|
|
|
|
|
Used RVS Ammonia Cooled Juice Chiller. Approximate capacity: 431 tons. [4] stainless steel shell and tube chillers with refrigerant accumulator. Chiller [4] pack: Each chiller has [186] 3/8 inner. diameter x 24 feet length 304 stainless steel tubes housed in a 8-5/8 inches outer diameter shell. External tube surface: 436 square feet Rated shell side: 150 psi @ 200 °F, tube side 100 psi@200 °F. Capacity: shell: ammonia: Flow: 23,450 pounds / hr. Temperature: 26°F in and 26°F out. Tube: orange juice: Flow: 47878 pounds / hr. Temperature: 153°F in and 35°F out. The liquid ammonia feed line to chiller set is 1-1/2 inches diameter Refrigerant accumulator: 30 inches outer diameter x 18 feet 6 inches L. Rated shell side: 150 psi @ 200°F. Horizontal oil pot: 6-5/8 inches x 20 inches Rated 150 psi @ 200°F. Number of passes per unit: 1. This was originally installed with Tropicana as part of their orange juice processing line. Approximate overall dimensions: 26 feet 7in. length x 6 feet 3 inches width x 10 feet 4 inches H.[ACN1000].
|
|
Stock No: fpe_DPPE3603C. |
Mfg: RVS |
Model: |
S/N: fpe_90598 – 90602, 90696
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Tetra Pak Spiraflo HTST Multi-tube Heat Exchanger. Model: MTR 154/19x25c-6-2/2. [9] 7 inches diameter x 20 feet length tubes. Set of multi-tube exchanger modules consist of: heater section I, [2] modules MT 154/19x25c-6[flow rates: 150 gallons per minute/260 gallons per minute] and regen section II, MTR 154/19x25c-6[flow rates: 150 gallons per minute/150 gallons per minute]. The heat exchange assembly comes complete with all product wetted parts constructed of AISI 316 stainless steel, 4 inches butt weld connections on product sides, gasket material in EPDM rubber, and a free standing, base frame. This unit was previously installed with Cargill Juice in their orange juice processing line. Inlets/Outlets: [5] 4 inches S-line ports, [1] 3 inches S-Line port. [19] ¾ inches diameter internal tubes. Overall dimensions: 22 feet 1 inches length x 3 feet 1 ½ inches width x 7 feet 4 inches H.[ACN1640].
|
|
Stock No: fpe_RCJF396.50 |
Mfg: Tetra Pak |
Model: MTR 154/19x25c-6-2/2 |
S/N: fpe_183262
|
|
|
|
|
|
|
|
|
|
|
|
|
Used [8] Precision Heat Exchanger Co. Shell and Tube Heat Exchangers. Approximate surface area [heat exchanger group]: 1,947 square feet Serial Number's: 11799-5, 11799-6, 11799-7, 11799-8, 11799-9, 11799-10, 11799-11, 11799-12. Nat'l Bd's: 5160, 5161, 5162, 5163, 5164, 5165, 5166, 5167. Tube material: 304 stainless steel. Number of passes [through exchanger group]: 4. Number of tubes: 186. Tube dimensions: 1/4 inches diameter x 20 feet L. Heat transfer surface area: approx. 243 square feet Tube volume: 9.5 gal. Shell side MAWP: 150 psi @ 200 °F. Inlets: [1] 4 inches diameter port [product], [1] 4 inches diameter port [media]. Outlets: [1] 4 inches diameter port [product], [2] 4 inches diameter ports [media]. Overall dimensions: 23 feet 10 inches length x 5 feet width x 8 feet 11 inches height.
|
|
Stock No: fpe_DTTC2022. |
Mfg: Precision Heat Exchanger Co. |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used [4] Stainless Steel Shell and Tube Heat Exchangers. [1] 3 inches diameter I-line shell tube with [19] 5/16 inches diameter multi-tubes, each 20 feet long. ~31 square feet [1] 3-1/2 inches diameter I-line shell tube with [19] 5/16 inches diameter multi-tubes, each 20 feet long. ~31 square feet [1] 4-1/2 inches diameter I-line shell tube with [31] 5/16 inches diameter multi-tubes, each 20 feet long. ~51 sq feet [1] 4-1/2 inches diameter I-line shell tube with [24] 5/16 inches diameter multi-tubes, each 20 feet long. ~39.25 sq feet
|
|
Stock No: fpe_OI160. |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
