the pressure. Inlets: (1) 1/2 in dia. FNPT water make-up ball valve, (1) 3 in. dia., 4-bolt flanged port. Outlets: (1) 3 in. dia., 4-bolt flanged port, (1) 3 in. dia. FNPT (overflow). Overall dimensions: 87-1/2 in. L x 41 in. W x 71 in. H.
SOLD Thermal Care/Mayer Chilled Water Recirculation Tank- 270 Gallon SOLD
Mfg: Thermal Care / Mayer
Model:
Stock No. DRGP068.1
Serial: CW96928
Thermal Care/Mayer Chilled Water Recirculation Tank- 270 Gallon. S/N: CW96928. The most complete line of pre-engineered systems for cooling tower and central chiller applications providing the highest quality design and construction features available. (1) Thermal Care/Mayer Centrifugal Pump, Model: 52. (1) Scot Centrifugal Pump, Model: RE 252, S/N 3083-K4-B76. (2) Baldor Motors, 10 hp, 3450 rpm, 208-230/460 V, 27-25/12.5 amps, 60 Hz, 3 phase. Inlets: (1) 4 in. dia. port. Outlets: (1) 2 in. threaded male (pump discharge), (1) 2 in. threaded female (pump discharge), (1) 1/4 in. overflow release valve. Overall dimensions: 72 in. L x 58 in. W x 52 in. H.
Chilled Water System- 1100 Gallons. Systems consists of (2) Peerless centrifugal pumps and a chilled water receiving tank. (2) Peerless Centrifugal Pumps with Motors, Model: F2-1230AM, S/N's: 199843 & 162648A, 30 hp, 1760 rpm, 230/460 V, 76/38 amps, 60 Hz. Pump capacity (each): 223 gpm at 1760 rpm. Outlets (tank): (2) 6 in. dia. ports with 14 in. dia. flanges and (8) thru-holes at a center-to-center distance of 13 in. Overall dimensions (container): 76 in. L x 61 in. W x 79 in. H. Pump inlets: (1) 4-1/2 in. dia. suction with a 9 in. dia. flange and (8) thru-holes at a center-to-center distance of 8 in. Pump outlets: (1) 3 in. dia. discharge with a 7 in. dia. flange and (4) thru-holes at a center-to-center distance of 6 in. Overall dimensions (pump): 49 in. L x 23 in. W x 24 in. H.
Chilled Water/Glycol Tank- 400 Gallon. Inside dimensions: 60 in. L x 35 in. W x 47 in. H. 3/8 in. W x 47 in. H baffle located at tank mid-section. Inlets: (2) 3/4 in. dia. ports, (2) 1-1/2 in. dia. ports, (1) 2 in. dia. port, (1) 2-1/2 in. dia. port. Outlets: (1) 3/4 in. dia. NPT (male), (1) 1-1/2 in. dia. NPT (male), (1) 1-1/2 in. dia. port, (1) 2 in. dia. butterfly valve (tank discharge). Overall dimensions: 68 in. L x 45 in. W x 58 in. H.
Chilled Water System- 1100 Gallons. Systems consists of (2) Peerless centrifugal pumps and a chilled water receiving tank. (2) Peerless Centrifugal Pumps with Motors, Model: F2-1230AM, S/N's: 199843 & 162648A, 30 hp, 1760 rpm, 230/460 V, 76/38 amps, 60 Hz. Pump capacity (each): 223 gpm at 1760 rpm. Outlets (tank): (2) 6 in. dia. ports with 14 in. dia. flanges and (8) thru-holes at a center-to-center distance of 13 in. Overall dimensions (container): 76 in. L x 61 in. W x 79 in. H. Pump inlets: (1) 4-1/2 in. dia. suction with a 9 in. dia. flange and (8) thru-holes at a center-to-center distance of 8 in. Pump outlets: (1) 3 in. dia. discharge with a 7 in. dia. flange and (4) thru-holes at a center-to-center distance of 6 in. Overall dimensions (pump): 49 in. L x 23 in. W x 24 in. H.
SOLD Thermal Care/Mayer Water Recirculation System-1,600 Gallons SOLD
Mfg: Conair/ Thermolator
Model:
Stock No. DRGP071.4
Serial:
Thermal Care/Mayer Water Recirculation System-1,600 Gallons. Inside dimensions: 72 in. L x 72 in. W x 72 in. H. Compartment dimensions: 72 in. L x 36 in. W x 72 in. H. (2) Goulds Centrifugal Pumps, Index No: 14A117535A, impeller diameter: 8 in. (2) Baldor Industrial Motors, 7-1/2 hp, 1725 rpm, 208-230/460 V, 23-22/11 amps, 60 Hz, 3 phase. Thermal Care/Mayer Centrifugal Pump and Motor, 5 hp, 3490 rpm, 208-230/460 V, 14.4-12.8/6.4 amps, 60 Hz, 3 phase. Inlets: (2) 6 in. dia. PVC pipes (water infeed). Outlets: (1) 1-1/2 in. dia. water make-up port, (1) 2 in. dia. PVC pipe (water supply), (1) 3 in. dia. PVC pipe (water overflow), (1) 4 in. dia. PVC pipe (water supply). Overall dimensions: 11 ft. 9 in. L x 100 in. W x 10 ft. 4 in. H.
SOLD Baltimore Aircoil Company Remote Sump Tank- 212 Gallon SOLD
Mfg: Baltimore Aircoil Company
Model:RS-212
Stock No. HDSP176.1
Serial: 97414641
Baltimore Aircoil Company Remote Sump Tank- 212 Gallon. Model: RS-212. S/N: 97414641. Inside dimensions: 3 ft. 7 in. L x 2 ft. 7 in. W x 3 ft. 2 in. H. Inlets: (1) 1 in. dia. NPT (float cut-off), (1) 3 in. dia. NPT fitting. Outlets: (1) 2 in. dia. NPT with ball valve, (1) 4 in. dia. NPT with butterfly valve. Overall dimensions: 3 ft. 10-1/2 in. L x 3 ft. 3 in. W x 4 ft. 3 in. H.
