Inventory Index  >  Agitators / Blenders / Mixers  >  Agitators  >  Lightnin Mixers

Used Lightnin Fixed-Mount Double-Reduction XL-Series Mixer. Model: XLC 200 E. Serial Number: R9972307400502. XL Mixers allow an increase or decrease in mixer speed as process requirements warrant by changing gears. Dura-Mix energy efficient mixer motor, 2 horse power, 460 V, 1725 rpm, 60Hz, 3 phase. Flange connection: 8 inches ANSI flange with [8] bolt holes. Approximate weight: 295 pounds Overall dimensions: 1 feet 2-1/2 inches length x 1 feet 1-1/2 inches width x 9 feet height. [ACN95]
Stock No: fpe_15.MRD407B.  |   Mfg: Lightnin  |   Model: XLC 200 E  |   S/N: fpe_R9972307400502

Used Lightnin Mixer Fixed-Mount SXJS Side-Entering Mixer. Model: SXJS-174. Serial Number: R04380177-01. Baldor Industrial Motor, 3-1/2 horse power, 1725 rpm, 230/460 V, 9/4.5 amps, 60 Hz, 3 phase. The fixed-mount design of the SXJS side-entering mixer accommodates applications lacking space for top entering mixers and those that require extra-long shafts. Features include motors and shafts coupled directly with pilot and keyway for accurate alignment and positive connections, welded, rigid coupling to add stability on longer shafts and positive chucks to grip the mixer shaft thus preventing unintentional shaft release. Standard on the SXJS are shock mounts that protect the drive against high fluid forces. Overall dimensions: 1 feet length x 11 inches width x 2 feet 11 inches height. [ACN96].
Stock No: fpe_DTTC2041.  |   Mfg: Lightnin  |   Model: SXJS-174  |   S/N: fpe_R04380177-01

Used Lightnin Heavy Duty Agitator Drive. Model: 72-Q-3. Heavy duty top entering agitator features a right angle double reduction spiral bevel and helical gear oil splash lubricated speed reducer, reducer mounting plate, motor mounting bracket and is also equipped with a rigid/rigid mixer shaft coupling. Siemens-Allis Motor, 3 horse power, 1200 rpm, 69 rpm [final], 230/460 V, 60 Hz, 3 phase. Overall dimensions: 42 inches length x 19 inches width x 21 inches height.
Stock No: fpe_25.L65500.1  |   Mfg: Lightnin  |   Model: 72-Q-3  |   S/N: fpe_9054918801

Used Lightnin Mixer Right Angle Heavy Duty Series. Model: 216-TECDS-3.2. SN: 87/584270. 304 Stainless Steel Shaft. WEG motor, 3 horse power, 870 rpm, 230/460 V, 12.0/6.0 amps. 60 Hz, 3 phase. Oil capacity: 6 qts. Gear reducer ratio: 14.0, 125 rpm [final]. Features a right angle design, lubricated speed reducer. Overall dimensions: 3 feet 5 inches length x 1 feet 5 inches width x 4 feet 3 inches height.
Stock No: fpe_HDFD391.  |   Mfg: Lightnin  |   Model: 216-TECDS-3.2  |   S/N: fpe_87/584270

Used Lightnin Heavy Duty Agitator Drive. Model: 93Q5. Heavy duty top entering agitator features a right angle speed reducer. Chuck diameter: 3 inches Shaft dimensions: 1-1/2 inches diameter x 9 inches L. Min. Motor horse power requirement: 5 horse power. ratio: 31.4. Overall dimensions: 3 feet 5 inches length x 1 feet 9 inches width x 1 feet 8 inches H.[ACN144a].
Stock No: fpe_HDBF604.2  |   Mfg: Lightnin  |   Model: 93Q5  |   S/N: fpe_8526616101

Used Lightnin Side Entering Mixer. Model: SG-300. Serial Number: 82/143481-02. Reliance Electric Motor, 3 horse power, 1725 rpm, 230/460 V, 9.0/4.5 amps, 60 Hz, 3 phase. Overall dimensions: 35-1/2 inches length x 13-1/2 inches width x 13-1/2 inches height.
Stock No: fpe_SELM21  |   Mfg: Lightnin  |   Model: SG-300  |   S/N: fpe_82/143481-02

Used Lightnin Mixer. Model: NAG-33. Shaft dia: 5/8 inch. Overall dimensions : 9 inches L x 7 inches W x 1 foot 2-3/4 inches H.
Stock No: fpe_NOI1114  |   Mfg: Lightnin  |   Model: NAG-33  |   S/N: fpe_7715140

Used Lightnin Air Driven Mixer. Model: NAG33. Serial Number: 7715140. Lightnin air-driven mixers are safe for use in flammable or explosive environments. No heat build-up. Motor operates spark free. Speeds can be varied by means of the air control valve. Motor designed to handle stalling overloads without burning out. Lightweight makes for easy handling. Gear driven for maximum output torque. Chuck size: 5/8 inches diameter 1/3 horse power air motor. Inlets/outlets: 3/8 inches fittings. Overall dimensions: 18 inches length x 15 inches width x 15 inches height.
Stock No: fpe_SPPP1424.a  |   Mfg: Lightnin  |   Model: NAG-33  |   S/N: fpe_7715140

Used Lightnin Flange Mount Mixer. Model: 2LBS75YM. Serial Number: 755521. 7/8 inches diameter chuck. Reliance Electric Motor, 3/4 horse power, 1725 rpm, 230 V, 5.9 amps, 60 Hz, single phase. Overall dimensions: 8-1/2 inches length x 8-1/2 inches width x 27 inches height.
Stock No: fpe_SPPP1417.a  |   Mfg: Lightnin  |   Model: 2LBS75YM  |   S/N: fpe_755521

Stock No: fpe_DFLQ004B  |   Mfg: Lightnin  |   Model: ND-2  |   S/N: fpe_7412679

Stock No: fpe_MASH086A  |   Mfg: Lightnin  |   Model: 73-C-15  |   S/N: fpe_732146

Stock No: fpe_MASH045  |   Mfg: Lightnin  |   Model: ND-2A  |   S/N: fpe_723361

Used Lightnin Variable Speed Open Tank Mixer. Model: NS2V. Serial Number: 704852. This Lightnin accessory is your solution for the following applications: changes in viscosity, varying liquid levels, aeration control, pilot plant studies, multiple step operations, reduced speeds during drainage. Positive drive chuck. Maximum propeller shaft diameter: 5/8 inches Lightnin motor: 1/2 horse power, 1,725 rpm, 117/350 rpm [min/max], 230/460 V, 3.2/1.6 amps, 60 cycles, 3 phase. Overall dimensions: 1 feet 5 inches length x 7-1/2 inches width x 2 feet 9 inches height.
Stock No: fpe_22a.GR465.a  |   Mfg: Lightnin  |   Model: NS2V  |   S/N: fpe_704852

Lightnin Top Mounted Agitator. Model: 14-0-1.5. S/N: 690674. 17.3 ratio, 45 output Rpm. Brook Hansen motor: 1.5 Hp, 860 Rpm, 575 V, 2.9 A, 60 Hz, 3 Phase. Shaft size: 1.5 in. Overall dimensions: 2 ft. 1 in. L x 1 ft. 6-1/4 in. W x 2 ft. 2-1/2 in. H.
Stock No: fpe_TMCB151.a  |   Mfg: Lightnin  |   Model: 14-0-1.5  |   S/N: fpe_690674

Used Lightnin Heavy Duty, High Flow Mixer. Model: ND2AEVS. Serial Number: 6622677. Lightnin Motor, 3/4 horse power, 1625 rpm, 230 V, 4.3 amps, 60 Hz, 3 Phase. Overall dimensions: 10-1/2 inches length x 8-1/2 inches width x 24 inches height.
Stock No: fpe_NOI191  |   Mfg: Lightnin  |   Model: ND2AEVS  |   S/N: fpe_6622677

Used Lightnin High Speed Direct Drive Mixer. Model: NS-1. S/N: 661543. High shear. Maximum positive chuck diameter: 1/2 inch. Lightnin Motor, 1/3 hp, 1725/1425 rpm, 208-220/440 v, 1.5/.75 a, 60/50 Hz, 3 phase. Overall dimensions: 9 inches L x 7-1/2 inches W x 1 foot 2 inches H.
Stock No: fpe_OI208  |   Mfg: Lightnin  |   Model: NS-1  |   S/N: fpe_661543

Stock No: fpe_TMCB108B  |   Mfg: Lightnin  |   Model: ND-1  |   S/N: fpe_661149

Stock No: fpe_MASH028  |   Mfg: Lightnin  |   Model: NLD-50  |   S/N: fpe_610602

Used Lightnin Mixer. Model: CV-4. Master Electric Co. motor: ¼ hp, 100-1800 rpm, 115-230 V, 4-2 A, 60 cycles. [1] 4-1/4 inch diameter propeller. Overall dimensions: 3 feet 5 inches L x 7 inches W x 9-3/8 inches H.
Stock No: fpe_MASH029  |   Mfg: Lightnin  |   Model: CV-4  |   S/N: fpe_512419

Used Lightnin Flange Mount Mixer. P/N: 15927. Flange Diameter: 12 inches Seal type: O-Ring. Baldor Industrial Motor, 1.74 horse power, 1725 rpm, 230/460 V, 9/4.5 amps, 60 Hz, 3 phase. Overall dimensions: 12 inches length x 11 inches width x 3 feet
Stock No: fpe_DTTC2042.  |   Mfg: Lightnin  |   Model:   |   S/N: fpe_

Used Lightnin Motor- 3/4 horse power. Model: 5K49KG1012. Motor specifications: 1,725 rpm, 230/460 V, 3.1/1.5 amps, 60 Hz, 3 phase. Overall dimensions: 7 inches length x 6 inches width x 11 inches height.
Stock No: fpe_OI163.  |   Mfg: Lightnin  |   Model: 5K49KG1012  |   S/N: fpe_

Used Lightnin Clamp Mixer. Model: PA. Serial Number: WD3470. Chuck size: 5/8 inches Lightnin Motor, 1725 rpm, 220 V, 4 amps, 60 Hz. Overall dimensions: 10 inches length x 8-1/2 inches width x 24 inches height.
Stock No: fpe_SPPP1408.a  |   Mfg: Lightnin  |   Model: PA  |   S/N: fpe_

Used Lightnin Flange Mount Mixer. Maximum chuck size: 1 inches diameter Motor, 0.43 horse power, 1750/1450 rpm, 208-230/440 V, 1.5-1.4/ 0.7 amps, 60/50 Hz, 3 phase. Overall dimensions: 10 inches length x 10-1/2 inches width x 22-1/2 inches height.
Stock No: fpe_SPPP1413.2a  |   Mfg: Lightnin  |   Model:   |   S/N: fpe_

Used Lightnin Flange Mount Mixer. Model: 33C-25. Serial Number: 576342. Maximum chuck size: 1 inches diameter Lightnin Motor, 1725/1425 rpm, 208-220/440 V, 1/.5 amps, 60/50 Hz, 3 phase. Overall dimensions: 14 inches length x 15 inches width x 33 inches height.
Stock No: fpe_SPPP1447.1a  |   Mfg: Lightnin  |   Model: 33C-25  |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2009 food-processing-equipment.biz - All Rights Reserved.