Moyno Sanitary Progressing Cavity Pump Model FA1CSSE3
Mfg: Moyno
Model:FA1CSSE3
Stock No. HDNW046.8a
Serial: AM17013-2
Moyno Sanitary Progressing Cavity Pump. Model FA1CSSE3. S/N AM17013-2. 304 Stainless steel Shaft with 316 Stainless steel Shaft Housing, single mechanical seal. Inlet and outlet are 2 in. Vector Drive Motor. Mfg: Baldor Electric Co. Motor Specifications: 1-1/2 hp, 1,750 rpm, 230/460 Volt, 4.2/2.1 Amps, 60 Hz, 3 phase, 145TC Frame. Gear reducer specifications: 3.30 hp (input), 1,750 rpm (in), 648 (out), 2.7 Gear Ratio, Torque Capacity 322 in/lb. Overall Dimensions: 12 in. W x 55-1/2 in. L x 12 in. H.
Moyno Progressing Cavity Pump. Model: 1FF6. S/N: AM10472. Type: SSQ/AAA. Displacement per 100 rpm: 5.00 gallons. Single mechanical seal. 304 stainless steel with 316 stainless steel internal components. Inlets: (1) 2 in. dia. threaded fitting. Outlets: (1) 2 in. dia. threaded fittings. Dodge APG Motor Drive, 5.0 ratio, 910 in. lbs. torque. FF series pumps are designed for use where the material being pumped is relatively free flowing. The suction and discharge ports are equipped with easy cleaning gasketed clamp-style connections. Overall dimensions: 79 in. L x 17 in. W x 24-1/2 in. H.
Moyno Progressive Cavity Pump. Model: 1L8-CDB. Nominal capacity @ 800 rpm using 5 hp motor: 80 gpm. Char Lynn Hydraulic Drive. Shaft dimensions: 2 in. dia x 17 in. L. Inlets/outlets: (2) 3 in. Q-line fittings. Overall dimensions: 79 in. L x 24 in. W x 34 in. H. (ACN56a)
Moyno 6M4 Progressing Cavity Pump. Type: SDR. Frame: 6M4. S/N: LS53144. Maximum rpm: 1050. Capacity: 11.33 gpm @ 87 psi. Motor, 10 hp, 1735 rpm, 230/460 V, 27/13.5 amps, 3 phase. Pulley Ratio: 3 to 1. Current final rpm: 578. The Moyno progressing cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator. Inlet: (1) 3 in. dia. port with a 7-1/2 in. dia. and (4) 1/2 in. dia. thru-holes at a center-to-center distance of 6 in. Outlets: (1) 2-1/2 in. threaded fitting (female). Overall dimensions: 75 in. L x 41 in. W x 27 in. H.
Moyno Progressing Cavity Pump. Model: 2L10H SSQ. S/N: AM21100. With 304 stainless steel suction housing, 316 stainless steel internal components, and nitrile rubber stator. Capacity: 125-150 gpm @ 80 psig and 0 psig, respectively. U.S. Motor, 10 hp, 1755 rpm, 230/460 V, 27.2/13.6 FLA (33.4/16.7 SFA), 60 Hz, 3 phase. U.S. Motors Varidrive Module, 450/3600 min/max rpm, 335 in-lbs max output torque. The Moyno progressing cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator. Inlets: (1) 6 in. dia. port with an 11 in. dia. flange and (8) 3/4 in. dia. attachment holes. Outlets: (1) 3 in. dia. threaded fitting with hex nut. Overall dimensions: 9 ft. 7 in. L x 21 in. W x 35-1/2 in. H.
Moyno 6M4 Progressing Cavity Pump. Model: 6M4. S/N: AS53027. Stainless steel pump body. Maximum rpm: 1050. Capacity: 8.5 gpm at 87 psi. Final rpm: 434. Enclosed motor, 10 hp, 1735 rpm, 230/460 V, 27/13.5 amps, 3 phase. Pulley ratio: 4 to 1. The Moyno progressive cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator (nitrile). Typical applications include high-pressure water, pastes & gels, food, wastes & by-products, chemical feed & sampling, and coolants & lubricants. Inlets: (1) 3 in. diameter, flange: 7 ½ in. diameter with (4) thru-holes at a center-to-center distance of 6 in. Outlets: (1) 2 in. NPT (male). Overall dimensions: 6 ft. L x 3 ft. in. W x 2 ft. 3 in. H. (ACN104)
Moyno Progressive Cavity Pump. Model: 9FQ4 SSQ. S/N: AS38047. 9-stage. Baldor Industrial Motor, 5 hp, 1725 rpm, 208-230/460 V, 15-13.2/6.6 amps, 60 Hz, 3-phase. Sew Eurodrive Gear Drive, 35.3 ratio, 49 rpm (final). Features a single external helix with a round cross-section within a double internal helix bonded to an alloy steel tube. The continuous seal between the rotor and the stator keeps the fluid moving steadily at fixed flow rates. Can be run in either direction and in any position. 304 stainless steel suction housing, 316 stainless steel internal components, and a nitrile rubber stator. Inlets: (1) 4 in. dia. threaded fitting. Outlets: (1) 3/4 in. dia. coupling. Overall dimensions: 13 ft. L x 32 in. W x 67 in. H.
Moyno Progressing Cavity Pump with motor on frame. Inlet 2 in. Outlet 1 in. Drive: Reliance, Name Dodge AGP, Input Hp: 11.3, Output rpm: 280, size: 182 DM3A, Ratio 6.2, Output torque: 2441. Motor: Reliance, 3 hp, 1,755 rpm, 230/460 volt, 7.6/3.8 amps, 60 Hz, 3 phase.
Moyno Progressing Cavity Pump
Mfg: Moyno
Model:1FG3
Stock No. SPPP700.1a
Serial: A-3112-1
Moyno Progressing Cavity Pump. Model: 1FG3. S/N: A-3112-1. Frame: SSQ. Form DD. 304 stainless steel with 316 stainless steel internal components. FF series pumps are designed for use where the material being pumped is relatively free flowing. The suction and discharge ports are equipped with easy cleaning threaded connections. Inlets/outlets: (2) 1-1/2 in. dia. threaded fittings. Overall dimensions: 56 in. L x 15 in. W x 28-1/2 in. H.
Moyno 6M4 Progressing Cavity Pump. Type: SDR. Model: 6M4. S/N: AS53673. Maximum rpm: 1050. Capacity: 11.33 gpm at 87 psi. Displacement per Revolution: 0.006 gal. Motor: 10 hp, 1735 rpm, 230/460 V, 27/13.5 amps, 3 phase. Pulley ratio: 3 to 1. Current final rpm: 578. The Moyno progressing cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator. Typical applications include high-pressure water, pastes & gels, food, wastes & by-products, chemical feed & sampling, and coolants & lubricants. Inlet: (1) 3 in. diameter, flange: 7 ½ in. diameter with (4) holes, center to center: 6 in. Outlet: 2 ½ in. threaded female. Overall dimensions: 6 ft. 3 in. L x 3 ft. 6 in. W x 2 ft. 2 in. H. (ACN74).
Moyno Progressing Cavity Pump. Model: 2FG3. S/N: AS-68193. Capacity: 3.5 gpm @ 130 psi. Frame: SSQ. Form: FF. Dayton Motor Drive, 1-1/2 hp, 1740 rpm, 669 rpm (final), 230/460 V, 4.8/2.4 amps, 60 Hz, 3 phase. 304 stainless steel with 316 stainless steel internal components. FF series pumps are designed for use where the material being pumped is relatively free flowing. The suction and discharge ports are equipped with easy cleaning threaded connections. Inlets/outlets: (2) 1-1/2 in. dia. threaded fittings. Overall dimensions: 37 in. L x 13 in. W x 29 in. H.
Moyno FG-Series 2-stage Sanitary Pump. Model: 2FG8. Type SSG-AAA. Stainless Steel Construction. Capacity: 7.2 gpm. Displacement per Revolution: 0.07 gal. 304 Stainless Steel suction housing. 316 Stainless Steel internal parts include drive shaft, pins, connecting rod, rotor, and other minor metallic parts in contact with product. 416 Stainless Steel stator. Extra large bearings and bearing housing to handle increased loads. Designed for highly viscous fluids @ low flow rates with high pressure. Reliance Electric Motor, 7.5 hp, 1760 rpm, 230-460 V, 21-10.5 amps, 60 Hz, 3 phase. Reliance Master XL Gearmotor, 17.1 ratio, 102.9 output rpm. Unit is equipped with a 5 in. dia. x 40 in. L shaft and a 4 in. dia. x 40 in. L screw auger. Overall dimensions: 8 ft. 6 in. L x 2 ft. 2 in. W x 2 ft. 7 in. H. (ACN247a).
Moyno Progressing Cavity Pump. Model: 33104. Capacity: ½ gpm. Materials of Construction: 316 stainless steel housing and rotor, NBR (nitrile) stator. Mechanical seal: carbon ceramic. Baldor Industrial Motor, 3/4 hp, 1750 rpm, 90A/100/50 F V, 7.8/.6/1.2 amps, direct current. Drive, ratio: 4, 437 rpm out (final). Inlets/outlets: (2) 1 in. dia. FNPT fittings. Overall dimensions: 3 ft. L x 1 ft. W x 1 ft. 3 in. H.(ACN13).
Moyno Progressing Cavity Pump. Model: 3M6 SSQ. S/N: AS31867. Capacity at 600 rpm: 21 gpm @ 150 psi. Minimum horsepower required: 7-1/2 hp. Moyno pumps use a single rotating element to generate positive displacement progressing cavities which deliver predictable, uniform, continuous flow. Moyno pumps offer accurate, repeatable flows. Inlets: (1) 4 in. dia. suction port with a 125 lb ANSI flange. Outlets: (1) 2 in. dia. FNPT fitting. Overall dimensions: 94 in. L x 22-1/2 in. W x 18 in. H.
Moyno Progressing Cavity Pump. Model: B1C CDQ 2AAA. S/N: GSA250462. Capacity: 7.2 gpm @ 45 psi. Moyno pumps offer a single rotating element that delivers uniform, continuous flow. Output is smooth and uniform at any speed; delivery is steady even at low flow conditions. Accurate and repeatable. Baldor Industrial Motor, 0.75 Hp, 1750 rpm, 90 V, 7 Amps. Nord Gear, Ratio: 3.60, 486 final rpm. Inlets: (1) 2 in. dia. ANSI 125 lb flange. Outlets: (1) 1 in. dia. ANSI 125 lb flange. Overall dimension 49 in. L x 10 in. W x 13 in. H.
Moyno Stainless Steel Cavity Pump. With 3 hp motor.
Moyno Progressive Cavity Pump SOLD
Mfg: Moyno
Model:SSQ
Stock No. MP-149
Serial: AS-4124
Moyno progressive cavity pump, screw type, Model SSQ, S/N AS-4124.
SOLD
Moyno Progressive Cavity Pump SOLD
Mfg: Moyno
Model:CDQ
Stock No. MP-151
Serial: AS36382
Moyno progressive cavity pump, screw type, Model CDQ, S/N AS36382, carbon steel, no motor.
SOLD
Moyno Progressive Cavity Pump SOLD
Mfg: Moyno
Model:SSR
Stock No. 28.MFM1265.4
Serial: AS61074
Moyno SSR Progressive Cavity Pump, serial AS61074, 1.5in infeed-discharge, 12in hop infeed, Reeves 0.25hp vari speed drive, 346rpm 200V, 36in L x 19in W x 38in H.
SOLD
SOLD Moyno Slurry-Positive Displacement Pump SOLD
Mfg: Moyno
Model:33104
Stock No. 17a.BR-150.4
Serial:
Moyno slurry-positive displacement pump, model 33104, 10.00 gpm, progressive cavity, series 300, with base, 3/4 horsepower, 1750 rpm, DC motor and controller.
SOLD
SOLD Mono Pump with Screw Auger and Hopper SOLD
Mfg: Moyno
Model:ST421R5
Stock No. SAPM024.a
Serial: 30/76/62542
Mono Pump with Screw Auger and Hopper. Type/Model ST421R5. S/N: 30/76/62542. Screw auger dimensions: 3 in. dia. x 24 in. L. Screw auger housing diameter: 3-1/2 in. Pump is equipped with a 27 in. L x 22 in. W infeed hopper. U.S. Motor, 1.5 hp, 1,730 rpm, 230/460 V, 5.0/2.5. FLA, 60 Hz, 3 phase. U.S. Vari-drive Motor Drive, 428 rpm (final). Inlets: (1) 11 in. L x 6 in. W inlet. Outlets: (1) 1-1/2 in. threaded fitting. Overall dimensions: 67 in. L x 15 in. W x 35 in. H.
SOLD
Moyno Progressive Cavitation Pump. Model: 2L10H SSQ. S/N: n/a. With 304 stainless steel suction housing, 316 stainless steel internal components, and nitrile rubber stator. Inlets/outlets: (1) 6 in. dia. inlet with an 11 in. dia. flange and (8) attachment holes and (1) 3 in. dia. outlet. U.S. Motor- 10 hp, 1,755 rpm, 208-230/460 V, 28.9-27.2/13.6 F.L. amps (33.4/16.7 S.F. amps), 60 Hz, 3 phase. U.S. Motors Varidrive Module, 10 hp max input at 1,750 rpm, 450/3,600 min/max rpm, 335 in-lbs max output torque. U.S. Motor Drive, 9-ratio, 1,750 rpm (input), 9,460 in-lbs torque (output). Overall dimensions: 115 in. L x 19-/12 in. W x 33 in. H.
SOLD
Moyno Progressing Cavity Pump. Model: 2L4 SSQ AAA. S/N: AM16862-1. Displacement per revolution: 5.20 gal/100 rev. Capacity: 8.02 gpm.Baldor Industrial Motor, 3 hp, 1,760 rpm, 230/460 V, 5.6/2.8 amps, 60 Hz, 3 phase. Dodge AGP Motor Drive, 11.4 ratio, 154.38 rpm (final), 1394 in. lbs. torque. Inlets: (1) 2-1/2 in. dia. inlet with a 7 in. dia. flange and (4) 5/8 in. dia. attachment holes at a center-to-center distance of 4 in. Outlets: (1) 2 in. dia. NPT (female). Overall dimensions: 84 in. L x 19 in. W x 16 in. H.
SOLD
Moyno Pump. Model: 1FF-10H. S/N: AS-67704. Type: SSQ-X. The moyno pump design allows easy handling of highly viscous viscous materials. The hopper permits full flow into the suction housing, and an auger carries the product to the rotor-stator pumping elements. Motor, 15 hp, 1200 rpm, 230/460 V, 42/21 amps, 60 Hz, 3 phase. Pulley ratio: 2 to 1, final rpm: 600. MS-127 Variable Seave motor drive, requirements: 25 hp at 1750 rpm, 15 hp at 1160 rpm, with a 4-1/2 in. wide flat face pulley, maximum safe speed: 400 rpm. Stainless steel suction square hopper: 36 in. L x 24 in. W x 22-1/2 in. H. Screw: 5-1/2 in. diameter x 67 in. L. Product outlet: 4 in. threaded (male). Overall dimensions: 98 in. L x 45 in. W x 34 in. H. SOLD
SOLD
Moyno Progressing Cavity Pump. Model: 1L10H SSQ. S/N: 012449. With 304 stainless steel suction housing, 316 stainless steel internal components, and a nitrile rubber stator. Capacity: 115 gpm @ 40 psi. U.S. Motor Unimount 125, 7.5 hp, 1,745 rpm, 230/460 V, 20.6/10.3 amps (25.0/12.5 S.F. amps), 60 Hz, 3-phase. U.S. Motors Varidrive Module, 10 hp max input at 1,750 rpm, 450/3,600 min/max rpm, 335 in-lbs max output torque. U.S. Motor Drive, no nameplate information. Inlets/outlets: (1) 6 in. dia. inlet with 11 in. dia. flange, (8) attachment holes; (1) 6-1/4 in. dia. outlet with 11 in. dia. flange and (8) attachment holes. L. amps (25.0/12.5 S.F. amps), 60 Hz, 3-phase. U.S. Motors Varidrive Module, 10 hp max input at 1,750 rpm, 450/3,600 min/max rpm, 335 in-lbs max output torque. U.S. Motor Drive, no nameplate information. Overall dimensions: 111 in. L x 21 in. W x 40 in. H.
Moyno Progressive Cavity Pump. Model: 1L10H. S/N: AS49396. Type: SSQ. Form: RR. Pump features 304 stainless steel suction housing with 316 stainless steel internal components housed in a nitrile rubber stator. Hydraulic Drive with 3/4 in. dia. hose fittings. Shaft dimensions: 3 in. dia. x 36 in. L. Inlets/outlets: (2) 3 in. S-line fittings. Overall dimensions: 89 in. L x 28 in. W x 36 in. H.
SOLD
Moyno Progressive Cavity Pump. Model: 1L10H. Type: SSQ. S/N: A-1134-1. Shaft dimensions: 3 in. dia. x 36 in. L. Inlets/outlets: (2) 3 in. dia. S-line fittings. APG Motor Drive, 6.2 ratio. Overall dimensions: 88 in. L x 21 in. W x 22 in. H.
SOLD
Assorted Moyno Pump Parts including (5) Starters - (2) stainless steel, (5) stainless steel rotors for Models 1L1DH, 1L1D's, Etc. Part No.'s 400-13 BDBA, stainless steel housing, cover plates.
SOLD
SOLD Moyno Progressing Cavity Pump
Mfg: Moyno
Model:
Stock No. CCFP149.
Serial:
Moyno Progressing Cavity Pump. Model: 2L8. S/N: A-8034-2. Type: SSR. Capacity: approx. 40 gpm. The Moyno progressing cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator. Robbins & Myers Motor. Mounted on steel base. Inlets/outlets: (1) 3 in. dia. ports. Overall dimensions: 74 in. L x 46 in. W x 24 in. H.
SOLD
Moyno Progressing Cavity Pump. Model: 1FF-10H. S/N: AS-67704. Type: SSQ-X. Stainless steel suction square hopper: 36 in. L x 24 in. W x 22-1/2 in. H. Screw: 5-1/2 in. diameter x 67 in. L. The moyno pump design allows easy handling of highly viscous viscous materials. The hopper permits full flow into the suction housing, and an auger carries the product to the rotor-stator pumping elements. Motor, 15 hp, 1200 rpm, 230/460 V, 42/21 amps, 60 Hz, 3 phase. Pulley ratio: 2 to 1, final rpm: 600. MS-127 Variable Seave Motor Drive, requirements: 25 hp at 1750 rpm, 15 hp at 1160 rpm, with a 4-1/2 in. wide flat face pulley, maximum safe speed: 400 rpm. Hitachi Variable Frequency Inverter, Model: L300P-110LFU2, Kw/(Hp): 11/(15), Input: 50/60 Hz, 200-240 V, 3 phase. Output 0.1-400 Hz. Product outlet: 4 in. ACME fitting. Overall dimensions: 98 in. L x 45 in. W x 94 in. H.
Moyno SSQ Progressive Cavity Pump, 2in thread suction-discharge, 0.25hp vari speed drive, 50in L x 25in W x 55in H.
SOLD Moyno Progressive Cavitation Pump SOLD
Mfg: Moyno
Model:1L10 SSQ
Stock No. CCFP147.
Serial: AS49490
Moyno Progressive Cavitation Pump. Model: 1L10SSQ. S/N: AS43490. With 304 stainless steel suction housing, 316 stainless steel internal components, and nitrile rubber stator. Minimum rpm- 25.4; maximum rpm- 216. Inlets/outlets: (1) 6 in. dia. inlet with 11 in. dia. flange and (8) attachment holes; (1) 6-1/4 in. dia. outlet with an 11 in. dia. flange and (8) attachment holes. Frame- 1L10. U.S. Motor- 7.5 hp, 1800 rpm, 220/440 V, 25.6/12.8 amps, 60 cycles, 3 phase. U.S. Motors Varidrive Module, 16.9-ratio. Overall dimensions: 125 in. L x 20 in. W x 40 in. H.
Moyno Progressing Cavity Pump. Model: 1L10H. Type: SSQ. Capacity: 80-90 gpm @ 40 psi. Reliance Electric, 5 hp, 1165 rpm, 220-440 V, 15/7.5 amps, 60 Hz. 3.45: 1 pulley ratio. Final rpm: 337. Inlets/outlets: 3 in. Overall dimensions: 42 in. L x 66 in. W x 26 in. H.
Moyno Progressing Cavity Pump. Model: 1L10H. S/N: AS3528. Type: SSX. Capacity: up to 100 gpm @ 45 psi. The Moyno progressing cavity pump is a single screw rotary pump. The pumping action is created by the single helical rotor rolling eccentrically in the double threaded helix of the stator. Reliance Electric Motor, 7-1/2 hp. Reeves Varidrive Module, 6.2: 1 ratio, 420 max rpm, 84 min rpm. Inlets/outlets: (2) 3 in. dia. ports. Overall dimensions: 96 in. L x 25 in. W x 33 in. H.
Moyno Progressing Cavity Pump. Model: 1L10H CDQ. Nominal capacity @ 750 rpm using 7.5 hp motor: 136 gpm @ 45 psi. Shaft diameter: 3 in. Inlets/outlets: (2) 6 in. dia. with 11 in. dia. flanges and (8) 3/4 in. dia. attachment holes. Overall dimensions: 56 in. L x 11-1/2 in. W x 33 in. H.
