Chemetron Process Votator- 6x48. Model: 2E648A. S/N: 79505v2. Scrapper dimensions: 6 in. L x 2 in. W. Jacketed Tube, Model: 10191, S/N: A3427, shell MAWP @ 375 ° F: 400 psi, jacket MAWP @ 375 °F: 150 psi. Reliance Electric Motor, 7.5 hp, 1,755 rpm, 230/460 V, 21/10.5 amps, 60 hz, 3 phase. Reliance Electric Motor Drive, 20.9 ratio , 83 rpm (final), 5,598 in. lbs torque. Inlets: (1) 1-1/2 in. dia. Q-line fitting (product), (1) 2-1/2 in. dia. (media) 4-bolt square flange with 3/4 in. dia. attachment holes at a center-to-center distance of 5-1/2 in. Outlets: (1) 1-1/2 in. dia. (media) 4-bolt square flange with 1/2 in. dia. attachment holes at a center-to-center distance of 3-1/2 in., (1) 5 in. dia. pipe (product) with a 9 in. dia. flange and (8) 3/4 in. dia. attachment holes at a center-to-center distance of 7-1/2 in. Overall dimensions: 10 ft. L x 27 in. W x 51 in. H.
Cherry-Burrell Extra Heavy Duty Oval Votator 6 x 72
Mfg: Cherry-Burrell
Model:10672L
Stock No. tPPMI001.
Serial: 81153VA
Cherry-Burrell Extra Heavy Duty Oval Votator 6 x 72. Model: 10672L. S/N: 81153VA. Nat'l Bd: 702. 316 Stainless steel construction. Shell MAWP @ 375 °F: 400 psi. Jacket MAWP @ 375 °F: 100 psi. Shaft diameter: 5 in. Scraper dimensions: 6 in. L x 2 in. W. Reliance Electric Motor, 20 hp, 1160 rpm, 230/460 V, 60/40 amps, 60 Hz, 3 phase. Reeves variable speed drive, 14 ratio, output speeds max/min 190/28.6 rpm. Inlets: (1) 1-1/2 in. NPT (female-jacket) , (1) 1-1/2 in. dia. Q-line (product), (2) 1/2 in. dia. male ferrules. Outlets: (1) 1-1/2 in. dia. NPT (female-jacket), (1) 1-1/2 in. dia. Q-line (product discharge), (2) 1/2 in. dia. male ferrules. Overall dimensions: 12 ft. 11 in. L x 22 in. W x 56 in. H. (ACN 543).
1992 APV Scraped Surface Heat Exchanger. Model 6 x 48. S/N: G-8481T648ANNN. Ammonia tank, S/N: 92F1095, National Board #: 8214. MAWP: 150 psi @ 84 °F, MDMT: -35 °F @ 150 psi. Inlet- 3 in., Tank dimensions: 16 in. dia. x 28 in. L. Vanguard motor- 20 hp, 1,735 rpm, 230/460 V, 47.2/23.6 amps, 60 Hz, 3 phase, 2:1 pulley ratio, SEW Eurodrive, 5.82 ratio, torque: 11,100 lb-in. Overall dimensions: 128 in. L x 36 in. W x 81 in. H.
Chemetron Votator. Model: 301876. S/N: 71-040-V. Votator tube dimensions: 4 in. dia. x 24 in. L. Shaft diameter: 1-1/2 in. dia. with 1/4 in. dia. x 3-3/4 in. L pins arranged in a spiral pattern. Louis Allen Motor, 5 hp, 1160 rpm, 230/460 V, 16/8 amps, 60 Hz, 3 phase. Inlets/outlets: (2) 1 in. dia. male ferrules. Overall dimensions: 41 in. L x 21 in. W x 48 in. H.
Cherry Burrell Votator 6 x 24. Model 624DE-L-S, S/N 1172. Inlet: 2 in. Outlet: 2 in. Water circulating inlets/outlets: (2) 1 in. Sprockets: (2) 5 in. MAWP: 400 psi. Maximum temperature: 400 °F. Furnas control box: Catalog No. 14CP32AA71, 200/230 V, 460/575, 3/5 phase, max amps 18. Inside votator dimensions: 6 in. inner dia x 27 in. L. Votator shaft: 24 in. L. Overall dimensions: 67 in. L x 49 in. W x 47 in. H.
Waukesha Cherry-Burrell Votator® 4 x 120 Scraped Surface Heat Exchanger
Mfg: Waukesha Cherry-Burrell
Model:4 x 120
Stock No. TLB02
Serial:
Waukesha Cherry-Burrell Votator® 4 x 120 Scraped Surface Heat Exchanger. 316 Stainless Steel, 3A Approved / PED-SEP Certified. 3 hp motor, 1,760 rpm, 230/460 V, 9/4.5 amps. 10:1 gear ratio produces final shaft rpm of 176. Shaft diameter: 2.375 in. Tube MAWP: 200psi. @ 365°F, hydro test: 300psi. Jacket MAWP: 150psi. @ 365°F, hydro test: 225psi. Grove Gear Speed Reducer, 10:1 gear ratio. Suitable for steam or liquid media, the patented Votator® 4 x 120 is designed to deliver efficient performance for lower initial investment, and lower maintenance costs. The Votator® 4 x 120 is a unique, concentric, scraped surface heat exchanger designed for heating and cooling moderately viscous products including those with particulates up to 0.75 inches. Other features include: mechanical seal with flush connection on drive end with sleeve bearing on non-driven end, plastic scraper blades and a self-aligning mutator shaft requiring no motor coupling, belts or sheaves. Units can be mounted side by side with up to 8 cylinders per frame or furnished loose for vertical mounting. Inlets: (1) 2 in. dia. flanged steam port, (1) 2 in. dia. S-line fitting. Outlets: (1) 1 in. dia. flanged steam port, (1) 2 in. dia. S-line fitting. Overall dimensions: 11 ft. 6 in. L x 1 ft. 6 in. W. x 4 ft 8 in. H.
Chemetron Votator Scraped Surface Heat Exchangers. Model LS918B. S/N 82046VA. First tube left top to bottom: S/N A3939, Nat Brd no. 785. 2nd tube, right top: S/N A3940, Nat Brd no. 786. 3rd tube, bottom center: S/N B-677, Nat Brd No. B0677. (2) Stainless steel chrome plated barrels 6 in. diameter x 72 in. L, (1) barrel measuring 6 in. diaameter x 48 in. L, rating: 400 psi at 375 °F, jacketed for 150 psi. Individual dimensions 15 in. W x 72 in. L.
Waukesha Cherry-Burrell - Girdler 6 x 48 Votator. S/N: A496. Nat'l Bd: 1133. Stainless steel with 316 stainless steel shaft. Completely refurbished. Inside dimensions: 6 in. dia. x 48 in. L. Eccentric shaft is offset by 1/4 in. Inner shell MAWP: 400 psi @ 400 °F. Jacket MAWP: 150 psi @ 400 °F. Inlet/outlet temperatures: 117/75 °F. Flow rate: 50 gpm (max). Shell thickness: 0.230 in. Jacket thickness: 0.250 in. Scrapers: 6 in. L x 2 in. W; 4-11/16 in. dia. shaft. Baldor Industrial Motor, 20 hp, 1760 rpm, 230/460 V, 50/25 amps, 60 Hz, 3 phase. Foote Bros. Motor Drive. S/N: 2W-85732, 0.59 gear ratio, 38.8 AGMA hp, 1,750 rpm (input), 230 rpm (output). Inlets: (1) 1-1/2 in. dia. media port with 5 in. dia. flange and (4) 5/8 in. dia. attachment holes at a center-to-center distance of 2-3/4 in., (1) 2 in. dia. S-line fitting (product). Outlets: (1) 1-1/2 in. dia. media port with a 5 in. dia. flange and (4) 5/8 in. dia. attachment holes at a center-to-center distance of 2-3/4 in., (1) 2 in. dia. S-line fitting (product). Overall dimensions: 120 in. L x 20-1/2 in. W x 54 in. H.
Chemetron Votator Heat Exchanger 6 x 72. S/N: A2744. Nat'l Bd: 4309. Shell side MAWP: 400 psi at 375 °F. Jacket side MAWP: 150 psi at 375 °F. Rotor uses (24) 6 in. L x 2 in. W graphite scrapers. Cone Drive Gear Motor, 7.5 hp, 1760 rpm, 220/440 V, 21.2/10.6 amps, 60 cycles, 3 phase. Cone Drive Motor Drive, ratio: 7.5 to 1, final rpm: 234.66. The Votator's heat transfer tube provides the necessary thermal conductivity to handle highly viscous products. Tube wall thickness is precisely engineered to minimize heat transfer resistance while maximizing structural stability. Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products. Unit is equipped with a pneumatic steam valve and steam trap. Inlets: (1) 1 in. dia. NPT (female), (1) 2 in. 'I' line fitting. Outlets: (1) 1 in. dia. NPT (female), (1) 2 in. 'I' line fitting. Overall dimensions: 106 in. L x 27-1/2 in. W x 69 in. H.
Cherry-Burrell Votator Scraped Surface Heat Exchanger- 6 x 72
Mfg: Cherry-Burrell
Model:2C672WA
Stock No. DFPC373.37
Serial: 68-072-2
Cherry-Burrell Votator Scraped Surface Heat Exchanger - 6 x 72. Model: 2C672WA. S/N:68-072-2. Concentric shaft and barrel. These units were originally configured to use 150 GPM of 75°F water in the jacket of one heat exchanger and 16 tons Direct Expansion Ammonia in the jacket of the other heat exchanger. Contact surface area: 9.0 sq. ft. Votator scraped surface heat exchangers are designed for up to 400 psig @ 375°F product side, and 150 psig @ 375°F jacket side. Pacemaker Motor, 15 hp, 1180 rpm, 413 final rpm, 230/460 V, 41.2/20.6 amps, 60 Hz, 3 phase. The Votator's heat transfer tube provides the necessary thermal conductivity to handle highly viscous products. Tube wall thickness is precisely engineered to minimize heat transfer resistance while maximizing structural stability. Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products. Partlow meter. General Electric Percent of Motor Load Current meter. Inlets: (1) 2 in. port, (1) 1-1/2 threaded port. Outlets: (1) 2 in. port, (1)1-1/2 in. threaded port, (1) 1-1/2 in. S-Line, (1) 1-1/2 in. threaded port, 1/2 in. threaded port. Overall dimensions: 9ft. 5 in. L x 4ft. 4in. W x 6ft. 6in. H. (ACN900-68). FAD
Cherry Burell Votator Scraped Surface Heat Exchanger- 6 x 72
Mfg: Cherry Burrell
Model:2C672WA
Stock No. DFPC374.37
Serial: 68-072-3
Cherry-Burrell Votator Scraped Surface Heat Exchanger- 6 x 72. Model: 2C672WA. S/N:68-072-3. Concentric shaft and barrel. Contact surface area: 9.0 sq. ft. Votator scraped surface heat exchangers are designed for up to 400 psig @ 375°F product side, and 150 psig @ 375°F jacket side. Pacemaker Motor, 15 hp, 1180 rpm, 413 final rpm, 230/460 V, 41.2/20.6 amps, 60 Hz, 3 phase. The Votator's heat transfer tube provides the necessary thermal conductivity to handle highly viscous products. Tube wall thickness is precisely engineered to minimize heat transfer resistance while maximizing structural stability. Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products. Inlets: (1) 2 in. port, (1) 1-1/2 threaded port. Outlets: (1) 2 in. port, (1)1-1/2 in. threaded port, (1) 1-1/2 in. S-Line, (1) 1-1/2 in. threaded port, 1/2 in. threaded port. Overall dimensions: 116 in. L x 50 in. W x 86 in. H.
Cherry Burell Votator Scraped Surface Heat Exchanger- 6 x 72
Mfg: Cherry Burrell
Model:2C672WA
Stock No. DFPC375.43
Serial: 68-072-1
Cherry-Burrell Votator Scraped Surface Heat Exchanger- 6 x 72. Model: 2C672WA. S/N:68-072-1. Concentric shaft and barrel. Contact surface area: 9.0 sq. ft. Votator scraped surface heat exchangers are designed for up to 400 psig @ 375°F product side, and 150 psig @ 375°F jacket side. Pacemaker Motor, 15 hp, 1180 rpm, 413 final rpm, 230/460 V, 41.2/20.6 amps, 60 Hz, 3 phase. The Votator's heat transfer tube provides the necessary thermal conductivity to handle highly viscous products. Tube wall thickness is precisely engineered to minimize heat transfer resistance while maximizing structural stability. Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products. Inlets: (1) 2 in. port, (1) 1-1/2 threaded port. Outlets: (1) 2 in. port, (1)1-1/2 in. threaded port, (1) 1-1/2 in. S-Line, (1) 1-1/2 in. threaded port, 1/2 in. threaded port. Overall dimensions: 116 in. L x 50 in. W x 86 in. H.
Cherry-Burrell Scraped Surface Heat Exchanger- 6 x 72
Mfg: Cherry-Burrell
Model:
Stock No. DFPC435.37
Serial: A4663
Cherry-Burrell Scraped Surface Heat Exchanger- 6 x 72. S/N: A4663. 3A, ASME, and PED Certified. Contact surface area: 9 ft. sq. Shell MAWP: 400 psi @ 375 °F. Shell MDMT: -20 °F @ 400 psi. Jacket MAWP: 150 psi @ 375 °F. Jacket MDMT: -20 °F @ 150 psi. (24) 6 in. W x 2 in. H scraper blades. Baldor Super E Motor, 20 hp, 1725 rpm, 230/460 V, 48/24 amps, 3 phase, 60 Hz. Typical applications are heating and cooling cheese sauce, pudding, caramel, deboned meat, pet food, and fruit products. Inlets: (1) 2-1/2 in. dia port (ammonia), (1) 1-1/2 in. dia port. Outlets: (2) 1 in. dia. Acme pressure relief ports, (1) 2-1/2 in dia S-Line port, (1) 1/2 in. outlet dia port. Overall dimensions: 12 ft. L x 33 in. W x 20 in. H.
Alfa Laval Contherm Scraped Surface Heat Exchanger
Mfg: Alfa Laval
Model:6x9
Stock No. DFPC469.67
Serial: HC6273NPC
Alfa Laval Contherm Scraped Surface Heat Exchanger. Model: 6 x 9. S/N: HC6273NPC. Product side MAWP: 300 PSI @ 300 °F. Media side MAWP: 250 PSI @ 300 °F. MDMT: -30 °F @ 100 PSI. Concentric shafts with (6) 24 in. L x 1-1/2 in. W scrapers. (2) Lincoln A.C. Motors, 7-1/2 hp, 1165 rpm, 376 rpm (final), 230/460 V, 22/11 amps, 60 Hz, 3 phase. Inlets: (2) 2 in. dia. I-line fittings. Outlet: (2) 2 in. S-line for ammonia. Overall dimensions: 88 in. L x 60 in. W x 68 in. H.
Cherry-Burrell Chemetron Votator Scraped Surface Heat Exchanger- 6 x 72. Surface area is 9.0 ft. Designed for up to: 400 PSIG @ 375 °F product side and 150 PSIG @ 375 °F jacket side. Motor, 15 hp, 1180 rpm, 413 rpm (final), 230/460 V, 60 Hz, 3 phase. Votator scraped surface heat exchangers can process virtually any pumpable fluid or slurry: they can cook, heat, cool, slush freeze, pasteurize, sterilize, aerate, mix, extrude, crystallize, gel, plasticize, emulsify, or polymerize. The design consists of a concentric shaft with (24) standard 6 in. L x 1-1/2 in. W floating blades. Partlow controller. Inlets: (2) 2 in. S-Line fitting (product), (2) 2 in. threaded port (male, media). Outlets: (2) 1-1/2 S-Line fittings (product), (2) 2 in. threaded port (male, media). Overall dimensions: 9 in. L x 48-1/2 in. W x 68 in. H.
APV Dual Tube Cooker. Upper/lower tube dimensions: 7-1/2 in. dia. x 84 in. L. Auger screw diameter: 7 in. Upper tube motor and gear drive: Baldor Industrial Motor, 1 hp, 1,725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Sterling Electric Speed-Trol Variable Speed Drive, 4200 rpm (max), 700 rpm (min). Lower tube motor and gear drive: Baldor Super-E Motor, 1-1/2 hp, 1,740 rpm, 230/460 V, 4/2 amps, 60 Hz, 3 phase. Nord Motor Drive, 112.23 ratio, 16 rpm (final). Inlets: (1) 15-3/4 in. L x 15 in. W infeed hopper, (1) 4 in. dia. Q-line fitting. Outlets: (1) 3 in. dia. Q-line fitting. Overall dimensions: 12 ft. L x 55 in. W x 64 in. H.
Cherry-Burrell Thermutator Swept Surface Heat Exchanger- 6 in. x 72 in.
Mfg: Cherry-Burrell
Model:6x72
Stock No. FPPE079.12a
Serial: 400
Cherry-Burrell Thermutator Swept Surface Heat Exchanger- 6 in. x 72 in. Model: 6x72. S/N: 400. Heat transfer surface area: 9.0 sq. ft. (0.84 sq. m). Concentric shaft mounted over a chrome-plated-nickel heat transfer tube. MAWP tube side: 600 psi (42 bar) @ 400 °F (204 °C). MAWP shell side: 250 psi (17.5 bar) @ 400 °F (204 °C). Lincoln Motor, 10 hp, 1745 rpm, 230/460 V, 26/12 amps, 60 Hz, 3 phase. Inlets: (1) 1-1/4 in. dia. port with a 3-3/4 in. x 3-3/4 in. square flange and (4) 3/4 in. dia. attachment holes at a center-to-center distance of 2-1/2 in., (1) 1-1/2 in. dia. S-line fitting. Outlets: (1) 3/4 in. dia. pipe, (1) 1-1/2 in. dia. S-line fitting. Overall dimensions: 12 ft. 7 in. L x 47 in. W x 65 in. H.
Crepaco Rota-Pro Swept Surface Heat Exchanger. S/N: C-7850 (2HD672). Order No: 39-36378. Dwg. No: 12B-P-385695. Heating surface area: 18 ft. sq. Standard ASME cylinder jackets are provided for heating with water or steam media up to 450 °F or cooling with water, brine, glycol or other suitable liquid media. Inner cylinder dimensions: 6 in. dia x 71 in. L. Inner cylinder: chrome plated finish over a nickle barrel. (36) Scraper blades: 7-3/4 in. L x 3/4 in.W. Rotating dashers, with fixed scraper blades, continuously sweep the cylinder surface clean of product, simultaneously producing a highly desirable level of product mixing and agitation contributing to consistency in final product identity. Reliance Electric Motor, 15 hp, 1760 rpm, 230/460 V, 40-20 amps, 60 Hz, 3 phase. Inlets: (2) 1-1/2 in. dia. threaded fittings, (1) 2 in. dia. media port with a 5 in. L x 5 in. W square flange that has (4) 5/8 in. dia. attachment holes at a center-to-center distance of 3 in. Outlets: (2) 1-1/2 in. dia. threaded fittings, (1) 2 in. dia. media port with a 5 in. L x 5 in. W square flange that has (4) 5/8 in. dia. attachment holes at a center-to-center distance of 3 in. Overall dimensions: 9 ft. 4 in. L x 44 in. W x 72-1/2 in. H.
Creamery Package Rota-Pro Swept Surface Heat Exchanger. S/N: HP-2-125-S. Heating surface area: 9.5 ft. sq/cylinder. Glycol-cooled. Standard ASME cylinder jackets are provided for heating with water or steam media up to 450 °F or cooling with water, brine, glycol or other suitable liquid media. Inner cylinder dimensions: 6 in. dia x 48 in. L. Chrome plated nickle barrel. Rotating dashers, with fixed scraper blades, continuously sweep the cylinder surface clean of product, simultaneously producing a highly desirable level of product mixing and agitation contributing to consistency in final product identity. Louis Allis Motor, 15 hp, 1770 rpm, 440 V, 20 amps, 60 Hz, 3 phase. Inlets: (2) 2-1/2 in. dia. threaded fittings, (1) 1-1/2 in. dia. bevel with hex nut (media). Outlets: (2) 2 in. dia. threaded fittings, (1) 1-1/2 in. dia. media port. Overall dimensions: 88 in. L x 51 in. W x 65 in. H.
APV Crepaco Stainless Steel Scraped Surface Heat Exchanger. S/N: HP-1-264-S. Jacketed cylinder: 6 in. diameter x 48 in. L. Rotating dasher. The product is pumped through the cylinder while the heating or cooling medium is circulated between the cylinder and the jacket. The machine is able to heat and cool fluids with particulates up to 1 in. (25.4 mm) and able to heat and cool high viscosity fluids. Reliance Electric Motor, 5 hp, 1155 rpm, 220/440 V, 15.2/7.6 amps, 60 cycles, 3 phase. Product inlet/outlet: 1-1/2 in. 'S' line. Overall dimensions: 87 in. L x 24-1/2 in. W x 49 in. H.
AVP Crepaco Scrape Surface Heat Exchanger. S/N: 88J1474. Nat’l Bd: 7232. MAWP: 150 psi @ 650°F. MDMT: 150 psi @ -20 °F. Sew-Eurodrive Motor, 10 hp, 490/1980 rpm, 230/460 V, 26/12 amps, 60 Hz, 3 phase. Sew-Eurodrive Variable Speed Drive, 5 and 14 Ratio, 1410 lb/in, 490 and 1960 input rpm, 95 and 380 output rpm. APV scraped surface heat exchangers (SSHE) consist of a jacketed cylinder with a rotating dasher holding rows of scraper blades. The product is pumped through the cylinder while the heating or cooling medium is circulated between the cylinder and the jacket. The medium can be steam, water or a refrigerant such as ammonia or freon. Uses (4) 5 in. casters for easy maneuverability and has 1 in. ground clearance. Inlet: (1) 1-1/2 in. dia. S-line fitting (product), (2) 2-1/2 in. dia. FNPT (media). Outlets: (2) 1/4 in. dia. FNPT (relief), (1) 1-1/2 in. S-Line fitting (product), (2) 2-1/2 in. dia. FNPT (media). Overall dimensions: 11 ft. 8 in. L x 42 in. W x 24 in. H.
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12
Mfg: Votator
Model:XTW
Stock No. RFPM324.2a
Serial: 7709
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12. Model: XTW. S/N: 7709. 316 stainless steel. Chamber dimensions: 3 in. diameter x 12 in. L. Concentric shaft: 2-1/4 in. diameter x 12 in. L. (2) Bakelite scrapers: 12 in L x 1 in. W. Motor, 2 hp, 1800 rpm, 60 cycles, 3 phase. Lima Electric 4-Speed Gear Drive. Inlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 3/4 in. NPT (female, product). Outlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 3/4 in. dia. NPT (female). Overall dimensions: 52 in. L x 15 in. W x 25 in. H.
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12
Mfg: Votator
Model:X-I-D
Stock No. RFPM479.1
Serial: 66710
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12. Model: X1D. S/N: 66710. Tube chamber dimensions: 3 in. diameter x 12 in. L. Concentric shaft: 1-3/4 in. diameter x 12 in. L. (2) Bakelite scrapers: 12 in. L x 1 in. W. U.S. Motor, 2 hp, 1800 rpm, 230/460 V, 7.2/3.6 amps, 60 cycles. U.S. Varidrive Module, maximum speed: 1030 rpm, minimum speed: 103 rpm. Inlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 1 in. diameter threaded (male). Outlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 3/4 in. diameter threaded (female). Overall dimensions: 55 in. L x 18 in. W x 40 in. H.
Paddle Blender. Paddle size: 2 in. L x 2 in. W. (3) 80 in. L x 2-3/4 in. W side scrapers blades. (3) 19-1/2 in. L x 11 in. W access doors. Reliance Electric Motor, 10 hp, 1755 rpm, 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Foote-Jones Powertech Gear Drive, 40 rpm (final). Inlets: (1) 3/4 in. dia. NPT (jacket), (1) 9-1/2 in. dia. infeed with a 13-1/2 in. dia. flange. Outlets: (1) 3/4 in. dia. NPT (jacket), (1) 10 in. L x 9 in. W discharge. Overall dimensions: 10 ft. 10-1/2 in. L x 32 in. W x 36 in. H.
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12
Mfg: Votator
Model:X-I-D
Stock No. RFPM478.1
Serial: 303
Votator Stainless Steel Scrape Surface Heat Exchanger 3 x 12. Model: X1D. S/N: L303. Tube chamber dimensions: 3 in. diameter x 12 in. L. Concentric shaft: 1-3/4 in. diameter x 12 in. L. (2) Bakelite scrapers: 12 in. L x 1 in. W. U.S. Motor with Varidrive Module. Inlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 3/4 in. diameter threaded (male). Outlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 3 in. diameter threaded (female). Overall dimensions: 52 in. L x 24 in. W x 35 in. H.
Votator Scrape Surface Heat Exchanger 3 x 12. Model: X1-W. S/N: 62383. Chamber dimensions: 3 in. diameter x 12 in. L. Scraper shaft: 2-1/4 in. diameter x 11-3/4 in. L. (2) 11-3/4 in L x 1 in. W bakelite scrapers. U.S. Varidrive Speed Motor, 2 hp, 1200 rpm, 220/440 V, 8.5/4.25 amps, 60 cycles, 3 phase, maximum speed: 1170 rpm, minimum speed: 242 rpm. Product inlet: (1) 3/4 in. threaded (male, jacket), 1-1/2 in. threaded (male). Product outlet: (1) 3/4 in. threaded (male, jacket), (1) 1-1/2 threaded (male). Overall dimensions: 52 in. L x 24 in. W x 36 in. H.
Votator Agitated Holding Unit. Shaft dimensions: 4 in. dia. x 16 in. L. Consists of a tube, in which a shaft with agitating pins revolves at a fixed speed; the unit prevents margarine from "setting," so it can deliver the soft product to tubs or bulk containers. U.S. Motor, 1/2 hp, 1720 rpm, 208-220/410 V, 2.75-2.6/1.3 amps, 60 Hz, 3 phase. U.S. Varidrive Module, 190 rpm (min), 1900 rpm (max). Inlets/outlets: (2) 1/2 in. dia. MPT. Overall dimensions: 47 in. L x 17-1/2 in. W x 29-1/2 in. H.
Alfa Laval Contherm 2-Barrel Scrape Surface Heat Exchanger
Mfg: Alfa Laval
Model:6X9
Stock No. EECA002.
Serial: C1041NPC
Alfa Laval Contherm 2-Barrel Scrape Surface Heat Exchanger. Model: 6x9. S/N: C1041NPC. Uses (14) 10-1/2 in. L x 1-5/8 in. W staggered scraper blades per rotor. Goulds Century Motor, 20 hp, 1160 rpm, 230/460 V, 56/28 amps, 60 Hz, 3phase. Reliance Electric Motor. The horizontally-mounted Alfa Laval Contherm is a scraped surface heat exchanger consisting of a heat transfer cylinder and a rotor with attached scraping blades. The product is pumped into the lower end of the Contherm heat exchange cylinder. As it flows through the cylinder, it is continuously removed from the cylinder's precisely finished walls by the scraping blades. Each rotor will turn at a final speed of 255 rpm. Inlets: (2) 1-1/2 in flanged fittings (media), (2) 2 in. dia. S-line fittings. Outlets: (2) 1-1/2 in flanged fittings (media), (2) 2 in. dia. S-line fittings. Overall dimensions: 89 in. L x 65 in. W x 72 in. H. (ACN350-79).
DeLaval Contherm Vertical Scraped Surface Heat Exchanger. Model: 6x9 HC-NCC. S/N: HC2688NCC. Hydraulic rotor lift system less power unit. Stainless steel cast product heads. Nickel hard chrome plated cylinder. Coiled media annulus. 7-1/2 Hp V-belt drive. Product rating 450 Psi @ 315 °C. Media Rating 225 psi @ 315 °C.
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS676.50
Serial: HC2695NCC
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: HC2695NCC. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS677.50
Serial: HC2617NCC
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: HC2617NCC. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS678.50
Serial: HC2618NCC
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: HC2618NCC. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS679.50
Serial: HC2682NCC
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: HC2682NCC. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS680.50
Serial: HC2683NCC
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: HC2683NCC. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
DeLaval Contherm® Scraped-Surface Heat Exchanger
Mfg: DeLaval
Model:6x9 HC-NCC
Stock No. pWNDS681.50
Serial:
DeLaval Contherm® Scraped-Surface Heat Exchanger. Model: 6 x 9 HC-NCC. S/N: Unknown. Designed to be used with flooded refrigerant (i.e. Freon or ammonia), these Contherm® scraped-surface heat exchangers feature: chrome plated, nickel cylinders, stainless steel cast product heads and a coiled media annulus. With working temperature ranges of: - 30°F to + 300°F and a maximum working pressure of: 300 psig (20 bar) product side and 250 psig (17 bar) media side, they are specifically configured to provide efficient and gentle treatment of varieties of shear-sensitive products or particulates by placing products under varied shear for mechanical mixing and scraping. Although specifically designed for the food industry, the Contherm® is designed to meet the strictest of sanitary standards and is widely used for aseptic processing applications, also having CIP capability. With the options of being mounted horizontally or vertically, it is ideal for heating or cooling particulate, sticky, viscous and crystallizing / phase-change processes. Overall dimensions: 15ft. 11-1/2 in. L x 2 ft. 10 in. W x 3 ft. 1 in. H.(ACN500).
SOLD Votator SOLD
Mfg:
Model:
Stock No. 120
Serial:
Mfg. 1991 S/N A5154 Model 4SSHE S/N 92242HA.
SOLD
SOLD 1990 Votator 4x120 SOLD
Mfg:
Model:4SSHE
Stock No. 110.GR606
Serial: A5095
1990 Votator 4x120 Model 4SSHE, S/N A5095, Stainless Steel scraped surface heat exchanger for hot/chilled.
water heating/cooling medium. Shell mawp 200 psi at 365 F, Tube mawp 150 psi at 365 F, 3 hp 208-230/460 volts 1,725 rpm, Ratio 10.
SOLD
SOLD 1991 Votator 4x120 SOLD
Mfg:
Model:4SSHE
Stock No. 110.GR306
Serial: A5156
1991 Votator 4x120 Model 4SSHE, S/N A5156, Stainless Steel scraped surface heat exchanger for hot/chilled.
SOLD
water heating/cooling medium. Shell mawp 200 psi at 365 F, Tube mawp 150 psi at 365 F, 3 hp 208-230/460 volts 1,725 rpm, Ratio 10.
SOLD 1990 Votator 4x120 SOLD
Mfg:
Model:4SSHE
Stock No. 110.GR406
Serial: A5101
1990 Votator 4x120 Model 4SSHE, S/N A5101, Stainless Steel scraped surface heat exchanger for hot/chilled.
SOLD
water heating/cooling medium. Shell mawp 200 psi at 365 F, Tube mawp 150 psi at 365 F, 3 hp 208-230/460 volts 1,725 rpm, Ratio 10.
SOLD 1990 Votator 4x120 SOLD
Mfg:
Model:4SSHE
Stock No. 110.GR506
Serial: A5097
1990 Votator 4x120 Model 4SSHE, S/N A5097, Stainless Steel scraped surface heat exchanger for hot/chilled.
SOLD
water heating/cooling medium. Shell mawp 200 psi at 365 F, Tube mawp 150 psi at 365 F, 3 hp 208-230/460 volts 1,725 rpm, Ratio 10.
SOLD 1990 Votator 4x120 SOLD
Mfg:
Model:4SSHE
Stock No. 110.GR706
Serial: A5100
1990 Votator 4x120 Model 4SSHE, S/N A5100, Stainless Steel scraped surface heat exchanger for hot/chilled.
water heating/cooling medium. Shell mawp 200 psi at 365 F, Tube mawp 150 psi at 365 F, 3 hp 208-230/460 volts 1,725 rpm, Ratio 10.
SOLD
SOLD Cherry Burrell Thermutator Stainless Steel SOLD
Mfg: Cherry Burrell
Model:648
Stock No. 60.1R-605.5
Serial: 37
Cherry Burrel thermutator stainless steel, triple barrel, model 648, serial no. 37, 111 in. Long x 60 in. Wide x 72 in. High.
SOLD
SOLD USF 6 X 72 Votator
Mfg: USF
Model:GSSHE
Stock No. 125.BASF368.4a
Serial: 89330HA
SOLD USF 6 X 72 Votator, model GSSHE, serial 89330HA, Manuf. Serial A49771, 1990, mawp shell side 400 psi at 375F to -20F tube side 150 psi at 375F to -20F, Votator 4 - 1/2 in Diameter x 8 ft L, Barrel 14 in Diameter x 70 in L, overall 12 ft L x 27 in W x 48 in H, 2 in connections.
SOLD
SOLD Votator 4 X 120 Scrape Surface Heat Exchanger SOLD
Mfg: Waukesha Cherry-Burrell
Model:
Stock No. 400.GR454
Serial:
Waukesha Cherry-Burrell Votator 4 X 120 scrape surface heat exchanger.
316 stainless steel, .083 stainless steel heat transfer tube, suitable for steam or liquid media, 3 and 5 hp (2.2 kw - 5.5 kw) gear drives with shaft speeds of 90 and 175 rpm. Product side pressure of 200 psi (14 bar) @ 365?ㆠ(185?ラ jacket pressure of 150 psi (10.5 bar) @ 365?ㆠ(185?ラ. 2.375 inch (60 mm) shaft diameter for particulates up to 0.75 inches (19 mm), 2 inch "S"-line product connections, 1-1/2 FPT media connections
2 barrels are setup to chill with liquid ammonia (can run glycol instead) 3 barrels are setup for liquid or steam.
SOLD
SOLD Waukesha Cherry Burrell Votator 4 x 120 Scraped Su SOLD
Mfg: Cherry Burrell
Model:
Stock No. 90.LOL342.20
Serial: 4SSHE-95051hc
Waukesha Cherry Burrell Votator 4 x 120 scrape surface heat exchanger system, serial no. 4SSHE-95051hc, stainless steel rack with (8) 4 inch x 120 inch scrape surface heat.
SOLD
SOLD 1997 Alfa Laval Stainless Steel Jacketed Contherm Barrel SOLD
Mfg: Alfa Laval
Model:6 x 9
Stock No. DBPF096.5
Serial: 6288NCN
1997 Alfa Laval Stainless Steel Jacketed Contherm Barrel. Model 6 x 9. S/N: 6288NCN. Product Chamber: Maximum Working Pressure: 300 psi @ 300°F. Media Chamber: Maximum Working Pressure: 250 psi @ 300°F, Minimum Design Metal Temperature: -30°F @ 100 psi. Overall Dimensions 72 in. L x 10 in. Diameter.
SOLD
SOLD Stainless Steel Blade for Contherm SOLD
Mfg:
Model:
Stock No. DBPF095.5
Serial: 5345
Stainless Steel Blade for Contherm. S/N 5345, Max Working Pressure: 280 psi @ 600°F, Min Design Metal Temperature: -30°F @ 280 psi. Overall Dimensions: 4-1/2 in. Diameter x 86 in. L.
SOLD
SOLD Votators SOLD
Mfg:
Model:
Stock No. 311
Serial: A5556 and A5784
Votators (two), 2in inlets, serial no.'s A5556 and A5784, yr 1994 and 1995, shell 200psi jacket 150psi at 365F, motor 3hp 230-460 350 final rpm, 145in L x 27in W x 37in H.
SOLD
