|
|
|
|
|
|
Used 1997 Minnesota Automation Reciprocating Placer. Model: Special. Serial Number: J582-912. Vacuum style grippers. Air supply: 80 psi-scubic feet per minute. Power supply: 110 VAC, 15 amps, 60 Hz, single phase. Gast Vacuum Pump, Model: 0823-1010-G608X, Serial Number: 9610000381. Overall dimensions: 64 inches length x 50 inches width x 64 inches height.
|
|
Stock No: fpe_SGMT384.a |
Mfg: Minnesota Automation |
Model: Special |
S/N: fpe_J582-912
|
|
|
|
|
|
|
|
|
|
|
|
|
Used ITW Dynatec Adhesive Application System. Model: 52252D2MTC. Serial Number: 95117A2276. Power supply: 240 V/180 DC, 30/7 amps, 60 Hz, 3 phase. Controls Panel, Model: PS-5004-10-016-L 9332/1, power supply: 120 VAC, 50/60 Hz. [2] 2 inches diameter x 127 inches long hoses. [2] General Electric Motors, 1 horse power, 1725 rpm, 180 V, 3.5 amps, 60 Hz, 3 phase. Overall dimensions: 26 inches length x 17 inches width x 66 inches height.
|
|
Stock No: fpe_NPPC101. |
Mfg: ITW Dynatec |
Model: 52252D2MTC |
S/N: fpe_95117A2276
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Culbro Full Body Sleever. Model: Tamp-R-Alert. Serial Number: 45510987027. Boston Gear Motor, 1/2 Hp, 1725 rpm, 208-230/460 V, 2.1-2/1 amps, 60 Hz, 3 phase. Gear Reducer, 30 ratio. Control panel and film cut-off. Roll stock width: 6 inches Superior Electric Slo-Syn Motor. Overall dimensions: 5 feet 2 inches length x 4 feet 7 inches width x 5 feet 5 inches height. [XMR4a].
This piece is being offered and sold as is. It may or may not be complete. Please be sure and look at pictures and ask for additional pictures. Do not rely on original descriptions.
|
|
Stock No: fpe_FPPE097.1 |
Mfg: Culbro |
Model: Tamp-R-Alert |
S/N: fpe_45510987027
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Culbro Full Body Sleever. Model: Tamp-R-Alert. Serial Number: 45510787059. System requirements: 230 V, 9 amps, 60 Hz, 3 phase. [2] 56 inches length 2-piece timing screws. Control panel and film cut-off. Roll stock width: 6 inches Motor with Gear Reducer, 30 ratio. Superior Electric Slo-Syn Motor. Infeed/exit height: 30 inches Overall dimensions: 78 inches length x 68-1/2 inches width x 61 inches H.[h17].
This piece is being offered and sold as is. It may or may not be complete. Please be sure and look at pictures and ask for additional pictures. Do not rely on original descriptions.
|
|
Stock No: fpe_FPPE098.1a |
Mfg: Culbro |
Model: Tamp-R-Alert |
S/N: fpe_45510787059
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_AACA2195.45 |
Mfg: ADCO Manufacturing / Thermo Scientific |
Model: 105WA-170SS / APEX 300 |
S/N: fpe_3239HG / 08062701
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Lord Label Systems Labeler. Model: System 1. Estimated capacity: 60 tags per minute based on a 4 x 6 inches label with a 10 inches stroke. Roller dimensions: 3 inches diameter [core] x 7 inches height. Labeler head Height can be adjusted on a scale from 0 to 36 inches Air ratings: vacuum 20-25 psig, air assist: 25-30 psi, tamp/blow 40-45 psi. Air requirements: 80 to 125 psi at 1.5 to 2 cubic feet per minute. Electrical requirements: 115 VAC. Single-chip microprocessor-based control system with LCD readout provides single-point control. This unit applies pressure sensitive labels onto stationary or moving products in a low to high volume production facility. Overall dimensions: 3 feet 11 inches length x 3 feet 10 inches width x 7 feet 2 inches H.[ACN104a].
|
|
Stock No: fpe_DNBA075 |
Mfg: Lord Label Systems |
Model: System 1 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Ink Coder Stand. Adjustable Height to 4 feet With arm.
|
|
Stock No: fpe_NGSB388.0 |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
