Used 1996 Imeco Side Chamber Ammonia Evaporator

Used 1996 Imeco Side Chamber Ammonia Evaporator. Model: SC 10-44. [2] ¾ hp motors: 575V, 60 Hz, 3 phase. Maximum pressure: 150 PSI. 4 fins per inch. Inlets/outlets: [2] 1 inch, [2] 3 inches, [1] 2 inches threaded. Apollo ball valve. Overall dimensions: 9 feet 8 inches L x 3 feet 7-1/2 inches W x 5 feet 9 inches H.

Used 1991 Imeco Ammonia Evaporator 7.5 Tons

Used 1991 Imeco Ammonia Evaporator 7.5 Tons. Model: SC14-6VF. Serial Number: 8304-2LH. Fin row length 108”. 8 row “vari” coil design [4 rows 4 fins/ inches and 2 rows bare pipe]. Includes hot gas defrost. Inlets: [1] 2 inches diameter port, [2] 1 inches diameter port. Outlets: [1] 2-1/2 inches diameter FNPT port, [1] 1 inches diameter port. Overall dimensions: 11 feet 4 inches length x 2 feet 6 inches width x 3 feet 10 inches H.(H15).

Used Imeco Evaporator – 12.76 Ton.

Used Imeco Evaporator – 12.76 Ton. Model: CO 524-64. Serial Number: 5989. Capacity: 12.76 tons @ 11º temperature difference for a 33ºF room and a 22ºF coil with 20ºF liquid @ 3:1 rate. Airflow: 20,400 CFM @ 0” ESP. [6] coil rows with [4] fins per inch. Coil volume: 4.8 cu. Ft. Surface area: 2,930 square feet [5] 24 inches diameter direct drive prop fans. [5] 1/3 horse power, 1200 rpm fan motors. Set up for bottom feed ammonia with hot gas defrost. A 3.64 psi minimum liquid feed pressure is required above coil suction pressure at the liquid inlet. Overall dimensions: 15 feet length x 3 feet 4 inches width x 3 feet 3 inches height.

Used 1993 Imeco 3-Fan Evaporator – 9.2 Tons

Used 1993 Imeco 3-Fan Evaporator Model: GPX3 40L-8-1110. Rated capacity 9.2 tons using bottom-feed ammonia with a 10°TD in a -20°F room with a -30°F coil. [3] 2 foot diameter fans. Coil: features hot gas defrost and 8 rows of 1 inch diameter tubes with 3 fins per inch. Inlets/outlets: [1] 3 inch NPT, [1] 2 inch drain, [1] 1 inch NPT, [1] ½ inch NPT. Overall dimensions: 12 feet L x 2 feet 7 inches W x 3 feet 4 inches H.