Cintex Metal Detector. Model: Auto II. S/N: 31397 26 6. Sensitivity tested with test strips as 3.5 mm ferrous metals, 4.0 non-ferrous metals, and 4.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Tomar Microstrobe Light. Model: 495S-120. Power supply: 120 VAC, 50/60 Hz. Cintex Conveyor system. Model: CS2096. S/N: 52352. Conveyor belt dimensions: 23-1/2 in. W x 7 ft. 6 in. L. Aperture/clearance: 23-1/2 in. x 5 in. H. Baldor Washdown Motor, 3/4 hp, 1725 rpm, 115/230 V, 11/5.5 amps, 60 Hz, single phase. Infeed/exit height: 32 in. Overall dimensions: 8 ft. 4 in. L x 4 ft. 9 in. W x 4 ft. 2 in. H.
Gorring Kerr Metal Detector. Model: Tektamet 60AL20RR, S/N 2019/675. Stainless steel frame. Sensitivity tested with test strips as 2 mm ferrous metals, 2.5 non-ferrous metals, and 4 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 14-1/2 in. L x 22 in. W x 5 in. H. Product clearance above belt: 4-3/4 in. Belt: 4 ft. 7 in. L x 17-1/2 in. W. Controls: S/N 14585, 300 kHz, 110 VAC. Rubber roller bands. Conveyor drive: 1/2 hp (approx.), 120/208 V plug. On casters. Overall dimensions: 5 ft. 4 in. L x 4 ft. W x 44-1/2 in. H.
Lock Inspection Systems Metal Detector Metalcheck. Model: MET 9 PHARM X. Sensitivity tested with test strips as 2.0 mm ferrous metals, 2.5 non-ferrous metals, and 4.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Automatic reject. Opening: 3/4 in. x 3-1/2 in. Inlet: 20 in. L x 15 in. W (open top hopper). Outlets: (2) 2 in. x 5-½ in. FMC vibrating unit. Syntron Magnetic Feeder. Model: F-T01A, S/N BB64837 379. 115 V, 60 Hz, 0.8 amps, 3 phase. Base: 36 in. x 30 in. with 4 legs. Unit was last used in pharmaceutical solid dose plant. Overall dimensions: 40 in. L x 30 in. W x 57 in. H. (ACN135-160).
1993 Goring Kerr Metal Detector. Model: Tek 21. S/N: 48334. Sensor capacities: 1mm ferrous, 1.5 mm non-ferrous, 3 mm stainless steel. Maximum aperture/clearance above belt without applied load: 38 in. W x 1 in. H. Maximum aperture/clearance above belt with applied load: 38 in. W x 3-3/4 in. H. Features pneumatic reject device. Electrical requirements: 110 V, 50/60 Hz. Baldor Industrial Motor: 1 hp, 1,725 rpm, 208-230/460 V, 60 Hz, 3 phase. Hub City Motor Drive: 1/1 ratio. Overall dimensions: 5ft. 10 in. L x 4ft. 9 in. W x 3ft. 8 in. H.
Goring Kerr Tektamet Metal Detector Model 1101. S/N 7885/006. Type 60SS6B. Sensitivity tested with test strips as 1.0 mm ferrous metals, 2.0 non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 10 in. W x 4 in. H. Conveyor length 59 in. LS Motor, 1/3 hp, Model 56, 60 Hz, 3 phase, 230/460 V. Overall Dimensions 60 in. L x 30 in. W x 42 in. H.
Thermo Fisher Scientific / Ramsey Technology / Icore Autocheck 8000 Checkweigher and Metal Detector
Mfg: Ramsey Technology
Model:AutoCheck 8000
Stock No. HDFD068.8
Serial: 93MJ060
Thermo Fisher Scientific / Ramsey Technology / Icore Checkweigher and Metal Detector. Model: AutoCheck 8000. Frame: 8120. S/N: 93MJ060. Dual conveyor belt dimensions: 7 ft. 10 in. L x 1 ft. 2 in. W. Infeed/exit height: 31 ½ in. Metal Detector: Ramsey Icore Metal Scout. Maximum aperture/clearance: 1 ft. 2 in. L x 6 in. H. Dual pneumatic reject mechanism dimensions: (2) 8 in. L x 6 in. W. (2) Electrol Company Electric Motors, ¼ hp, 1725 rpm, 90 V, 3 amps, 60 Hz, single phase. Pacific Scientific Electric Motor, ¼ hp, 1750 rpm, 90 V, 2.5 amps, 60 Hz, single phase. Adjustable operator touch-pad control panel. The AC-8000/FR8120 Checkweigher System is a high accuracy machine designed to perform weight inspection of products in a production process or package line. The machine transports, accurately weighs, and automatically classifies raw products, containers, or packages on the basis of weight. It can perform these functions without interrupting product flow, and normally requires no operator attention during production. Overall dimensions: 9 ft. 3 in. L x 3 ft. 3 in. W x 5 ft. 2 in. H. (ACN400).
Lock Metal Check 9 Metal Detector. Model: HDS. S/N: 20264. Height at conveyor infeed: 46 in. Height at conveyor exit: 47 in. Maximum aperture/clearance above belt: 30 in. W x 2 in. H. 16 in. L x 28 in. W. Sensitivity tested with test strips as 2.5 mm ferrous metals, 2.5 non-ferrous metals, and 3.5 mm non-magnetic stainless steel. Chain link belt conveyor feeds a rubber belt pass-thru conveyor. Metal detector is set up with a pneumatic reject mechanism. Baldor Stainless Steel Industrial Motor, 1 and .75 hp, 1740/1440 rpm, 208-230/190 V, 3.2-3/2.8 amps, 60/50 Hz, 3 phase. Overall dimensions: 63 in. L x 46 in. W x 53 in. H.
Goring Kerr Tektamet Metal Detector, Model 1101, Type 60SS6B, S/N 7885/021. Sensitivity tested with test strips as 1.0 mm ferrous metals, 2.0 non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 8 in. W x 6 in. H. Conveyor length 59 in. L, plastic conveyor belt, LS Motor, 1/3 hp, Model 56, 60 Hz, 3 phase, 230/460 V, Unit has been tested. Overall Dimensions 62 in. L x 33 in. W x 44 in. H.
1995 Eriez UMetal Detector Model EZ35X12, S/N 85590, Sensitivity tested with test strips as 1.5 mm ferrous metals, 2.0 non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 5 in. x 12 in. Washdown duty, stainless steel enclosure, 110 VAC, 1 phase, 60 Hz. Control Panel works properly.
1995 Eriez UMetal Detector Model EZ35X12, S/N 65960-1. Sensitivity tested with test strips as 1.5 mm ferrous metals, 2.0 non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 5 in. x 12 in. aperture. Washdown duty, stainless steel enclosure, 110 VAC, 1 phase, 60 Hz, Control Panel works properly.
1996 Cintex AutoSearch II Metal Detector. Model: MIH 26x16 SS. S/N: 10200. Auto2. Sensitivity tested with test strips as 2.5 mm ferrous metals, 2.5 non-ferrous metals, and 3.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 26 in. W x 16 in. H. Overall dimensions: 44 in. L x 20 in. W x 30 in. H.
1999 Goring Kerr Ferrous In Foil Metal Detector. Type 2020, S/N 57201. Aperture above belt: 15-3/4 in. W x 8 in. H. Overall dimensions: 109 in. L x 31 in. W x 43 in. H. Custom made to detect ferrous metals for products packaged in aluminum foil. Non-ferrous and stainless steel contaminants will not be detected.
1997 Graseby Goring Kerr Metal Detector. Model: DSP2. S/N: 22170. The maximum aperture above the belt if a belt is installed will be of 9-3/4 in. W x 6-3/4 in. H. Currently it is @ 10 in. W x 7 in. H. Sensitivity:1.0-1.5 mm ferrous metals, 1.0-1.5 mm non-ferrous metals and 1.5-2.0 mm non-magnetic stainless steels. DSP2 Metal Detector offers the most sensitive solution to meet your legal obligations and protect your brands. The design incorporates the hygienic needs of the food industry and the requirements for extreme reliability. Features include a digital display with touchpad controls and stainless steel frame. Conveyor infeed/exit height: 36 in. Overall dimensions: 31 in. L x 28 in. W x 56 in. H.
1994 Cintex Auto Search II Metal Detector. Model MTH18x4PTD, S/N 05292AUTO2. Sensitivity tested with test strips as 1.5 mm ferrous metals, 2.0 non-ferrous metals, and 2.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 17-7/8 in. W x 4 in. H. Overall dimensions: 34 in. L x 12 in. W x 12 in. H.
Conveyor Section with Reject Mechanism. Belt dimensions: 48 in. L x 12 in. W. Reject mechanism pneumatically operated; (2) sensors. Baldor motor: 5 hp, 1,725 rpm, 208-230/460 V, 1.9/.9 amps, 60 Hz, 3 phase. Overall dimensions: 62 in. L x 55 in. W x 33 in. H. Ideal for placement immediately after metal detectors and checkweighers for defective product ejection.
Safeline Metal Detector. Module S/N: 59331. Hardware Version: V3c. Firmware Version: XT1-02. Aperture/clearance: 6 in. x 4-1/2 in. Conveyor belt dimensions: 6 ft. 2 in. L x 4 in. W. Infeed/exit height: 3 ft. / 2 ft.10 in. Overall dimensions: 8 ft. 3 in. L x 2 ft. 4 in. W. x 3 ft. 9 in. H.
Safeline Metal Detector. Model: PPH/5x6/100-300/SS/H20/V3/OVSQ. S/N: 28772. Reference No. 12626-03. M/C: 333. Module Hardware Version: V3c. Firmware Version: XT1-02. Aperture/clearance: 5-1/2 in. x 5-1/2 in. Conveyor belt dimensions: 13 ft. 6 in. L x 3 in. W. Infeed/exit height: 46-1/2 in. Reliance Electric Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 2.2-2.2 amps, 60 Hz, 3 phase. Overall dimensions: 13 ft. 6 in. L x 2 ft. 3 in. W x 4 ft. 11 in. H.
Loma Cintex Vertical Metal Detector. Model: IQ. S/N: BPL-07077-16164. Control ID No. BMH07017-16164. Frequency: 209 KHz. Filter Values: 470 K. Power supply: 85-265 V, 50/60 Hz, single phase. Inlet/outlet: (2) 2 in. dia. S-line fittings. Overall dimensions: 2 ft. 2 in. L x 1 ft. 8 in. W x 5 ft. 10 in. H.
Safeline Powerphase Control Module Model 100/300. S/N Hardware V3C, Firmware XT 1.16. A stainless steel and wash down certified model with a minimum IP rating of 55, this control module fits the Safeline Signature®, Signature II® and Powerphase Plus® series of metal detectors used to inspect products in the food, pharmaceutical, plastics and chemical industries. Safeline detectors utilize low power, high frequency, magnetic field coil systems which have the ability to sense minute magnetic disturbances created by metal particles passing through the aperture of field inside the detector. Overall dimensions: 9-1/2 in. L x 6 in. W x 10 in. H. (ACN50).
Metramatic Metal Detector. Model: MMD14-4. S/N: 59483 E. Metal detection surface: 15 in. L x 11-1/2 in. H. Maximum product aperture: 3-3/4 in. W x 11-1/4 in. H. Sensitivity tested with test strips as: 2.5 mm ferrous, 2.5 mm non-ferrous, and 4.0 mm non-magnetic stainless steel. Electrical requirements: 115 V, 1 phase, 60 Hz. Baldor motor: 1/4 hp, 1725 rpm, 115-208/230 V, 5/2.6-2.5 amps, 60 Hz, 1 phase. Perfection gear motor, maximum horse power: 0.88, ratio: 10-1, final rpm: 172.5. Control box, DC microamperes gauge: 0-200. Manual controller for sensitivity: 0-10; fine controller: 0-10. Alarm light, on/off power light, switch on/off power. Overall dimensions: 81 in. L x 25 in. W x 54 in. H.
Safeline Metal Detector. 20 in. W x 8 in. H opening, with 19 in. W x 20 ft. L, 90 degree intralox conveyor, complete with automatic reject system.
Safeline Metal Detector
Mfg: Safeline
Model:
Stock No. RBFM1021.90
Serial:
Safeline Metal Detector. Aperture13 in. x 20 in. x 12 in. on stainless steel frame.
Magnetic Plate and Tube Trap
Mfg:
Model:
Stock No. SGMT342B.1a
Serial:
Magnetic Plate and Tube Trap. (8) 1 in. dia. x 13-1/2 in. H magnetic fingers. Dual handle allows for easy dipping and removing. Magnets remove the hazards of unwanted ferrous and work-hardened stainless contaminants from processing lines. They capture the very finest of particles that pass undetected through electronic metal detectors. Overall dimensions: 19 in. L x 11 in. W x 18 in. H.
2000 Cesco Magnetics Magtrap. Model 135. S/N: 35955. Material of construction: 316 stainless steel. Capacity ranges between 150gpm to 30gpm depending on product viscosity. Maximum pressure: 200 psi. Inside dimensions: 5 ½ in. dia. x 3 ½ in. H. (5) Magnetic tubes, dimensions: 1 in. dia. x 5 in. H. MAGTRAPs remove the hazards of unwanted ferrous and work-hardened stainless steel contaminants from processing lines capturing very fine of particles that pass undetected through electronic metal detectors. Tube magnets are ideal for liquids, purees, and products with small solids (less than 1/2" ). The MAGTRAP 135 is USDA approved and features quick release clamps and a removable base making the unit easily accessible for cleaning. Inlets/outlets: (2) 2 in. dia. I-line fittings. Overall dimensions: 1 ft. L x 8 in. W x 8 ½ in. H. (ACN23).
Safeline Metal Detector, Model SR-25-194, 8 in. W x 97 in. L flat plastic belt, 4-1/2 in. H x 8 in. H product entrance, 48 in. H x 104 in. L x 28 in. W. Inspected and Certified by metal detector technician. It detects 1 Fe, 1 NFe, 1 S/S.
This unit has almost 4 in. of clearance over the belt. The head has a 10 in. wide x 4 in. wide opening. It is currently set up with a 2-1/2 in. clearance over the belt, but it is easily adjusted to almost 4 in. over the belt clearance. The plastic belt is 8 in. wide. The unit indicates that it is set up for 240 volt, 2 phase service, however, it currently does not have a motor for the belt drive. A motor will be included at time of sale. The unit could use a single phase 120 volt motor as the other units do.
The following information is on the inside of the control box:
Module Serial # 50515, Hardware version: V2C, Firmware version: 2.15, Standard module, Reject confirmation, Frequency: 300, STAG: 3, 4 wire, RS232 SS
SOLD
Goring Kerr TEK-21 metal detector, 5 inch x 8 inch opening, 12 inch long tunnel, 110 volts.
SOLD
SOLD Goring Kerr TEK-21 Metal Detector SOLD
Mfg: Goring Kerr
Model:TEK-21
Stock No. 12a.QO7a
Serial:
Goring Kerr TEK-21 metal detector, 5 inch x 8 inch opening, 12 inch long tunnel, 110 volts.
SOLD
SOLD Goring Kerr TEK-21 Metal Detector SOLD
Mfg: Goring Kerr
Model:TEK-21
Stock No. 12a.QO8a
Serial:
Goring Kerr TEK-21 metal detector, 5 inch x 8 inch opening, 12 inch long tunnel, 110 volts.
SOLD
SOLD Goring Kerr Fluid Metal Detector SOLD
Mfg: Goring Kerr
Model:426
Stock No. ENCA726
Serial: 19649/13
Goring Kerr Fluid Metal Detector, Model 426, Type Tektamet, Serial 19649/13, 110 V, Aperature of tube 3 in Dia.x 5 in Deep with 11/16 in clearance to detector circular inner wall, 28 in L x 21 in W x 49 in H, 3 in. tri-clamp connections.
SOLD
Elevated conveyor with stainless steel chute, Loma IC Metal Detector 925260/925929, 5-7/8 in. H x 19-3/4 in. L x 11-3/4 in. deep, 4-3/4 in. clearance above belt, belt is a slotted belt with slot dimensions 15 in. W x 18 in. L with 2 in. H (vertical lips), 10 ft. total height, 9 ft. 3 in. to highest point on belt.
SOLD
Safeline Metal Detector, Model PPH/222X06/SS/100-300/HD/V3. S/N 51444. Clearance of metal detector: 4-½ in. H. Belt (2) 1st is 20 in. W, 49 in. L. 2nd belt: 20 in. W, 120 in. L. Reference number 17574-01. Baldor Motor: VWDL3504, Spec 35J304-154G1, ½ hp, 115/230 volt, 8/4 amps, 1,725 rpm, 56C frame, 60 Hz, 1 phase, Code L, Des. N, Class F. Rating 40 amb cont. Baldor Cat No. VWDL3504, SPEC 35J304-154G1, 1/2 Hp, 113/230 volt, 8/4 amps, 1725 rpm, 56 C frame, 60 Hz, 1 Ph, Class F. Overall dimensions: 46 in. W, 171 in. L, 46-½ in. H. Cost New $32,100
SOLD
SOLD Loma Metal Detector Model Super Scan Micro- ISC SOLD
Mfg: Loma
Model:Super Scan Micro- ISC
Stock No. HDNW162.31
Serial: MD24056
Loma Metal Detector. Model Super Scan Micro- ISC. S/N MD24056. Aperture Size: 14 in. W x 9 in. H. Maximum product clearance above belt 14 in. wide x 7.75 in. high. . Unit has been tested and detects 2.0mm Non-magnetic SS, 1.5mm Non-Fe Metals, and 1.5mm Fe metals. 115VAC, 2.0 Amps, 1 phase, 256 KHZ. Bodine Electric Co. Gear Motor. Specification 1/2 hp, 70/85 rpm, 1.9-.95/1.4/.7 Amps, 50/60 Hz, 3 phase, 167lb-in. Torque. Conveyor is 10 in. wide x 118 in. long. Overall Dimensions 32 in. W x 118 in. L x 61 in. H.
SOLD 1998 Safeline Stainless Steel Metal Detector SOLD
Mfg: Safeline
Model:STD16X14/55/300/1L/1/12/RC/RFI
Stock No. HDNW112.42a
Serial: 32051
1998 Safeline Stainless Steel Metal Detector. Model STD16X14/55/300/1L/1/12/RC/RFI. Reference No. 12927-07. Maximum product clearance/aperture opening above belt: 15-5/8 in. W x 12-1/2 in. H. Unit detects 2.5 mm non-Fe, 2.5 mm non-magnetic SS, and 2.5 mm Fe. Detector is frame mounted. Includes a 14 in. W belt. Detector specifications: 115/480 V, pneumatically controlled reject device. Height at product inlet- 46-1/2 in. Height at conveyor- 20 in. Baldor Industrial Motor: .5 hp, 1,725 rpm, 208-230/460 V, 2.1-2/1 amps, 60 Hz, 3 phase, 56C frame. Boston Gear 700 Series Drive Motor: .46 hp (input), 500 torque lb-in. (output), 40 gear ratio. Overall dimensions: 168 in. L x 40 in. W x 76 in. H.
SOLD
SOLD Cintex Metal Detector Auto II Model MIH 14 x 5ss SOLD
Mfg: Cintex of America
Model:MIH 14 x 5ss
Stock No. 75.END36896
Serial: 9999Auto 2
Cintex of America Metal Detector Auto II. Model MIH 14 x 5ss. S/N 9999Auto 2. Aperture size 14 in. W x 5 in. H. Sensitivity 2.0 mm Non Ferrous metals, 1.0 mm Ferrous metals, 2.5 mm 316 Non-Magnetic stainless steel. Factory set Frequency - Medium. Overall Dimensions: 29 in. L x 15 in. W x 14 in. H.
SOLD
SOLD Safeline Metal Detector with Intralox Conveyor System SOLD
Mfg: Safeline
Model:STD14*14/SS/HD
Stock No. SBPP03.
Serial: 13024
Safeline Metal Detector with Intralox Conveyor System. Model: STD14*14/SS/HD. S/N: 13024. 316 stainless steel Safeline metal detector head. Maximum product aperture/clearance above belt: 10-1/2 in. W x 13 in. H. Sensitivity: 2.0 mm non-magnetic stainless steel, 1.5 mm non-ferrous metal, 1.5 mm ferrous metal. Conveyor equipped with Intralox plastic modular conveyor belt, 100 series, raised grid, polypropylene construction, 216 in. L x 12 in. W, 11-tooth sprockets, and 1.5 in. sq. bore. System is equipped with pneumatic part rejection mechanism and Allen-Bradley power switch. Unimount 125 U.S. Motor: .33 hp, 1745 rpm, 230/460 V, 1.2/0.6 F.L. amps, 60 Hz, 3 phase. Motor Drive: 20/1 WR ratio. Motor drive to belt drive is possible by (2) sprockets with a 2.5:3 ratio. Overall dimensions: 102 in. L x 34 in. W x 67-1/2 in. H.
Safeline Metal Detector. Model STD14*14/SS/HD, S/N 13024. Reg # 9372-1. Aperture above belt: 14 in. W x 13-1/2 in. H. Sensitivity: 2.0 mm non- magnetic stainless steel, 1.5 non-ferrous, 1.5 mm ferrous metals. Overall measurements: 35 in. L x 15 in. W x 25 in.H. Interlux Belt: 216 in. L x 12 in. W., raised grid, polypropylene material, 11 tooth sprockets, bore- 1-1/2 sq in. US Conveyor motor : 0.33 hp, 3 phase, 60 Hz, 1,745 rpm, 230/460 V, F.L. amp 1.2/0.8, S.F. amp 1.6/0.8. Overall dimensions: 101 in. L x 34 in. W x 69 in. H.
SOLD
Cintex Metal Detector. Model Auto II. Sensitivity tested with test strips as 1.5 mm ferrous metals, 2 non-ferrous metals, and 2.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 18 in. W x 6 in. H. Mesh belt: 105 in. L x 18 in. W. Overall dimensions: 50 in. L x 39 in. W x 52 in. H (adjustable).
SOLD
SOLD 1996 Cintex AutoSearch II Metal Detector SOLD
Mfg: Cintex
Model:MIH 26x16 SS
Stock No. DSBI114.5a
Serial: 10466
1996 Cintex AutoSearch II Metal Detector. Model: MIH 26x16 SS, S/N: 10466. Aperture: 26 in. W x 16 in. H. Overall dimensions: 44 in. L x 20 in. W x 30 in. H. (ACN175)
SOLD
Goring Kerr Metal Detector. Model Tek 21 5*14, S/N 21590. Sensitivity tested with test strips as 1.0 mm ferrous metals, 1.5 non-ferrous metals, and 2.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 14 in. W x 4 in. H. 460 V, 3 phase. With 96 in. conveyor. Overall dimensions: 110 in. L x 28 in. W x 53 in. H.
SOLD
SOLD 1996 Cintex AutoSearch II Metal Detector SOLD
Mfg: Cintex
Model:MIH 26x16 SS
Stock No. DSBI115.5a
Serial: 10200
1996 Cintex AutoSearch II Metal Detector. Model: MIH 26x16 SS. S/N: 10200. Auto2. Sensitivity: 2.5 mm Fe, 2.5 mm non-Fe, 3.5 mm non-magnetic stainless steel. Aperture: 26 in. W x 16 in. H. Overall dimensions: 44 in. L x 20 in. W x 30 in. H.
SOLD
SOLD 2003 Loma Metal Detector IQ^2 with Conveyor SOLD
Mfg: Loma
Model:IQ2
Stock No. SGMPB161.28
Serial: KIMD12357
2003 Loma Metal Detector IQ^2 with Conveyor. Model: IQ2. S/N: KIMD12357. Sensitivity tested with test strips as 1.5 mm ferrous material, 1.5 non-ferrous material, 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditiions, product tested and other factors. Clearance: 13-3/4 in. W x 4-3/4 in. H. Frequency: 307 KHz. Coil gap: 4.7 in. Power: 85-285 V, 50&60 Hz. Dayton Gear motor, ½ hp, 61 rpm, 115 V, 7.8 amps, 60 Hz, 1 phase, 28.6:1 ratio, 480 torque. Belt dimensions: 60 in. L x 12 in. W. Overall dimensions: 64 in. L x 39 in. W x 54 in. H. (ACN175)
SOLD
SOLD 2002 Loma Metal Detector IQ^2 with Conveyor SOLD
Mfg: Loma
Model:IQ2
Stock No. SGMPB175.37
Serial: KIMD11237D
2002 Loma Metal Detector IQ^2 with Conveyor. Model: IQ2. S/N: KIMD11237D. Sensitivy tested with test strips as: 1.5 mm ferrous materials, 1.5 non-ferrous materials, 2.0 non-magnetic stainless steel. Frequency: 316 KHz. Coil gap: 4.7 in. Power: 120 V, 2 amps, 50&60 Hz. Dayton Gear motor, ½ hp, 61 rpm, 115 V, 7.8 amps, 60 Hz, 1 phase, 28.6:1 ratio, 480 torque. Clearance above belt: 13-3/4 in. W x 4-3/4 in. H. Belt dimensions: 60 in. L x 12 in. W. Overall dimensions: 64 in. L x 39 in. W x 54 in. H. (ACN175)
SOLD
SOLD 2002 Loma Metal Detector IQ^2 with Conveyor SOLD
Mfg: Loma
Model:IQ2
Stock No. SGMPB176.37
Serial: KIMD11237C
2002 Loma Metal Detector IQ^2 with Conveyor. Model: IQ2. S/N: KIMD11237C. Sensitivy tested with test strips : 1.5 mm ferrous material, 2.0 mm non-ferrous material, 2.0 non-magnetic stainless steel. Frequency: 316 KHz. Coil gap: 4.7 in. Power: 120 V, 2 amps, 50&60 Hz. Dayton Gear motor, ½ hp, 61 rpm, 115 V, 7.8 amps, 60 Hz, 1 phase, 28.6:1 ratio, 480 torque. Clearance: 13-3/4 in. W x 4-3/4 in. H. Belt dimensions: 60 in. L x 12 in. W. Overall dimensions: 64 in. L x 39 in. W x 54 in. H. (ACN175)
SOLD
Safeline Metal Detector w/Conveyor. Model PPH/14X06/SS/100-300/HO/V3. S/N: 57457. REF NO. 19004-01. M/C NO. 333. REF PHASE -02.54, PWR/DR NO. 076, OOBV 520, M/C NO.313, REF PHASE 520, PWR/ DR NO.051 OOBV 00.00. Sensitivity tested with test strips as 1.5 mm ferrous material, 1.5 non-ferrous material, 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested and other factors. Clearance above belt: 13-3/4 in. W x 4 in. H. Belt: 12 in. W. Detector head without guards: 13-3/4 in. W.; with guards: 12-3/4 in. W. (4) Locking casters. Wheels: 4 in. dia. Stainless all-thread gives about 6 in. of adjustment, and casters will raise the conveyer 6-1/2 in. from its lowest position. (ACN395)
SOLD
Safeline Metal Detector. Model STD/12X06/PW/100K112. S/N 3062. Sensitivity tested with test strips as 1.0 mm ferrous metals, 1.0 non-ferrous metals, and 1.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 12 in. W x 5 in. H. Belt dimensions: 58-½ in. L x 9 in. W. Dayton Electric Motor, ½ hp, 3,450 rpm, 115/230 V, 7.8/3.9 amps, 60 Hz, 1 phase. Boston Gear Box: Input hp: 0.4. Output torque: 235 lb/in. Ratio: 20, Cat No. F713-20-5-J 40. Includes entry slide and pneumatically actuated rejection device. (4) Legs: 8 in. H. Overall dimensions: 102 in. L x 32 in. W x 60 in. H.
SOLD
Loma Metal Detector with Conveyor. S/N 20477. Sensitivity tested with test strips as 3.5 mm ferrous metals, 3.0 non-ferrous metals, and 3.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 16 in. W x 6 in. H. Contract number MD20/5912, 110 V, 60 Hz, frequency 117 k/cs, transmitter vinkor part number D4572, receiver vinkor part number D4571. Belt dimensions: 66 in. L x 12 in. W. Conveyor motor: 1/4 hp, 1,725 rpm, 60 Hz, 1 phase, 208-115/230 V, 5.0/2.5 amp. Overall dimensions: 68 in. L x 35 in. W x 52 in. H.
SOLD
1990 Loma Superscan S Metal Detector. Model: Superscan. S/N: 30S 457. Contract number: MD89/0609. Maximum aperture/clearance: 16 in. W x 12 in. H. Sensitivity tested with test strips as 2.5 mm non-magnetic stainless steel, 2.0 mm non-ferrous metals, and 2.0 mm ferrous metals. Frequency: 204.80 KHz. Damping: none. Electrical requirements: 115 V, 1 amp, 60 Hz. Overall dimensions: 38 in. L x 20 in. W x 24 in. H.
SOLD
SOLD Loma Metal Detector Model Super Micro ISC SOLD
Mfg: Loma
Model:Super Micro ISC
Stock No. HDSC259I.17
Serial: 265769
Loma Metal Detector. Model Super Micro ISC, Contract No. CB95-19738. Head S/N 265769. Date of Manufacture 05/95. Sensitivity tested with test strips as 2.0 mm ferrous metals, 2.5 non-ferrous metals, and 3.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 8 in. x 24 in. Conveyor 5 ft. long x 18 in. wide.115 VAC, 2 amp. Control ID No. I9644. Conveyor Motor is Bodine Electric Co. 1/6 hp, 28 rpm, 115 volt, 3.6 amps. Overall dimensions 43 in. W x 64 in. L x 52 in. H. Unit has been tested and has tested good.
SOLD
Loma Superscan S Metal Detector. Contract No: MD20/6298. Sensitivity tested with test strips as 1.5 mm ferrous metals, 2.0 non-ferrous metals, and 3.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 14 in. W x 5 in. H. Equipped with adjustable sensitivity knob. Damping: 14.7 K. XGA: 4.7M. Electrical requirements: 110/480 V, 60 Hz, 3 phase. Overall dimensions: 32 in. L x 13 in. W x 13 in. H.
Safeline Metal Detector. Model: STD300X125/P/IL/V2. S/N: 9123. Job No: 8385. Maximum aperture/clearance above belt: 12 in. W x 4 in. H. Frequency: 300 kHz. Sensitivity: 2.0 mm ferrous metals, 2.5 mm non-magnetic stainless steel, 2.0 mm non-ferrous metals. Detector features an indicator beacon and pneumatic reject piston that empties product into a 15 in. L x 12 in. W x 17 in. H reject tray. (2) Banner Mini-Beams, Model: SM312D. Conveyor infeed/exit height: 33-1/2 in. Overall dimensions: 73 in. L x 40 in. W x 63 in. H.
SOLD Cintex Auto Search Metal Detector with Conveyor
Mfg: Cintex
Model:
Stock No. SBPP02.
Serial: 21232
Cintex Auto Search Metal Detector with Conveyor. Metal detector head: S/N 21232. Sensitivity tested with test strips as 2.0 mm ferrous metals, 2.5 non-ferrous metals, and 4.5 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 37-½ in. W x 5 in. H. Baldor Motor: 1 hp, 230/460 V, 3.4/1.7 amp, 1,725 rpm. Conveyor belt: polypropylene; 96 in. L x 36 in. W. Overall dimensions: 103 in. L x 60 in. W x 49 in. H.
SOLD
SOLD Ramsey-Icore Metalscout II Metal Detector SOLD
Mfg: Ramsey-Icore
Model:
Stock No. 105.TAPG37.15a
Serial: 950-388-42
Ramsey-Icore Metalscout II Metal Detector. S/N 950-388-42. Aperture: 8 in. W x 11-1/2 in. H. Baldor Industrial Motor, CAT No. VWDL3504, S/N F298. 1.2 hp, 115/208/230 V, 60 Hz, 8/4.4-4 amp, 1,725 rpm. Morse Transmission, part # SFI214056C, S/N XEII68BO2NE, ratio 40:1. Overall dimensions: 75 in. L x 25 in. W x 54 in. H.
SOLD Barkley & Dexter Clearline Metal Detector SOLD
Mfg: Barkley & Dexter
Model:B
Stock No. OI428.
Serial: 0008211
Barkley & Dexter Clearline Metal Detector. Model: B. S/N: 0008211. Clearance above belt: 8 in. W x 14 in. H. Total clearance through aperture: 8 in. W x 15 in. H. Conveyor belt dimensions: 92 in. L x 6 in. W. Reliance motor. Model FL56P, 1/2 hp, 1,725 rpm, 60 Hz, 2.2 amps, 3 phase, 230/460 V. Overall dimensions: 94 in. L x 35 in. W x 52 in. H.
CEIA Metal Detector. Model THS. S/N 20200209005. 7 in. x 13 in. opening.
SOLD Goring Kerr Metal Detector SOLD
Mfg: Goring Kerr
Model:Tektamet
Stock No. SPPF294.
Serial: 20531
Goring Kerr Metal Detector. Model: Tektamet. S/N: 20531. Sensitivity tested with test strips as 1.0 mm ferrous metals, 1.0 non-ferrous metals, and 2.0 mm non-magnetic stainless steel. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 22 in. W x 3 in. H. Electrical requirements:120 V, 50-60 Hz, 1 phase. Overall dimensions: 40 in. L x 14 in. W x 15 in. H.
1997 Safeline Powerphase Metal Detector. Model: PPH/14x09/SS/100-300/HD/SLOWSPEEDMOD. S/N: 45469. M/C No: 333. Has a USDA approved, dual-frequency, Stainless Steel, PowerPhase, 100/300 Khz heavy duty wash down head, with a genuine PowerPhase Control Module installed. The dual frequency head allows for more applications having two operating frequencies available. Ref. ph: +02.96. Pwr/Dr. No: 060. M/C No: 333. Ref. ph: -00.68. Pwr/Dr. No: 055. Module S/N: 74760. Hardware version: V3C/S. Firmware version: XT1-10. Baldor Industrial Motor, 1/2 hp, 1725 rpm, 115/230 V, 8/4 amps, 60 Hz. Boston Gear 700 Series Speed Reducer. Aperature 13-1/2 x 7. Conveyor infeed/exit height: 27 in. Overall dimensions: 24-1/2 in. L x 33 in. W x 41 in. H. (ACN275).
SOLD 1997 Loma Cintex Auto Search Metal Detector w/ Conveyor SOLD
Mfg: Loma Cintex
Model:AUTO
Stock No. SBPP01.
Serial: 10864
1997 Loma Cintex Auto Search Metal Detector w/ Conveyor. Model AUTO, S/N 10864. Sensitivity tested with test strips as 2.0 mm ferrous metals, 3.0 non-ferrous metals, and 5.5 mm non-magnetic stainless steel. Results may vary depending on site conditions, variances in product tested, and other factors. Search coils used to pick up and amplify disturbances triggered by ferrous and non-ferrous products are cast into an epoxy resin block to ensure the utmost stability and freedom from the effects of water or vibration. This machine was designed with wash down capabilities. Maximum aperture/clearance above belt: 37-1/2 in. W x 4-1/2 in. H. Conveyor belt: 8ft. L x 3ft. W. Baldor Motor: 3/4 hp, 208 - 230/460 V, 2.3 - 2.2/1.1 amp, 1,725 rpm, 60 Hz, 3 phase. Tigear Gear Box: size ratio 56/262- 60, max input hp 0.82, output torque 1,104, input rpm 1,750. Overall dimensions: 8ft. 7 in. L x 5ft. W x 4ft. 1in. H. (ACN230). FAD
SOLD Safeline Gravity Feed Metal Detector, Model GF 150 SOLD
Mfg: Safeline
Model:GF150/P/FM/15'R/SCB1/TK/RC/QRC
Stock No. NPPC140.
Serial: 10345
Safeline Gravity Feed Metal Detector. Model GF150/P/FM/15'R/SCB1/TK/RC/QRC, S/N 10345. M/C# 033, REF# 9291-1, PWR/DR # 140, OOBV 110 MV, Ref Phase 2923. 110 V. Inlet: 5-½ in. (top), Outlets: (2) 10 in. W, 3-½ in. L (bottom). Has control box, not attached.
Loma metal detector with pneumatic reject mechanism. Model: AUTO2. S/N: 8428. Detector power supply: 110 V. Freq: H. Cintex Power Conveyor Model: CS2060, S/N: L3850. Belt width: 12 in. Maximum aperture/clearance: 12 in. W x 8-1/2 in. H. Pneumatic reject mechanism dimensions: 6 in. L x 4 in. W. Leeson Electric Motor with Drive, 1/3 hp, 1725 rpm, 113 V, 3.1 amps, 60 Hz, 3 phase. Conveyor infeed/exit height: 33 in. Loma Systems is a world class manufacturer of inspection systems with installations in over 60 countries and in most of the world’s largest food and packaging companies. Loma Systems holds ISO 9001 certification and has earned a reputation for the consistent quality and advanced technology of its products. Overall dimensions: 6ft. 3in. L x 3ft. W x 3ft. 10 in. H. (ACN150).
SOLD 1993 Safeline Conveyor w/ Metal Detector SOLD
Mfg: Safeline
Model:14X8350X200PW/HT/STD
Stock No. SBPP84.28
Serial: 6283
1993 Safeline Conveyor w/ Metal Detector. Model 14X8350X200PW/HT/STD, S/N 6283. Sensitivity: 2.0 mm ferrous metals, 2.5 mm non-magnetic stainless steel, 2.5 mm non-ferrous metals. Actual numbers may vary depending on local site conditions, product tested, and other factors. Maximum aperture/clearance above belt: 14 in. W x 7.5 in. H. Frequency: 300 KHz (031), ref phase 2341. Norgen piston: PSN NB08A-E02-AAB00, 1-1/8 in. x 8 in. S/N 2067044. Max psi 150 (air). Lesson motor w/ gear box. Model M6017FC1F. 1,725 rpm, 1/2 hp, 60 Hz. Boston gear box: 700 series, catalog # F71815B5J-91. Input: .91 hp, ratio 15. Polypropylene conveyor belt: 80 in. L x 12 in. W.
Safeline detectors utilize a low power high frequency magnetic field coil system which has the ability to sense minute disturbance created by metal particles. A metal particle passing through the aperture of the detector will create changes in the magnetic field inside the detector. Overall dimensions: 6 ft. 8 in. L x 2 ft. 8 in. W. 4 ft. 4 in. H.(ACN25).
SOLD 1995 Loma Systems Superscan Metal Detector SOLD
Mfg: Loma Systems
Model:Superscan
Stock No. KAAM0406.25a
Serial: 395244H
1995 Loma Systems Superscan Metal Detector. Model: Superscan. S/N: 395244H. Contract No: MD95-19495. Control ID: I9403. Aperture: 1 ft 2 in. W x 4 in. H. Maximum aperture/clearance above belt: 1 ft. 2 in. W x 3 in. H. Frequency: 102.4 kHz. Coil gap: 3.2 in. Filter values: 220 k R. Power supply: 115 V, 2 amps, 60 Hz. Belt width: 12 in. Conveyor infeed height: 32 in. H. Conveyor exit height: 45 in. H. As part of Loma’s world class Superscan line of inspection systems, this unit was originally installed with Swift-Eckrich in Kansas City, Kansas, features a Micro – ISC control box and stainless steel construction enabling operation under harsh washdown conditions. Overall dimensions: 6 ft. 6 in. L x 2 ft. 8 in. W x 4 ft. 1 in. H.(ACN120).
