1997 Productive Automated Systems Corporation Pallet Dispenser / Pallet Stacker
Mfg: Pasco
Model:Series 5000
Stock No. DTTC2002B.
Serial:
1997 Productive Automated Systems Corporation Pallet Dispenser / Pallet Stacker. Job No: 1306. Capacity: 120 Pallets/hr. Pallet Dispenser Motorized Roller Conveyor, 2-1/2 in. dia. rollers, maximum aperture/clearance above belt: 7 in. W x 3 ft. H, conveyor infeed/exit height: 27 in. Baldor Industrial Motor, 3/4 hp, 1725 rpm, 208-230/460 V, 2.3-2.2/1.1 amps, 60 Hz, 3 phase. Browning Gear Reducer, 40.1 ratio, 43 rpm (final). Pallet Dispenser Motorized Chain Conveyor, maximum aperture/clearance above belt: 44 in. W x 7 in. H. Baldor Industrial Motor, 1/2 hp, 1725 rpm, 230/460 V, 2/1 amps, 60 Hz, 3 phase. Browning Gear Reducer, 30.1 ratio, 57.3 rpm (final). Pallet Dispenser Pneumatic Scissor Lift, base dimensions: 36 in. L x 34 in. H. Pallet Stacker Control Panel with Allen-Bradley SLC 5/04 CPU Controls and Allen-Bradley SLC500 Power Supply. Pallet Stacker aperture/clearance: 6 ft. 4 in. L x 3 ft. 2 in. W x 5 ft. H. The Series 5000 is a stand alone unit that is heavy duty and versatile. This unit is compatible with Girton’s Pallet Washer Model, CW10PS. Overall dimensions (pallet dispenser): 12 ft. 6 in. L x 7 ft. 1 in. W x 3 ft. 7 in. H. Overall dimensions (pallet stacker): 9 ft. L x 5 ft. 8 in. W x 9 ft. 6 in. H.(ACN851).
Graco Drum Pump Station. Model: 206421. S/N: 6C6. Type: President. Ratio: 9-1. Handles barrels: 20 in. dia. Gray Power Head. Model: 20652. S/N: 6B6. Allen-Bradley limit switch. Inlets/outlets: (1) 3/8 in. dia. with rubber hose, (1) 3/8 in. dia. with steel braided flex hose, (1) 3/4 in. dia. MPT, (1) 1 in. dia. ball valve, (1) 1-1/4 in. dia. pipe. Overall dimensions: 44 in. L x 27-1/2 in. W x 64 in. H.
Graco Pneumatic Bulldog Pump. Model: J89C. S/N: W-104. P/N: 947344. Ratio: 3 to 8. Luftmotor Airmotor. Series: F89J. S/N: 208-360. Frame: Series: J89A, S/N: W-102, P/N: 954396SP. Plate dimensions: 18 in. dia. (inner plate), 21-1/2 in. dia. (outer plate). Outlets: (1) 2 in. dia. S-line fitting, (1) 1-3/4 in. dia. FNPT. Overall dimensions: 3 ft. 10 in. L x 2 ft. W x 5 ft. 10 in. H.
Kecol Pumps Ltd. Drum Unloader. Model: 800SSN. S/N: K3272. Job No. 071060. Maxiprime Air Supply Valve. S/N: 7156. MAWP: 150 psi @ 140°F. Follower plate dimensions: 20-1/2 in. dia. (plate), 23 in. dia. (scraper). Inlets: (1) 3 in. dia. port. (suction), (1) 1 in. dia. FNPT. (air) Outlet: (1) 2 in. dia. S-line fitting, (1) 1 in. dia. FNPT (air exhaust). Overall dimensions: 3 ft. 3 in. L x 2 ft. 6 in. W x 4 ft. H.
Graco Senator Air Powered Drum Pump. Model: C96J. S/N: W188. P/N: 948292. Maximum capacity: 13.8 gpm. Maximum air pressure: 100 psig. Ratio: 14 ft. Luftmotor Air Motor, Model: H96B, S/N: W253, P/N: 624250. Graco Base, Model: J96E, S/N: W156, P/N: 947-992. Plate diameter: 20 in. Inlets: (1) 2 in. dia. suction port. Outlets: (1) 1 in. dia. S-line fitting. Overall dimensions: 2 ft. 9 in. L x 1ft. 2 in. W x 7ft. 5-1/2 in. H. RTD
Graco Drum Unloading System. Model: K96A. S/N: W101. Fluid working pressure: 430 psi. Air working pressure: 100 psi. Typical applications: juices, cosmetics, syrups, jams and jellies. Inlets/outlets: (1) 1 in. dia. NPT (male). Overall dimensions: 42 in. L x 24 in. W x 65 in. H.
Hercules Barrel Dumper. Model: HI-110SP-C3396. S/N: D5529. Capacity: 750 pounds. Lesson motor: ¾ hp, 1725 rpm, 115 & 208-230 V, 10.8 & 5.4 FLA, 60 Hz. Container: 22-3/4 in. dia. x 60 in. H. Dumper mechanism: 45 in. H. (4) Casters. Switch on/off. Discharge height is 37 in. when fully tilted. Maximum height of 91 in. Overall dimensions: 53 in. L x 36 in. W x 61 in. H.
2000 Custom Metalcraft Inc. Transtore Tilt Station.
Mfg: Custom Metalcraft Inc
Model:1049800
Stock No. SNSL299.1
Serial: 36567
2000 Custom Metalcraft Inc. Transtore Tilt Station.. Model 1049800. S/N 36567. Tilt is designed for a 42 in. x 48 in. base bin, approximately 50 in. tall. The height can vary however. This machine required a minimum of 80 psi, plant air to operate. You should have control valves on the unit that operate the cylinder for tilting, the automatic door opener, and the piston vibrator. It operates as follows: 1) Put the bin in position. 2) Tilt the unit into the discharge position. 3) Switch on the automatic door opener. 4) Turn on vibrator is product is not flowing. 5) Once empty, turn off vibrator, close door, and tilt back to unload position. Infeed hopper dimensions: 37 in. L x 21 in. W. Inlets: (1) 37 in. L x 7 in. W. Outlets: 5-1/2 in. L x 3-1/2 in. W discharge chute. Overall dimensions: 80 in. L x 60 in. W x 111 in. H.
Regal Roll Lift. Model: MV54, S/N: 83814. Capacity: 750 lbs. Work winch: 1500 lbs first layer; 700 lbs full drum. Platform dimensions: 24 in. L x 24 in. W x 16 in. H. Easily movable on 4 wheels. Overall dimensions: 37 in. L x 24 in. W x 70 in. H.
Stainless Steel Tote Unloader with Elevator. Used in applications where product is in granule or powder form. Tote must have bottom-center discharge. Cycle performed: elevate, position, weigh, unload. Elevates tote a distance of 62 in. from floor level. (4) Fairbanks Sensortronics Load Scales, Model: 65082-1.5K-6002, maximum capacity: 1,500 lbs, Vmin: 0.06, DL min: 30. (2) Baronshire Engineering Pneumatic Actuators, Model: 025 ST, Job No's: 17264 SL and 17111 SL, F diameter: 70 mm, OP Mode: DA, air pressure: 80 psi, one actuator for tote discharge gate, one actuator for butterfly valve discharge. (2) Matara UK Ltd Rodless Cylinders, Typ-Hub: PL00, S/N's: 1949 and 4221, size: 40x1720, diameter: 40 mm. Pneumatic Vibrator. Tri-Clover Bypass Valve. Springride DF 10x2 Airbags. Inlets: (1) 3/4 in. dia. barb fitting (air supply), (1) 2 in. dia. S-line fitting, (1) 10 in. dia. infeed. Outlets: (1) 3/4 in. dia. barb fitting (air supply), (1) 10 in. dia. S-line fitting. Overall dimensions (elevator): 94-1/2 in. L x 66 in. W x 87-1/2 in. H. Overall dimensions (scale): 91 in. L x 73 in. W x 74 in. H.
(4) Graco President 10:1 ratio 55 gallon drum pumps. Model: 206-445 Series “G”. Capacity: 3 gpm max.(60 cycles/min.) Stainless steel wetted parts. Max Air PSI: 180. Fluid to air pressure ratio 10:1. Piston dimensions: 1 in. dia. x 25-1/2 in. L. Luftmotor-air motor, Model: 207-352, S/N’s: J3E, C3E, H3E, J3E. Air Inlet: (1) 1 in. dia FNPT, (1) 1-1/2 in. dia. FNPT (product). Outlet: (1) 1-1/2 in. dia. FNPT (product). Overall dimensions: 3 ft. 7 in. L x 9 in. W x 8 in. H.(ACN26).
Graco, Power Flo Air Powered Pump, Model 2065 96, S/N 71. Ratio 10:1. Overall dimensions: 10 in. W, 10 in. L, 46 in. H. Maximum supply air pressure 120 psi. This pump can handle 1,000 psi fluid pressure, has 3/4 npsm female inlet, 4 in. fluid inlet, 1-1/2 in. npt female fluid outlet. (ACN51)
Graco Monark Pneumatic Pump. Model: 207-549, S/N: K94F. Pump features 3/8 in. dia. air fitting with an open/close valve and air filter. Inlets/outlets: (1)1-1/2 in. dia. suction tube, (1) 1-1/2 in. dia. female ferrule. Overall dimensions: 16 in. L x 6 in. W x 56-1/2 in. H.
Graco Pneumatic Pump - Parts. Monark air motor. Pneumatic regulator inlet & outlet pressure: 150 psig max. Overall dimensions: 37 in. L x 37 in. W x 65 in. H.
Graco Pneumatic Pump - Parts. Monark air motor. Pneumatic regulator inlet & outlet pressure: 150 psig max. Overall dimensions: 37 in. L x 37 in. W x 65 in. H.
Graco Pneumatic Pump- Parts. Monark air motor. Pneumatic regulator inlet & outlet pressure: 150 psig max. Overall dimensions: 37 in. L x 37 in. W x 65 in. H.
Graco President Air Powered Pump. Model: 205378. S/N: 6A2. Stainless steel shaft dimensions: 2-1/2 in. diameter x 39 in. L. Inlet: 1-3/8 in. diameter suction tube. Outlet: 1 in. diameter 'S' line fitting. Applications: texture spraying, adhesive supply, cleaning, airless and air-assisted airless spray finishing. Overall dimensions: 12 in. L x 8 in. W x 62 in. H.
Stainless steel bin dumper, with attached hydraulic unit.
SOLD Murzan Drum Unloading System SOLD
Mfg: Murzan
Model:DUS-50
Stock No. BASF628.23
Serial: 95000 18D
Murzan DUS-50 Gallon Drum Unloading System, Serial 95000 18D, Pump Serial 95082493, 40 cfm max air flow with valve wide open, 103 in L x 54 in W x 74 in H.
SOLD AFC Bin Dump SOLD
Mfg: AFC
Model:
Stock No. 80-SC-0061a
Serial:
AFC bin dump stainless steel, 3500lb capacity, 48 inch x 48 inch with hydraulic power pack.
SOLD
SOLD Hercules Barrel Dump Stainless Steel SOLD
Mfg: Hercules
Model:HI-116-B5696
Stock No. 35-SC-6531
Serial: D4434
The Hercules Industries, Model HI-116-B5696, S/N D4434, capacity 750 lbs, dump height 67 in. Overall dimensions is 62 in. L x 36 in. W x 67 in. H. Platform of barrel is 25 in. W x 66 in. H.
SOLD
SOLD Bin / Barrel Dump #1845 48 in. x 48 in. SS Bin dump 5-1/2 ft. pivot height with chute that seals to top of bin for no spill dumping. Has new air & hydraulic cylinders and controls with hydraulic power pack.
SOLD Tubar Hydraulic Dumping Station Model C-F SOLD
Mfg: Tubar
Model:C-F
Stock No. CCFP061.
Serial: D-8546
Tubar Hydraulic Dumping Station. Capacity 2,500 lbs. Model C-F, S/N D-8546 with 49 in. x 48 in. Platform and Self-Contained Hydraulic System.
SOLD
SOLD Hydraulic Dump Station SOLD
Mfg:
Model:
Stock No. CCFP070.
Serial:
Hydraulic Dump Station with 48 in. x 48 in. Roller Platform and Self-Contained Hydraulic Pump.
SOLD
SOLD Murzan Drum Unloading System SOLD
Mfg: Murzan
Model:DUS-50
Stock No. END300.80a
Serial: 9600026D
Murzan Drum Unloading System, Project No. D-12616, Panel/Equipment DUS-50. S/N 9600026D. Overall dimensions: for drum: 27-½ in.W, 46 in. H. System stands on four lockable casters. Has a control panel on the side with 2 air inlets. 4 control tubes run to the dual air powered pumps, and 2 smaller tubes run to the pneumatic lifts on either side of clearance area. Rollers run along base at 2 in. diameter in open portion and 1 in. Diameter in clearance area. Designed for 24 in. diameter drums. Number on pump: 96102892, P1 .50 SL. Pneumatic Lifts: Rockford Air devices, piston size: 3-¼ in. x 40 in. S/N 96-1396E.
SOLD
Tubar Barrel Dumper. Designed with hydraulic lift to raise standard 55 gallon drum to about 5 ft., then tilts to dump load. Sensor height at 77 in. Baldor motor,1.5 hp, 1725 rpm, 208-220/460 V, 4.2/2.1 amps, 60 Hz, 3 phase. Parker Directional Control Valve, Model: D3W18Y14, 120/110 V, 60/50 Hz, 3000 max psi. Overall dimensions: 91 in. L x 36 in. W. x 84 in. H.
SOLD
Pivot bin dump, 48 inch x 48 inch, mild steel frame 10 foot pivot height.
SOLD
SOLD Murzan Sanitary Pump Model P150-DL SOLD
Mfg: Murzan
Model:P150-DL
Stock No. SBCC01b.18
Serial: 8906646
Murzan PI 50 Sanitary Pump Model P150-DL. S/N 8906646 This pump is the only diaphragm pump specifically designed to meet the special requirements of the sanitary industry. High efficiency oil free air valve, maintenance free ball check system or flap check valve and total visual inspection of all wetted parts, give the user safe and efficient transfer of foods, cosmetics and pharmaceuticals - USDA listed, FDA approved, the PI 50 Series is manufactured to meet general 3-A Standards.
SOLD
SOLD Murzan Drum Unloading System SOLD
Mfg: Murzan
Model:DUS-50
Stock No. END300cb.80a
Serial: 9600026D
Murzan Drum Unloading System, Project No. D-12616, Panel/Equipment DUS-50. S/N 9600026D. Overall dimensions: for drum: 27-½ in.W, 46 in. H. System stands on four lockable casters. Has a control panel on the side with 2 air inlets. 4 control tubes run to the dual air powered pumps, and 2 smaller tubes run to the pneumatic lifts on either side of clearance area. Rollers run along base at 2 in. diameter in open portion and 1 in. Diameter in clearance area. Designed for 24 in. diameter drums. Number on pump: 96102892, P1 .50 SL. Pneumatic Lifts: Rockford Air devices, piston size: 3-¼ in. x 40 in. S/N 96-1396E.
SOLD
Murzan Diaphragm Pump. Model: P150. S/N: 98053518. 304 stainless steel. Diaphragm: 11 in. dia. Inlets/outlets: (2) 2 in. dia. Q-line, (1) 1/2 in. MPT air hose fitting. Overall dimensions: 20 in. L x 18 in. W x 30 in. H. Murzan pumps are used to transfer viscous products, shear sensitive products, solids in a liquid media, and fluid products containing delicate particles such as peach slices, raspberries, cherries, etc.
SOLD
Graco Bulldog Series Hydroclean Pump. Model: 206596, S/N K7C, Air Operated, 10:1 ratio, Max air psi 120 (8 bar), Max GPM: 8.25, LPM (liters per minute): 31, Outlet: 1-1/2 in. Motor Info: Model 203356, S/N J7E. Overall Dimensions: 53 in. H x 34 in. L x 29 in. W.
SOLD
Murzan Diaphragm Pump. Model: P150. S/N: 98053519. 304 stainless steel. Diaphragm: 11 in. dia. Inlets/outlets: (2) 2 in. dia. Q-line, (1) 1/2 in. NPT air hose fitting. Overall dimensions: 20 in. L x 18 in. W x 30 in. H. Murzan pumps are used to transfer viscous products, shear sensitive products, solids in a liquid media, and fluid products containing delicate particles such as peach slices, raspberries, cherries, etc.
SOLD
Murzan Diaphragm Pump. Model: P150. S/N: 93121835. 304 stainless steel. Diaphragm: 11 in. dia. Inlets/outlets: (2) 2 in. dia. Q-line, (1) 1/2 in. NPT air hose fitting. Overall dimensions: 20 in. L x 15 in. W x 24 in. H. Murzan pumps are used to transfer viscous products, shear sensitive products, solids in a liquid media, and fluid products containing delicate particles such as peach slices, raspberries, cherries, etc.
SOLD
Graco Bulldog Powerflo Pneumatic Pump. Model: 207279. S/N: 7C2. Set up for 55-gallon drums. Pneumatic lever control for pump. Delivers up to approximately 8 gpm (31 lpm). Fluid outlet pressures up to 1000 psi (70 bar; 7 KPa). Key applications: fluid transfer and supply. Key materials: peanut butter, cream candy fillings, ricotta cheese, moist pet food. Ideal for materials with high centipoise numbers, which usually require ram pressure to level the product and feed the pump inlet. Inlets: (1) 1/2 in. NPT (female). Outlets: (1) 1-1/2 in. NPT (female). Overall dimensions: 25 in. L x 42 in. W x 61-1/2 in. H.
SOLD
SOLD Graco Bulldog Pneumatic Drum Unloading System SOLD
Mfg: Graco
Model:208-360
Stock No. tCFCF1b.
Serial: A98J
Graco Bulldog Pneumatic Drum Unloading System. Model: 208-360. S/N: A98J. 303 Stainless steel wetted construction. Unloads your typical 55-gallon drums with ease. Capacity: 6 gpm (23 l/min). Air MAWP: 100 psi (0.7 MPa). Fluid MAWP: 1000 psi (7 MPa). The Bulldog Sanitary Priming Piston Pump 10:1 is ideal for materials up to 1,000,000 cps which usually require ram pressure to level the product and feed the pump inlet. Noise is reduced by the installed muffler. Product is dispensed through a flexible sanitary product hose. Two external pneumatic cylinders lift/lower pump onto process. Luftmotor-Airmotor. Inlets: (1) 4 in. dia. suction port. Outlets: (1) 1-1/2 in. dia. product hose. Overall dimensions: 42 in. L x 24 in. W x 74 in. H.
SOLD
Graco Monark Air Powered Pump, Model 205 907, Series B90G, 2.5 gpm, 120 psi, ratio 5:1, 1in. fittings, 26 in. L x 6 in. D.
SOLD
SOLD Mepaco Hydraulic Dumper
Mfg: MEPACO
Model: 519-C
Stock No. SNBB082.13
Serial: 4595
Mepaco Hydraulic Dumper. Model: 519-C, S/N: 4595. Capacity: 1,400 lb. Carriage dimensions: 40-1/2 in. L x 28 in. W x 66 in. H. GS Hydraulic Pack, Mfr. code: 1702. Max pressure: 1,450 psi, R.V. setting: 1,450 psi, 5.3 gpm. Stauff Leeson Motor: 5 hp, 1,750 rpm, 208-230/460 V, 13.8-13 FLA, 60 Hz, 3 phase. Stauff oil filter, Model: SF-6520, 10 micron nominal. Overall dimensions: 70 in. L x 41 in. W x 92 in. H.
SOLD
Tomco2 Hydraulic Tote Dumper. Stainless steel. Inside dimensions: 48 in. L x 45 in. W x 43 in. H. Capable of dumping a 48 in. L x 44 in. W tote/bin. Maximum lift: 100 in. H. Sloping top for easy product removal. Raise/lower controls. Stainless steel frame. Inlets: (1) 45 in. W x 43 in. H opening. Outlets: (1) 6-1/2 in. dia. x 66 in. L product disposal tube, (1) 45 in. L x 8 in. W product chute. Overall dimensions: 91 in. L x 77 in. W x 81 in. H.
Aro Drum Unloading Pump. Model: 650407. S/N: M 700. Inlets: 1 in. dia., 1-1/2 in. dia. S-Line and a 1-1/2 in. dia. S-Line outlet. Overall dimensions: 39 in. L x 24 in. W x 56 in. H.
Bin/Tote Dumper. Maximum size bin dimensions: 48 in. L x 48 in. W x 48 in. H. Infeed height: 44 in. H. Discharge height: 9 ft. Haldek Barnes Corp. Hydraulic Pump, Model: 06-03-99, S/N: 1300074, reservoir tank: 3.6 gal. Leeson Motor, 5 hp, 1740 rpm, 208-230/460 V, 13.4-14.8 amps, 60 Hz, 3 phase. Overall dimensions: 72 in. L x 67 in. W x 9 ft. H.
SOLD 1995 Murzan DUS-50 Drum Unloading System SOLD
Mfg: Murzan
Model:DUS-50
Stock No. HDAF633.5a
Serial: 9500008D
1995 Murzan Drum Unloading System. Model: DUS-50. S/N: 9500008D Pump S/N: 95042360. Project No: D-9891. Inlets: (1) 3/8 in. dia. air fitting. With Capacities up to 60 gpm possible, the DUS-50 is the ultimate solution for emptying the most viscous materials from 55 gallon containers. The DUS-50 Utilizes a 316 stainless steel, sanitary Double-Suction Murzan Diaphragm pump mounted on a food grade plastic base plate and is fitted with a food grade scraper ring which cleans the inside of the container as it is emptied. Outlets: (1) 1 in. dia. exhaust. Overall dimensions: 60 in. L x 57 in. W x 68 in. H. (ACN280).
Tubar Barrel Dumper. Designed with hydraulic lift to raise standard 55 gallon drum to about 5 ft., then tilts to dump load. Sensor height at 77 in. Baldor motor,1.5 hp, 1725 rpm, 208-220/460 V, 4.2/2.1 amps, 60 Hz, 3 phase. Parker Directional Control Valve, Model: D3W18Y14, 120/110 V, 60/50 Hz, 3000 max psi. Maximum working height is 122 in. Overall dimensions: 91 in. L x 36 in. W. x 84 in. H.
Murzan Drum Unloading System. Model: DUS-50. Pump Model: D.U.S. Pump S/N: 96032675. With Capacities up to 60 gpm possible, the DUS-50 is the ultimate solution for emptying the most viscous materials from 55 gallon containers. The DUS-50 Utilizes a 316 stainless steel, sanitary Double-Suction Murzan Diaphragm pump mounted on a food grade plastic base plate and is fitted with a food grade scraper ring which cleans the inside of the container as it is emptied. Drum roller dimensions: 2 ft. 4 in. L x 2 ft. in. W. Follower plate dimensions: 19-1/4 in. dia. (plate), 23 in. dia. (scraper). Inlets: (2) 4 in. dia. suction ports, (1) 3/8 in. dia. (air inlet). Outlets: (1) 4 in. dia. S-line fitting, (1) 1 in. dia. (air exhaust). Overall dimensions: 5 ft. 4 in. L x 4 ft. 7 in. W x 5 ft. 5 in. H.
