Wolfking Danmark Vertical/Horizontal Screw Auger Conveyor with Hopper
Mfg: Wolfking Danmark
Model:
Stock No. NOI8014.
Serial: 58460
Wolfking Danmark Vertical/Horizontal Screw Auger Conveyor with Hopper. Model: Vertical. S/N: 58460. Auger: 8-1/2 in. dia. x 73 in. H. Discharge offset: 90°. Lincoln Motor, 15 hp, 1750 rpm, 230/460 V, 10/.20 amps, 60 Hz, 3 phase.Type: Horizontal. S/N: 58458. Maximum capacity: 2.46 cu. ft. Minimum capacity: 0.73 cu. ft. Screw auger dimensions: 10 in. dia. x 72 in L. Screw auger housing diameter: 10-1/4 in. Flender Motor, 5.5 kW, 1728 rpm, 220 V, 3 phases. The vertical screw conveyors are designed for transport of pre-ground material where the space is limited. Exit height: 67-1/2 in. (4) adjustable wheels for easy maneuverability. Inlets: (1) 10 in dia. port, (1) 51 in. L x 19 in. W (hopper infeed). Outlets: (1) 15 in. L x 13-1/2 in. W discharge, (1) 10-1/4 in. dia. discharge. Overall dimensions: 9 ft. 11 in. L x 4 ft. W x 7 ft. 10 in. H.
Stainless Steel Dual Paddle Blender with Screw Auger Discharge
Mfg:
Model:
Stock No. tGHFI01.
Serial:
Stainless Steel Dual Paddle Blender with Screw Auger Discharge. Maximum capacity: 4.27 cu. ft. Minimum capacity: 2.92 cu. ft. Auger screw diameter: 5-1/2 in. dia. Auger screw housing diameter: 5-3/4 in. Auger screw length: 30 in. Baldor Industrial Motor: 5 hp, 1725 rpm, 230/460 V, 13.2/6.8 amps, 60 Hz, 3 phase. Motor Drive: no nameplate information. Inlets: (1) 2 in. dia. FPT. Outlet: (1) 5-3/4 in. dia. (4) Casters for easy positioning. Overall dimensions: 62 in. L x 19 in. W x 34 in. H.
Lyco Destoner Vertical Auger. Model DM16-72. S/N 1.61E+09. Stainless steel. Auger dia.: 14-1/2 in. Vertical auger emerges from 48 in. L x 24 in. W x 27 in. H, irregular shaped tank to a discharge height of 7 ft, 6 in. Discharge dimensions: 16 in. W x 12 in. H. Overall height: 9 ft., 3 in. Floating product is picked up by the auger and elevated to the discharge point, while non floating "heavies" sink to the bottom of the tank for removal and discard. Unit is whole and complete, except for a drive chain guard cover on top of the machine and a discharge chute. It is mounted on casters for portable operation.
Thomas Conveyor Company Vertical Screw Auger Conveyor
Mfg: Thomas Conveyor Company
Model:
Stock No. DPFI515.1a
Serial:
Thomas Conveyor Company Vertical Screw Auger Conveyor. Stainless steel construction. Screw auger diameter: 12 in. Auger housing diameter: 12-1/2 in. Screw auger length: 18 ft. 9 in. Capacity (35lbs/cu.ft. of ice @ 312.5 rpm): 7,650 lbs/min. Auger is equipped with (2) 18 in. L x 1-1/2 in. W product paddles and a 13 in. L x 9 in. W access door. Dodge Motor Drive, 5.60 ratio. Inlets: (1) 10-1/2 in. dia. infeed. Outlets: (1) 17 in. L x 13 ft. W discharge chute. Overall dimensions: 25 ft. L x 31 in. W x 29 in. H.
Crepaco Ingredient Feeder. Model S-420. S/N D4661-S-420. Stainless steel. Capacity: 100-200 gph combined throughput. Connections: 3 in. Holding tank: 18 in. L x 17 in. W x 19 in. H. Screw: 4 in. dia. Motor: 3 hp, 1750 rpm, 220 V, 3 phase. Variable speed hydraulic pump motor. May require optional feed auger for specific flow rates. Overall dimensions: 43 in. L x 24 in. W x 52 in. H.
Crepaco S-420 Stainless Steel Feeder. Serial S-420-C7258. Capacity of 100-200 gph. Combined throughput, 3 in. connections, 18 in. L x 17 in. W x 19 in. H holding tank. screw 4 in. Dia., may require optional feed auger for specific flow rates, 26 in. L x 43 in. W x 52 in. H.
Crepaco Ingredient Feeder Stainless Steel
Mfg: Crepaco
Model:S-420
Stock No. 225.GR932.13
Serial: FF-2231
Crepaco S-420 Stainless Steel Feeder. Serial FF-2231. Capacity of 100-200 gph. Combined throughput, 3 in. connections, 18 in. L x 17 in. W x 19 in. H holding tank, screw 4 in. Dia., less paddles, may require optional feed auger for specific flow rates, 26 in. L x 43 in. W x 52 in. H.
1995 APV Ingredient Feeder
Mfg: APV
Model:LF-530
Stock No. HDST197.5a
Serial: N-0644
1995 APV Ingredient Feeder. Model: LF-530. S/N: N-0644. Order number: 27-00976. Drawing number: 08B-P-470471. Maximum combined base product and ingredient capacity: 2700 gph. 20 gallon infeed hopper dimensions: 19 in. dia. x 17-1/2 in. H. Agitator dimensions: 18-3/4 in. L x 2 in. H. Baldor Electric Motor, 7-1/2 hp, 1725 rpm, 208-230/460 V, 21.3-20/10 amps, 3 phase. Outlets: (1) 4 in. dia. port. Ingredient is combined with product at consistent rate by pitch and speed of auger. Overall dimensions: 55 in. L x 26-1/4 in. W x 66 in. H.
Crepaco Ingredient Feeder (Parts Machine). Model S420. S/N: C-4028-S-420. Motor, 1725 rpm, 230/460 V, 7.8/3.8 amps, 60 Hz, 3 phase. Gear Drive, ratio: 57.0, max out rpm: 55. Inlets: (1) 16-3/4 in. L x 16 in. W infeed. Outlets: (1) 4-1/2 in. dia. port. Overall dimensions: 41 in. L x 18 in. W x 52 in. H.
Auger Stainless Steel. Maximum/minimum capacities: 30/20 cu. ft. Auger screw dimensions: 18 in. dia x 12 ft. 4-1/2 in. L. Auger is equipped with a 51 in. L x 41 in. W infeed hopper. Machine uses (2) Parker pneumatic cylinders to open two bottom discharge doors. Dorris Gear Box, 25 ratio. Inlets: 48 in. L x 19 in. W infeed. Outlets: 19 in. L x 19 in. W discharge. Overall dimensions: 15 ft. 9 in. L x 41 in. W x 68 in. H.
(6) Stainless Steel Ingredient Hopper-70 Gallon. 46 in. dia. fiber glass clear covers. Outlet 9-1/2 in. Base with (4) wheel. Overall dimensions: 48 in. L x 48 in. W x 40 in. H.
AccuRate Dry Material Feeder. Model: 300. 304 stainless steel construction. Capacity: 3.69 cu. ft./hr. Food grade vinyl infeed hopper dimensions: 12 in. L x 12 in. W. Helix screw dimensions: 3/4 in. dia. x 18 in. L. Pre-sifting is possible by a 1/4 in. mesh screen. Bison DC Gearmotor, 1/8 hp, 1750 rpm, 59 rpm (final), 90 V, 1.14 amps. Dry material feeders handle a wide variety of fine powders, flakes, granules chips, and pellets. 4.0 cu. ft. extension hopper included. Inlets: 9 in. L x 9 in. W. Outlets: (1) 3/4 in. dia. discharge. Overall dimensions: 15 in. L x 15 in. W x 26-1/2 in. H.
E-Quip Manufacturing Stainless Steel Hopper-625 Cu. Ft.
Mfg: E-Quip Manufacturing
Model:129-800
Stock No. SFEP1011.14a
Serial: 6709
E-Quip Manufacturing Stainless Steel Hopper-625 Cu. Ft. With discharge conveyors. Model: 129-800. S/N: 6709. Maximum aperture/clearance above each belt: 18 in. W x 16 in. H. (2) AA Electric Stainless Steel Motor, 3/4 hp, 1730 rpm, 208-230/460 V, 2.44/1.22 amps, 60 Hz, 3 phase. (2) Grove Flex-In-Line Gear Drive, 3 ratio, 576.6 rpm (final). Overall dimensions: 11 ft. 5 in. L x 88 in. W x 85 in. H.
Vibra Screw Incorporated Volumetric Live Bin Screw Feeder 2.3 to 23 Cu. Ft/Hr
Mfg: Vibra Screw Incorporated
Model:K 1308
Stock No. SLTN019.1a
Serial: 701505
Vibra Screw Incorporated Volumetric Live Bin Screw Feeder- 92 to 920 Lbs/Hr (2.3 to 23 Cu. Ft/Hr). Model: K 1308. S/N: 701505. Stainless steel 20 in. dia. live bin with a capacity of 3 cu. ft. Screw auger diameter: 2 in. Vibrating Platform. Baldor DC Motor, 0.75 hp, 1750 rpm. 90 V, 7.0 amps. Dodge Speed Reducer, ratio: 6.2, final speed: 282 rpm, torque: 257 in-lbs. This combination produces an extremely efficient, accurate and dependable feeder for an almost infinite variety of dry materials: chemicals, foods, plastics, pharmaceuticals, metal powders, minerals, and similar materials. Outlets: (1) 6 in. dia. chute. Overall Dimension: 36 in. L x 20 in. W x 32 in. H.
Smalley Mfg. Co. Season Metering Hopper- 1.7 Cu. Ft. Stainless steel construction. Ribbon blender: 6 in. dia. x 17 in. L. Screw auger: 2 in. dia. x 44-1/2 in. L. Features a flip-top lid with a 12 in. L x 11 in. W guard screen. Guard opening dimensions: 3 in. L X 3 in. W. Syntron Electirc rotary vibrator. Gast Air Reversible Motor, Model: 4AM-FRV-13C, weight: 9 lbs, drives a 4 in. dia. 4- vane disc. The Gast air motor's non-electrical operation reduces the possibility of explosion from igniting flammable gases. Boston Gear Drive. Overall dimensions: 55 in. L. x 26 in. W. x 59 in. H.
Vibra Screw Incorporated Volumetric Live Bin Screw Feeders 2.3 to 23 Cu. Ft/Hr
Mfg: Vibra Screw Incorporated
Model:K 1308
Stock No. SLTN070.a
Serial: 701505
Vibra Screw Incorporated Volumetric Live Bin Screw Feeders- 92 to 920 Lb/Hr (2.3 to 23 Cu. Ft/Hr). Model: K 1308. S/N: 701505. Vibrating Platform. Stainless steel 20 in. dia. live bin with a capacity of 3 cu. ft. Screw auger diameter: 2 in. Baldor DC Motor, 0.75 hp, 1750 rpm, 90 V, 7.0 amps. Dodge Speed Reducer, ratio: 6.2, final speed: 282 rpm, torque: 257. Lesson Motor, 1.2 hp, 1725/1426 rpm. 209/230 V, 2/2.2 amps, 60/90 Hz, 3 phase. This combination produces an extremely efficient, accurate and dependable feeder for an almost infinite variety of dry materials: chemicals, foods, plastics, pharmaceuticals, metal powders, minerals, and similar materials. Outlets: (1) 6 in. dia. chute. Overall dimensions: 36 in. L x 20 in. W x 32 in. H.
Vibra Screw Incorporated Volumetric Live Bin Screw Feeder
Mfg: Vibra Screw Incorporated
Model:
Stock No. SLTN070B.
Serial:
Vibra Screw Incorporated Volumetric Live Bin Screw Feeder (Parts). Vibrating Platform. Baldor Motor: 0.5 Hp. 1725 rpm. 203-230/460 V, 2.1-2/1 amps. Variable Speed DC Motor, 3/4 hp, 1725 rpm, 8.0 amps. Sew-Eurodrive Speed Reducer, ratio: 11.21, final speed: 153 rpm, torque: 33 lb-in. Overall dimensions: 43 in. L x 20 in. W x 22-1/2 in. H. (parts).
Volumetric Screw Feeder. (2) Screw augers. (1) Ribbon blender. Lower screw auger: 2 in. dia. x 18-1/2 in. L. Underwriter Laboratories Motor, 1-1/2 hp, 1725 rpm, 575 V, 2a amps. Upper screw auger: 7 in. dia. x 16 in. L. WEG Motor, 5 hp, 1740 rpm, 575 V, 5.6 amps, 60 Hz. Dodge Gear Drive, 15.55 Ratio, 112 rpm (final). Ribbon blender: 14 in. dia. x 16 in. L. Inlets: (1) 10 in. x 10 in. infeed with (12) 1/4 in. bolt holes. Outlets: (1) 2 in. NPT fitting. Overall dimensions: 67 in. L x 65 in. W x 61 in. H.
Weigh Feeder. Stainless steel construction. Adjustable belt tension for improved scale accuracy. Conveyor belt width: 10-1/2 in. Leeson Motor, 1/2 hp, 1750 rpm, 180 V, 2.5 amps. SM-Cyclo Gear Drive, chain driven, ratio: 29, final rpm: 60.3, torque: 870 in.-lb. Inlets (1) 14-1/2 in. dia. Infeed hopper with an 8 in. adjustable open/close tray. Outlets: (1) 15 in. x 6 in. primary outlet, 15 in. x 3-1/4 in. secondary outlet, both with handle to select which outlet will be used. (1) 11 in. x 12-1/2in. overflow outlet with tray to dispense substance or to allow to accumulate then dispense. Overall dimensions: 53 in. L x 30 in. W x 69 in. H.
AccuRate Dry Material Screw Feeder. S/N: 61287-0815. Infeed hopper dimensions: 18 in. L x 18 in. W. Minnesota Electric Technology Permanent Magnet DC Motor. Inlets: (1) 9 in. L x 2 in. W infeed. Outlets: (1) 2 in. dia. discharge. Overall dimensions: 25-1/2 in. L x 21-3/4 in. W x 15-1/2 in. H.
Stainless Steel Premier Dump Hopper. 38 in. L x 22 in. W flip top lid. Grill spacing: 2.5 in. 11 in. L x 12-1/2 in. W discharge with an 8 in. L x 4 in. W guide for slide gate. (4) 42 in. legs. Outlets: (1) 6 in. outlet port. Overall dimensions: 65 in. L x 61 in. W x 73 in. H.
Stainless Steel Vertical Screw Auger Conveyor. Screw dimensions: 8 in. dia. x 16 ft. L. Housing diameter: 9 in. Flight pitch: 8 in. Shaft diameter: 2 in. Reliance Electric Motor, 5 hp, 1160 rpm, 230/460 V, 15.6/7.8 amps, 60 Hz, 3 phase. Driver pulley diameter: 6 in. Driven pulley diameter: 19 in. Inlets: (1) 10 in. dia. Outlets: (1) 10 in. W x 10 in. H discharge. Overall dimensions: 20 ft. 3 in. L x 2 ft. 1 in. W x 3 ft. H.
Stainless Steel Hopper. Inlets: (1) 38-1/2 in. L x 18 in. W infeed. Outlet: (1) 15-1/2 in. L x 14 in. W discharge. Overall dimensions: 79 in. L x 79 in. W x 82-1/2 in. H.
Acrison Feeder, Model 140P, 30 Gallon Mixing-Vibration Tank with cover, 28 in. x 25 in. inlet,11in. x 10 in. trough discharge, screw type paddle 1hp, 1,730 rpm(not final) 90 V, vibration 1hp 115-230 V, 1,125 rpm(not final), 64 in. W x 43 in. L x 64 in. H.
Grove Dale CenCut Auto Halver Series FC15
Mfg: Grove Dale
Model:C18 – E6027
Stock No. L22950.3
Serial: 5863
Grove Dale CenCut Auto Halver Series FC15. Model: C18 – E6027 - 33U30. S/N: 5863. Stainless steel T304. I-T-E Enclosed Switch, 600 V, 30 amps, 3 phase. Inclined feed area 33 in. W x 69 in. L, 7 in. to base adjustable, Baldor Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Infeed: 34 in. H, Exit: 55 in. H. Overall dimensions: 84 in. L x 62 in. W x 72 in. H.
Stainless Steel Ice Hopper and Auger. Baldor motor. Boston motor drive. Capacity: 100 gallon. (3) Screws: 6 in. diameter x 53 in. L. (2) Sight glasses: 10 in. L x 4 in. W. Lid opening: 21-1/2 in. L x 12-1/4 in. W. Inlet: 21 in. L x 10 in. W. Outlet: 12 in. L x 12 in. W. Overall dimensions: 92 in. L x 31 in. W x 54 in. H.
D&F Poultry Ice Hopper and Auger. Baldor motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Flexaline motor drive, 60 ratio, maximum input: 900 hp, rating: 1750 rpm, output: 28.75 rpm. Stainless steel body. Container capacity: 120 gallon. (3) Screws: 6 in. diameter x 47 in. L. Inlet: 20 in. L x 20 in. W. Outlet: 14 in. L x 12 in. W. Overall dimensions: 81 in. L x 29 in. W x 58 in. H.
Acrison Screw Weigh Auger Feeder. Model: 203B-105ZH. S/N: 76660. Infeed hopper dimensions: 1 ft. 5-1/2 in. L x 11 in. W x 10 in. H. Pre-feeder screw auger dimensions: 3 in. dia. x 2 ft. L. Pitch: 3-1/2 in. Scale-mounted weigh auger dimensions: 6 in. dia. x 1 ft. 8 in. L. Pitch: 5 in. Sterling Electric Motor. ID # G76R525R. Frame: FK56C. Insulation Class: F. 1/4 hp, 1800 rpm, 115/230 V, 6.4/3.2 amps, 60 hz, 1 phase. Inlets: (1) 1 ft. 5-1/2 in. L x 11 in. W infeed. Outlets: (1) 8 in. dia. port. Overall dimensions: 6 ft. 5 in. L x 2 ft. 7 in. W x 7 ft. 3 in. H.
Premier Dump Hopper, 6in D inlet, 4 x 8in bottom outlet, 38 x 22in opening, 2.5in grill spacing, 73in H x 61in L x 50 in W.
SOLD Vanmark Auger Stainless Steel
Mfg: Vanmark
Model:
Stock No. 65-SC-2351
Serial:
SOLD Vanmark vertical auger stainless steel elevates product to approximately 10 foot 7 inch. With the water/ product hopper it also provides a secondary seperation of non-floating products. The desired product must float and the debris falls to the bottom for manual removal.
SOLD AccuRate Dry Material Feeder SOLD
Mfg: AccuRate
Model:600
Stock No. 18a.QO5
Serial: 17177-01A-610
AccuRate volumetric dry material feeder, 600 series, serial no. 17177-01A-610 with Baldor .25 hp 1725 rpm and Reliance 1.5 hp 1725 rpm motors. Last running salt.
SOLD
Schenck/ AccuRate Model 602 Tuf-Flex Dry Materials Feeder. Motor Mfg Bison Gear & Engineering Corp. DC. Gear Motor. Model 011-302-300. 1/4 hp, 90 VDC volt, 2.9 amps. 60 rpm, Torque 220 in. lbs. Gear Ratio 34:1. Feeder Opening: 18 in. x 18 in. feeder opening. Overall measurements: 22 in. Wide, 22 in. Length, 17 in. High. Feeder is capable of feeding .0008 to 48 cubic feet per hour.
SOLD
SOLD Dodge Rotary Screw Feed Elevator SOLD
Mfg: Dodge
Model:241-489KB - SCXT1D
Stock No. 85.TGP440.12a
Serial:
Dodge 241-489KB - SCXT1D Rotary Screw Feed Elevator with 7-1/2 and 1hp drive motors, apprx 25+ Ft elevating shaft.
SOLD
SOLD Acrison Auger and Agitator Volumetric Feeder-1 cu. ft. SOLD
Mfg: Acrison
Model:1015X
Stock No. SNPM059.6
Serial:
Acrison Auger and Agitator Volumetric Feeder-1 cu. ft. Model: 1015X. Auger/agitator dimensions: 8 in dia. x 12 in. L. Metering screw auger dimensions: 2-15/16 in. dia x 30 in L. Screw auger housing: 3 in. Dispersing cone diameter: 8 in. Pacific Scientific Motor, 1 hp, 1750 rpm, 90 V, 9 amps. Dodge Gear Drive (auger/agitator), 25.64 ratio, 68.25 rpm (final). Sterling Electric Gear Drive (metering screw), 10 ratio, 175 rpm. Inlets: (1) 3 in. dia. infeed port, (1) 8 in. dia. infeed port, (1) 12 in. L x 10 in. W access door. Outlets: (1) 3-1/2 in. dia. discharge. Dry Solids Volumetric Feeders feature a dissimilar speed, dual auger/agitator metering mechanism consisting of a "conditioning" auger (or agitator) mounted above a smaller auger in a specially contoured feed chamber which is intended to simultaneously fill the metering auger with material of consistent density. Overall dimensions: 43 in. L x 41 in. W x 55 in. H.
SOLD
Acrison Volumetric Auger Feeder. Model: 1702-EE. S/N: 98135-01. GE motor, 1 hp, 1725 rpm, 115/230 V, 13.20/6.60 amps, 60 Hz, 1 phase. Comtrac motor drive, 106.1 ratio, 15.1 output rpm, 1580 output torque. Mixer with Baldor motor, 75 hp, 1750 rpm, 90 V, 7.9 amps. Ecoson motor drive, 15 ratio, 116 output rpm. Mixer flange: 4 in. W x 4 in. H with 3 hole, center to center: 8-1/2 in. Electric vibrator. SCR-DC Acrison Box control. Quick clean out port with 4-1/2 in diameter. Overall dimensions: 55 in. L x 31 in. W x 56 in H.
SOLD
Stainless Steel Hopper- 140 Cu. Ft. Stand-alone hopper is equipped with a Syntron Vibratory Equipment Vibrator, Model: V-50 D1, S/N: 19000. Electrical requirements: 115 V, 4.5 amps, 60 Hz. Infeed hopper dimensions: 77-1/2 in. L x 75 in. W. Inlets: (1) 29 in. L x 24 in. W. Outlets: (1) 14 in. L x 12 in. W discharge gate. Overall dimensions: 90 in. L x 89 in. W x 106 in. H.
SOLD
SOLD Vincent Corporation Dehydration Equipment Screw Press SOLD
Mfg: Vincent Corporation
Model:KP-6-K76
Stock No. SLTN076.18
Serial: 96175-B
Vincent Corporation Dehydration Equipment Screw Press. Model: KP-6-K76. S/N: 96175-B. Screw auger dimensions: 4-1/2 dia. x 32 in. L. Screen size: .045 in. Baldor Industrial Motor, 3 hp, 1725 rpm. 208-230-460 V, 9-8.6/4.3 amps, 60 Hz, 3 phase. Cone Drive Speed Reducer, ratio: 36.1, final speed: 47 rpm. The Vincent screw press can be used in service for light dewatering processes. The KP press, with three stages of compression instead of five, addresses these problems. It dewaters far better than a screen, yet it drives less suspended solids into the press liquor than a conventional press. Waste streams that have been successfully tested to date include: cull tomatoes, potato peel from peelers, egg shells at an egg breaker, spent brewers grain, trim material at a facility producing TV dinners, and out-of-date produce at a vegetable and fruit warehouse. Its 4 wheels allow easy maneuverability in tight spaces. Inlets: (1) 8-1/2in. dia. port. Outlets: (1) 6 in. dia. port. Overall dimensions: 71 in. L x 35 in. W x 40 in. H.
Stainless Steel Vertical Auger. 15 in. Auger diameter with a product elevation of 96 in. Product outlet: 7-1/2 in., Product bin 16 in. W x 28 in. L with a sloped bottom, with (2) 2-1/2 in. drains, 3 in. outlet, and (2) 2-1/2 in. solution inputs. Auger is top belt driven with overall dimensions of 56 in. W x 68 in. L x 118 in. H.
SOLD
Apache Auger. Model: SC-10. S/N:3693. Pitch: 9 -1/2 in., Shaft Diameter: 2 - 6/16 in. Blade Thickness: 3/16 in. 1 in. x 1 in. Mesh sections. One 12 in. x 14 in. And 30-1/2 in. x 14 in. section. Motor Information: 3 phase, 230/460 V, 1725 rpm, 3.4 amps, 60 hz. Reeves Drive: 38.4 Ratio, 1/2 HP, 126 max rpm, 12.6 min rpm. Inside Dimensions: 72 in. L x 11 in. W x 11-1/2 in. Deep. Overall Dimensions: 84 in. L x 31 in. W x 34 in. H.
SOLD
SOLD Carbon Steel Screw Auger- 16 Ft SOLD
Mfg: Not Specified
Model:
Stock No. SGMT395.a
Serial:
Carbon Steel Screw Auger- 16 Ft. Infeed pitch: 4 in. Secondary continuous pitch: 9 in. Input shaft size: 2 in. Overall dimensions: 9 in. dia. x 16 ft. L.
AccuRate Dry Material Screw Feeder. S/N: 61287-0813. Infeed hopper dimensions: 18 in. L x 18 in. W. Screw auger dimensions: 1-1/2 in. dia. x 59 in. L. Housing dimensions: 51-1/2 in. L x 2 in. W. Auger pitch: 1 in. Minnesota Electric Technology Permanent Magnet DC Motor. Inlets: (1) 9 in. L x 2 in. W infeed. Outlets: (1) 2 in. dia. discharge. Overall dimensions: 25-1/2 in. L x 21-3/4 in. W x 15-1/2 in. H.
SOLD V-Shaped Hopper with Screw Auger, Stainless Steel SOLD
Mfg:
Model:
Stock No. CCFP111.
Serial:
V-shaped Hopper with Screw Auger. Stainless steel. Hopper dimensions: 92 in. L x 36 in. W x 30 in. H. Screw auger: 9 in. dia. Elecktra motor: 1/2 hp, 1,725 rpm, 29 rpm output, 230/460 V, 2.4/1.2 amps, 60 Hz, 3 phase. Overall dimensions: 162 in. L x 48 in. W x 38 in. H.
Stainless Steel Hopper- 30 Cu. Ft. Inside dimensions: 3 ft. 11 in. L x 3 ft. 8 in. W x 2 ft. 2 in. Inlets: (1) 3 ft. 11 in. L x 3 ft. 8 in. W. Outlets: (1) 9-1/2 in. L x 2-1/2 in. W discharge. Overall dimensions: 4 ft. 10 in. L x 4 ft. 4 in. W x 7 ft. 5 in. H.
SOLD Screw Auger Feeder with Hopper- Approx. 5.5 Cu Ft. SOLD
Mfg: Not Specified
Model:
Stock No. CJR1816
Serial:
Screw Auger Feeder with Hopper- Approx. 5.5 Cu Ft. Screw auger dimensions: 11-1/2 in. dia. x 51 in. L. Infeed hopper dimensions: 41 in. L x 21 in. W. Sumitomo SM Beier Variator Variable Speed Drive, Model No. HFAMN2-1845-2, S/N 007499C, speed range: 0.2-0.8, ratio: 17. Inlets: (1) 2 in. dia. S-line fitting, (1) 24 in. L x 12 in. W infeed. Outlets: (1) 12 in. dia. flanged discharge. Overall dimensions: 99 in. L x 21-1/2 in. W x 37 in. H.
SOLD Stainless Steel Screw Auger Conveyor- 14 Ft SOLD
Mfg: Not Specified
Model:
Stock No. AARF100.
Serial:
Stainless Steel Screw Auger Conveyor- 14 Ft. Screw auger dimensions: 12 in x 12 ft. 6 in. L. Pitch: 7-3/4 in. Infeed hopper dimensions: 35 in. L x 15 in. W. Guard screen has openings that are 3-1/4 in. L x 3-1/4 in. W. Leeson Washguard Motor, 3 hp, 1770 rpm, 208-230/460 V, 60 Hz, 8.2 FLA, 3 phase. LinkBelt/PrimeGear Speed Reducer, 15.09 ratio, 1750 input rpm, 117.29 final rpm, 109 in. torque. Inlets: (1) 24 in. L x 12 in. W infeed. Outlets: (1) 13 in. L x 13 in. W discharge. Overall dimensions: 15 ft. 4 in. L x 45 in. W x 42 in. H.
