Pureflo Positive Displacement Rotary Pump. Model: 25500-A1. S/N: 2041. Inlets/outlets: (2) 1-1/2 in. dia. S-line fittings. Overall dimensions: 1 ft. 1-1/2 in. L x 8 in. W x 7-1/4 in. H.
Gorman-Rupp Rotary Pump. Model: GHS2JL10-B. S/N: 1143733N. Capacity: 12.4 gpm. Displacement per revolution: 0.07gal. Maximum viscosity: 2,000,000 SSU (431,000 CST). Maximum pressure: 400 psi (28 bar). Rotor & idler, internal relief valve, shaft and wetted metal parts are of 316 stainless steel construction. .Baldor Industrial Motor, 5 hp, 208/230/460 V, 15-13.2/6.6 amps, 1,725 rpm, 60 Hz, 3 phase. Motor drive, 9.80 ratio, 176 rpm (final). The GHS Series of iron, high capacity pumps is designed for continuous duty service for applications in the operating ranges noted. The units are ideal for bulk handling both thin and viscous liquids. For temperature control, back head and housing jackets are standard. This heavy duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing, for reduced deflection and wear. Inlets/outlets: (2) 2 in. dia. "S" line fittings. Overall dimensions: 4 ft. L x 21-½ in. W x 12 in. H.(ACN56).
G&H Positive Displacement Pump. Model: GHP-2020A. S/N: 84-6-005. 3-A sanitary rated. Displacement: 16.9 gal/100 rpm. This range of pumps have been designed for pumping an array of viscosities from water to semi-solid applications. They are suited for both homogeneous liquids and liquids with particles/solids in suspension. Inlets/outlets: (2) 2 in. dia. threaded fittings. Overall dimensions: 17-1/2 in. L x 9 in. W x 11 in. H.
GH Products Corporation Rotary Positive Displacement New Pump. Model GHP-1020, S/N 88-6-2437. Same as Alfa Laval Model SRU3, narrow SLS. Baldor Industrial Motor, 3 Phase. Cat No. 35K303W206, frame 560, Ser. F. 190, 1-½ hp, 208-230/460 volt, 5.3-5/2.5 amps, 1,725 rpm, 60 Hz, 3 phase, Class F. Gear Box: Nord Gear Box Corp. Size SK 12-MO56K4. S/N 22715PP, Ratio 6.53, .5 hp at 1,750 rpm.
G & H-Ibex Rotary Pump. Model: GHP-601RV. S/N: 81-5-557. A-3 sanitary rated. Impeller diameter: 2 in. O-ring seals. Inlets/outlets: (2) 1 in. dia. threaded fittings. Overall dimensions: 13 in. L x 6 in. W x 7 in. H.
WCB Ice Cream Co. Ripple Pump with 1 in. inlets, skid mounted. 5 gallon balance tank, Pump information is n/a with variable speed drive and 3/4 hp motor. 230/460 V. Overall dimensions 50 in. L x 21 in. W x 33 in. H.
1997 G&H Positive Displacement Rotary Pump. Model: GHPD-422. S/N: 97-1-7272A. Nominal capacity: 33gpm @145 psi. Sterling Electric Motor, 1 hp, 1730 rpm, 230/460 V, 3.2/1.6 amps, 60 Hz, 3 phase. Sterling Electric Drive, ratio: 4.0, rpm in/out: 1730/434 (final). Inlets/outlets: (2) 1-1/2 in. dia. S-line fittings. Overall dimensions: 2 ft. 11 in. L x 1 ft. 4 in. W x 1 ft. 3 in. H.(ACN53).
Lobeflo Positive Displacement Pump. Model: AP75/CS8. S/N: 35482/08B. Discharge pressure: 101 psi. Pressure relief cover option. Inlets/outlets: (2) 1 in. dia. S-line fittings. Overall dimensions: 1 ft. 3 in. L x 8 in. W x 7-1/2 in. H.
1994 G & H Positive Displacement Pump. Model: 622P. S/N: 94-9-4665A. Nominal capacity: 135 gpm. Nominal displacement: 14.6 gal/100 rev. Maximum speed: 1000 rpm. Double mechanical seals. Baldor Industrial Motor, 5 hp, 1725 rpm, 208-230/460 V, 15-13.2/6.6 amps, 60 Hz, 3 phase. Reliance Variable Speed Drive, ratio: 7.6, max speed: 550 rpm, min speed: 55 rpm (final). Inlets/outlets: (2) 2 in. dia. Q-line fittings. Stainless steel rotors and vertical ports. The GHPD rotary lob positive displacement pump was designed to meet specific processing needs in the dairy, food, chemical, pharmaceutical, and biotech industries. When operating at optimum speeds, this pump provides gentle handling of both viscous and water-like products. Overall dimensions: 4 ft. 8 in. L x 1 ft. 8 in. W x 3 ft. 2 in. H.
Chemcom Rotary Pumps. Models: 1170-90-T3D and 1120-90-T3D. S/N's: 22843 and 21028. Capacity: 250 gpm @ 35 psig (sn: 22843) and 8 gpm @ 100 psig (sn: 21028). Baldor Industrial Motor, 1 hp, 1725 rpm, 230/460 V, 3.4/1.7 amps, 60 Hz. Reeves Variable Speed Module, Max. 3320 and Min. 644. Inlets: (1) 1-1/2 in. dia. port, (1) 1/2 in. dia. port. Outlets: 1-1/2 in. NPT, (1) 1/2 in. port. Overall dimensions: 49 in. L x 24 in. W x 53-1/2 in. H.
ITT Jabsco Pureflo Positive Displacement Pump. Model: 25650-0340. S/N: 0684. Inlets/outlets: (2) 2 in. dia. S-Line fittings. Overall dimensions: 1 ft. 6 in. L x 9 in. W x 9 in. H.
Oberdorfer Positive Rotary Pump. S/N: 4156C. Baldor Industrial Motor, 2 to 1 hp, 1725/850 rpm, 460 V, 2.8/2.6 amps, 60 Hz, 3 phase. Inlets: (1) 1 in. dia. MPT. Outlets: (1) 1 in. dia. S-line. Overall dimensions: 25-1/2 in. L x 10 in. W x 10 in. H.
G & H Sanitary Centrifugal Pump. Model 76-11-12692, S/N GLH2B JCWC, 2 in. inlet, 2 in. outlet, stainless steel clamp head. Baldor Electric Motor model TA04566, S/N 35E362872, 2 hp, 1,725 rpm, 230-460 volt, 6.2-3.1 amps, 3 phase. Overall Dimensions 16 in. W x 37 in. L x 35 in. H.
Albin Positive Displacement Pump. Stainless Steel 1-½ in.
G & H Positive Displacement Pump
Mfg: G & H
Model:GHP-2020
Stock No. HDPH253A.16a
Serial: 87-7-2051
G & H Positive Displacement Pump. Model: GHP-2020. S/N: 87-7-2051. Maximum flow rate: 78 gpm. Maximum speed: 750 rpm. Rotary lob pump have been designed for use on wide ranging applications within the Brewing, Dairy, Food, Pharmaceutical, and Chemical industries. The smooth, slow action is ideal for products such as creams, gels, emulsions, aerated mixtures, delicate cells and organic solids in suspension. Inlets/outlets: 2 in. dia. S-line fitting. Overall dimensions: 18 in. L x 9-1/2 in. W x 11-1/2 in. H.
G&H Positive Displacement Pump. Model: SRU-3NLS. S/N: 02-3-9872A. Displacement: 10.15 gal/100 rev. Maximum size of spherical solids handled: 0.43 in. Baldor Washdown Duty Industrial Motor, 2 hp, 1725 rpm, 230/460 V, 6.2/3.1 amps, 60 Hz, 3 phase. Sumitomo Gear Drive: 5.91 ratio, 296 rpm (final). The SRU range of rotary lob pumps has been designed for use on wide ranging applications within the Brewing, Dairy, Food, Pharmaceutical and Chemical Industries. It can handle low to high viscosity media, is suitable for CIP cleaning, and conforms to 3-A sanitary standards. Inlets/outlets: (2) 1-1/2 in. dia. S-line fittings. Overall dimensions: 40 in. L x 11 in. W x 14-1/2 in. H.
Foster Vane Pump. Model: R2-5. S/N: 72044. Capacity: 100 gpm in 150,000 SSU viscosity fluid. Pump key features include pump pressure limiting valve (PLV) and limited interchangeability of sizes for internal bypass or return to source of product. This pump is conservatively sized for high-viscosity service. Steel base with (4) casters for easy positioning. Reliance Electric Motor, 5 hp, 1710 rpm, 230/460 V, 16.4/8.20 amps, 60 Hz, 3 phase. Reeves Varispeed Module, Size: 332, ratio: 20.9, maximum: 200 rpm, minimum: 20 rpm. Pump inlet/outlet: 6-1/2 in. diameter, flange: 11 in. diameter with (8) thru-holes at a center to center distance of 10 in. Overall dimensions: 58 in. L x 28 in. W x 53 in. H.
Foster Rotary Vane Pump. Model: RIF3-3. S/N: 73248. Capacity: 20 gpm @ 150,000 SSU. Reliance Electric motor: 3 hp, 1740 rpm, 230/460 V, 9.6/4.8 amps, 60 Hz, 3 ph. Reeves Varidrive Module, maximum ratio: 20.9, final rpm (max. ratio): 83.25 rpm. Eccentric centers for medium to high viscosity liquids. Consists of four sliding vanes with through-vane slots, large ports and pumping chamber, and open flow path for least resistance to highly viscous, hard-to-pump liquids. Steel base. Pump inlet/outlet: 3 in. 'S' line. Overall dimensions: 61 in. L x 30 in. W x 30 in. H.
Rotary Positive Displacement Pump. Model: 1V360. S/N: 0293. Dayton Industrial Electric Motor, 3/4 hp, 1725 rpm, 115-230 V, 12.4/6.2, 60 Hz, 3 phase. Inlets/outlets: (2) 1 in. NPT female fittings. Overall dimensions: 20-3/4 in. L x 6 in. W x 9 in. H.
Rotary Positive Displacement Pump. Model: 1V360. S/N: 0293. Dayton Industrial Electric Motor, 3/4 hp, 1725 rpm, 115-230 V, 12.4/6.2, 60 Hz, 3 phase. Inlets/outlets: (2) 1 in. NPT female fittings. Overall dimensions: 20-3/4 in. L x 6 in. W x 9 in. H.
Blackmer Dover Sliding Vane Liquefied Gas Pump LGL Series
Mfg: Blackmer Dover
Model:LGL 1-1/2
Stock No. HDCF211.6
Serial: 217008l
Blackmer Dover Sliding Vane Liquefied Gas Pump. Model: LGL 1-1/2. S/N: 217008l. ID No: 41Q-1. Baldor Industrial Motor, 2 hp, Maximum flow rate: 37 gpm. Least displacement/revolution: .014gal @ 1725 rpm. 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Inlets: (1) 1-1/2 in. dia. FNPT. Outlets: (1) 1 in. dia. FNPT, (1) 1/2 in. dia. press. relieve valve. Designed for medium capacity requirements such as auto propane dispensing and multiple scale bottle filling applications, the LGL series of pumps have built in relief valves to protect downstream piping systems by using external bypass valves to set discharge pressure. The LGL also features a redesigned, cavitation suppression liner. Overall dimensions: 2 ft. L x 1 ft. 3-1/2 in. W x 1 ft. 4 in. H. (ACN11-87). FAD
Eco Gearchem G6 Rotary Positive Displacement Pump. Model: G6-ACQ-TTV. Century Motor, 1/4 hp, 1725 rpm, 115/230 V, 3.6/1.8 amps, 60 Hz, single phase. Boston Gear Right Angle Drive. Inlets/outlets: (2) 1 in. dia. FNPT fittings. Overall dimensions: 3 ft. 8 in. L x 1 ft. 9 in. W x 3 ft. 9 in. H.
Albin Positive Displacement Pump. Model: P52A31C3A0T. S/N: 135219. MAWP: 116 psi @ 230 °F Max. Reliance Electric Motor, 10 hp, 1160 rpm, 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Motor pulley diameter: 5-3/4 in. Gear pulley diameter: 18-3/4 in. 355 rpm (final). Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 3 ft. 9 in. L x 2 ft. 2 in. W x 2 ft. H.
Albin Positive Displacement Pump. Model: P52N31BL9A0T. S/N: 139306. MAWP: 166 psi @ 230 °F Max. Inlets/outlets: (2) 3 in. dia. S-line fittings. Overall dimensions: 4 ft. 6 in. L x 1 ft. 3 in. W x 1 ft. 6 in. H.
Ibex (Alfa Laval) Rotary Pump. Model: MOG/1020A. S/N: 33745. Nominal capacity: 77.55 gpm, current capacity: 19.47 gpm. Displacement: 5.5 gal./100 revolutions. Alpak Electric Motor, 1.5 hp,1410 rpm, 220-240/380-415 V, 4.5/2.6 amps, 50 Hz, 3 phase. Operman Drive, ratio: 3.98, rpm in/out: 1410/354 (final). Pump comes with a manual relieve valve located on the pump cover. Inlets/outlets: (2) 2 in. dia. S-line fittings. Overall dimensions: 3 ft. 3 in. L x 11 in. W x 1 ft. 2 in. H.
SSP Pumps Ltd. Positive Displacement Pump. Model: 100ND. S/N: 4872/FS. Alpak Electric Motor, 3/4 hp,1400 rpm, 220-240/380-415 V, 2.6/1.5 amps, 50 Hz, 3 phase. Motor gear Drive, ratio: 2.87, rpm in/out: 1400/488 (final). Pump comes with pressure relieve valve and a start/stop control box. Inlets/outlets: (2) 1-1/2 in. dia. ACME fittings. Overall dimensions: 2 ft. 9 in. L x 1 ft. 1 in. W x 3 ft. H.
Stainless Steel Pumps LTD Positive Pump. Model: 100ND. S/N: 100ND/1908. Alpak Electric Motor, 3/4 hp,1400 rpm, 220-240/380-415 V, 2.6/1.5 amps, 50 Hz, 3 phase. Motogear Drive, ratio: 2.87, rpm in/out: 1400/488 (final). Pump comes with a start/stop control box. Inlets/outlets: (2) 1 in. dia. ACME fittings. Overall dimensions: 2 ft. 6 in. L x 1 ft. 1 in. W x 3 ft. H.
Jabsco Positive Displacement Lobe Gear Pump. Model: 24950-1870. S/N: 7719. SEW Eurodrive, 1/3 hp, 3300 rpm, 230/460 V, 2.8/1.41, 60 Hz, 3 phase. Eurodrive, Rpm out: 216 (final). Inlets/outlets: (2) 1 in. dia. S-line fittings. Overall dimensions: 2 ft. 5 in. L x 1 ft. 4 in. W x 2 ft. 10 in. H.
SSP Pumps Ltd. Positive Pump. Model: 100ND. S/N: 4869/FS. NECO Electric Motor, 1/2 hp, 200 rpm, 220/240 V, 3.4 amps, 50 Hz, 1 phase. Pump comes with a manual start/stop control and Float switch control box, one or the other option can be selected via a selector switch. Inlets/outlets: (2) 1-1/2 in. dia. ACME fittings. Overall dimensions: 2 ft. 6 in. L x 1 ft. 1 in. W x 3 ft. H.
SOLD ITT Jabsco Positive Pump Stainless Steel SOLD
Mfg: ITT Jabsco
Model:25700-0500
Stock No. 29a-R164-A
Serial:
ITT Jabsco positive displacement pump stainless steel Model 25700-0500. 3 in. bevel seat connections. Bottom shaft drive.
SOLD AG and H Positive Pump Stainless Steel SOLD
Mfg: AG and H
Model:2130
Stock No. 23-R712-A
Serial:
AG and H (ibex) positive displacement pump stainless steel Model 2130. 3 in. bevel seat connections. Top shaft drive.
SOLD Sta-Rite Postive Pump Stainless Steel SOLD
Mfg: Sta-Rite
Model:rs-150
Stock No. 29a-R193-A
Serial:
Sta-Rite (iverson) positive displacement pump stainless steel Model rs-150. 4 in. clamp connections.
SOLD 1997 G&H Positive Displacement Pump SOLD
Mfg: G & H
Model:GHPD-522
Stock No. HDPH492.13a
Serial: 97-9-7691A
1997 G & H Positive Displacement Pump. Model: GHPD-522, S/N: 97-9-7691A. Capacity: 7 gal/100 revolutions "nominal", 30 gpm. Single mechanical, silicon carbide seal option. Sterling Electric Motor, 3 hp, 1715 rpm, 208-230/460 V, 8.8-8.0/4.0 amps, 60 Hz, 3 phase. Sterling Electric Motor Drive, 4.0 ratio, 440 rpm (final). Inlets/outlets: (2) 1-1/2 in. dia. female ferrule fittings. Overall dimensions: 47 in. L x 12 in. W x 17 in. H. (ACN71).
SOLD Hi-Line Stainless Steel Rotary Lobe Pump SOLD
Mfg: Hi-Line
Model:HI540-1890
Stock No. RCCB204.15
Serial: 32081
Hi-Line Stainless Steel Rotary Lobe Pump. Skid mounted. Model HI540-1890. S/N 32081. With 3 hp motor, 3 in. dia. port.
SOLD Perfco Positive Displacement Pump SOLD
Mfg: Perfco
Model:25650-0340
Stock No. DFPC386.4a
Serial: 0692
Perfco Positive Displacement Pump. Model: 25650-0340. S/N: 0692. Reliance Duty Master AC Motor, 2 hp, 1725 rpm. 208-230 V, 6.4-6.4 amps, 60 Hz, 3 phase. Reeves Variable Speed Module, rear ratio: 6.2 to 1, output speed: 680/68 rpm (max/min). On steel base. Portable (4) wheel set for easy maneuverability. Inlets/outlets: (2) 2 in. dia S-Line fittings. Overall dimensions: 45-1/2 in. L x 19-1/2 in. W x 29-1/2 in. H.
