(10) 2000 Un-Used Stainless Steel Evapco ATW Series Fluid Cooler/Evaporative Condenser- 827 Nominal Tons. Model ATW – 207C. S/N: T000388. This unit was installed but never commissioned at Global Crossing / WorldCom’s headquarters building near Boston, Massachusetts. For Freon 22 it is rated at 827 tons with a 74°F wet bulb and 105 °F condensing. For ammonia it is rated at 587 tons with a 74°F wet bulb and 95°F condensing. As a fluid cooler it is rated for 383 gpm with a 74°F wet bulb and 95°F entering temperature and 85°F leaving temperature. The galvanized coils feature both extended surface coils and Therma-Pak®, elliptical coils. For many of the cooler months the extended surface coils can be used for dry operation. Cost new was just less than $150,000 each.
Baltimore Aircoil Company Evaporative Condensers - 570 Ton
Mfg: Baltimore Aircoil Company
Model:VXMCN570
Stock No. 125.Rd0063
Serial: 830805P
(2) Baltimore Aircoil Company Evaporative Condensers – 570 ton. Model: VXMCN570. S/N's: 830805P, N/A. Nominal Capacity: 570 tons. Uniquely designed as two, side by side connected units, these are capable of being divided operationally into individual units, each with one fan and coil section. Nominal capacity of one section is 285 tons. As single, axial fans are located on the ends and not on the sides of each unit, they can be placed closed to walls or set-backs for narrow, space limiting applications. The condensing coil is all prime surface continuous serpentine steel tubing that is tested with air to 375 psig (2687 kPa) underwater and is designed for low pressure drop with sloping tubes. Water distribution system consists of a galvanized header and schedule 40 PVC spray branches with large diameter, non-clog, plastic spray nozzles oriented for optimum wetting of the coil under all operating conditions. Water pump is a close-coupled, bronze-fitted, centrifugal pump with a mechanical seal. BAC evaporative condensers provide heat rejection for many types of systems in the HVAC and light industrial markets. Belt No: 3R150. Inlets: (2) 3 in. dia. refrigerant pipes, (1) 4 in. dia. PVC pipe. Outlets: (2) 3 in. dia. refrigerant pipes, (1) 4 in. dia. PVC pipe Overall dimensions: 22 ft. 3 in. L x 7 ft. 3 in. W x 13ft. H. (ACN510-83).
Imeco Inc. Fluid Cooler, Model HEFCC 122.4, S/N 3209.1, 122 Ton
SOLD
SOLD BAC Fluid Cooler SOLD
Mfg:
Model:VX12102R
Stock No. 200.ACEU915
Serial: 842293P
BAC Fluid Cooler, Model VX12102R, S/N 842293P, Belt B128, 2 units that can be run together or split that measure 6 ft. x 18 ft. x 8 ft. each. These are rated at about 250 tons each.
SOLD
SOLD Evapco Fluid Cooler
Mfg: Evapco
Model:PMWA-116D
Stock No. WC1.5
Serial: 870261
Evapco Fluid Cooler, Model PMWA-116D, S/N 870261, belt no. 2B-136, coil test pressure: 350 PSIG.
SOLD
SOLD Baltimore Aircoil Company Evaporative Condenser-1800 Tons
Mfg: Baltimore Aircoil Company
Model:VC2-1504
Stock No. ASLC001.
Serial: 94201483
Baltimore Aircoil Company Evaporative Condenser-1800 Tons. Model VC2-1504. S/N 94201483. Belt No. 3BP150. With pan heaters, 22,792.5 mbh @ 95°F condensing and 66°F wetbulb. Dimensions 35 ft. 6 in. L x 11 ft. 10 in. W. Estimated cost new $115,000.
SOLD
SOLD Baltimore Aircoil Company Evaporative Condenser-1240 Tons
Mfg: Baltimore Aircoil Company
Model:VC2-982
Stock No. ASLC002.
Serial: 94201484
Baltimore Aircoil Company Evaporative Condenser-1240 Tons. Model VC2-982. S/N 94201484. Belt No. 2BP150. With pan heaters, 14,882 mbh @95 °F condensing and 66 °F wetbulb. Estimated cost new $75,000.
SOLD
SOLD Unused Evapco Stainless Steel Hydrochiller Coil SOLD
Mfg: Evapco
Model:ATW 414B
Stock No. DEME2760B.278a
Serial: 969941P3
Unused Evapco Stainless Steel Hydrochiller Coil. Model ATW 414B, S/N 969941P3. Capacity: 8,071,614 MBH (1667 gpm, 95 °F in; 86 °F out; 68 °F WB). Hydrochillers can be used to economically cool raw and fresh processed vegetables, fruits, and seafood. Fresh produce, fruit, berries, and shellfish harvested at 70-90 °F can be quickly cooled to temperatures that slow the ripening process and extend shelf life. In addition, these systems can quickly cool temperatures to stop the cooking process, improve color and texture, and reduce energy requirements for freezing.Coils dimensions 18 ft. L x 11 ft. 10 in. W x 68 in. H.
SOLD Recold Evaporative Condenser Model JC 320 SOLD
Mfg: Recold
Model:JC 320
Stock No. ME0305b.
Serial: 89338
Recold Evaporative Condenser Model JC 320. S/N 89338. Capacity 4,689,300 BTUH. Dimensions: 217 in. L x 93-1/2 in. W x 98 in. H. Operating Weight 10,880 lbs. Holds 455 lbs of Freon R-22. 140 tube circuits. Fan 30 hp 52,300cfm. Top is galvanized. Coil is copper and has been capped.
SOLD 1993 Baltimore Aircoil Company Evaporative Condenser SOLD
Mfg: Baltimore Aircoil Company
Model:F 1342-M
Stock No. LCTC001.
Serial: 93200984
1993 Baltimore Aircoil Company Evaporative Condenser. Model F 1342-M, S/N: 93200984. (BAC VC1N208). Belt No: B136. Rated at 215 tons freon and 155 tons ammonia. Capacity: 425 gpm water from 103 ºF to 90 ºF at 70 ºF entering wet bulb and 4.1 psi fluid pressure drop. Airflow: 44,000 cfm. Heat rejection: 212,400 Btu/hr. Fan motors: (1) 20 hp, 1800 rpm, 3 phase, 60 Hz, 230/460, 480 V. BAC Centrifugal Spray Pump, S/N: NHM011493E, capacity: 304 gpm @ 15.4 tdh, impeller diameter: 8.4 in. U.S. Motor, 2 hp, 1725 rpm, 60 Hz, 208-230/460 V, 6.2/3.1 amp, 3 phase. Inlets: (1) 3 in. dia. PVC pipe (water), (2) 4 in. dia. refrigerant pipe. Outlets: (2) 4 in. dia. refrigerant discharge. Overall dimensions: 13 ft. 6 in. L x 94 in. W x 11 ft. 8 in. H.
SOLD Evapco Fluid Cooler/Evaporative Condenser SOLD
Mfg: Evapco
Model:LSWA20AA2
Stock No. KRZY001.10
Serial: 969088W
Evapco Fluid Cooler/Evaporative Condenser . Model LSWA20AA2. S/N. 969088W. Marathon Electric Jet Pump. 1-1/2 hp, 3450 rpm, 208-230/460 V, FLA-4.9-5.0/2.5, SF-1.3, SFA-5.9-5.8/2.9, code J, 60 Hz, FR-565-65, 3 phase, type TS. Approximate Dimensions 12 ft. L x 4.5 ft. W x 7 ft. H.
SOLD 2001 Baltimore Aircoil Company Evaporative Condenser- 487 Ton SOLD
Mfg: Baltimore Aircoil Company
Model:VC1-487
Stock No. LPMC001.110
Serial: V012959401
2001 Baltimore Aircoil Company Evaporative Condenser- 487 Ton. Model: VC1487. S/N: V012959401. Belt No: B158. Airflow: 77,500 cfm. Internal coil volume: 72 cu. ft. Nominal tons are based on using refrigerant R-22 at a 105 °F condensing temperature, a 40 °F suction temperature, and a 78 °F wet-bulb temperature. Nominal tonnage using refrigerant R-717 at a 96.3 °F condensing temperature, a 20 °F suction temperature, and a 78 °F wet-bulb temperature, 345 Tons. U.S. Motor, 40 hp, 1775/1465 rpm, 230/460-190/380 V, 92/46-113/56.7 amps, 60/50 Hz, 3 phase. (5) Spray lines. VCI units are suitable for indoor and outdoor installation and offer minimal sound levels. Series V Evaporative Condensers deliver fully rated thermal performance over a wide range of heat rejection and temperature requirements. In an indoor environment the centrifugal fans can overcome the static pressure imposed by external ductwork. Inlets: (2) 4 in. dia. media pipes. Outlets: (2) 4 in. dia. media pipes. Overall dimensions: 12 ft. L x 11 ft. 8 in. W x 14 ft. 5 in. H.
SOLD Baltimore Aircoil Company Evaporative Condenser-15 Ton SOLD
Mfg: Baltimore Aircoil Company
Model:VNC15
Stock No. ACEU845
Serial: 764435P
Baltimore Aircoil Company Evaporative Condenser-15 Ton. Model: VNC15, S/N: 764435P. Belt: B73. Airflow: 3800 cfm. (192) 1 in. dia. x 2 ft. 3 in. L tubes. Tube construction: galvanized steel. Inlets/outlets: 2 in. drain, 2 in. overflow, 1 in. makeup, (2) 3 in. refrigerant in/out, (2) 17 in. dia. manways. (1) 14 in. dia. Centrifugal fan. Pump motor: 1/3 hp, 3,450 rpm, 208-220/460 V, 1.8/0.9 amps, 60 amps, 3 phase. Pump inlet: 1-1/2 in.; outlet: 1 in. Fan motor: 3 hp. Pulley ratio: 3.2:1. Overall dimensions: 4 ft. L x 4 ft. W x 6 ft. 11 in. H.
