|
|
|
|
|
|
Used Griffith Mince Master Grinder. Model C: Electrical requirements: 28 HP, 3450 rpm, 220/440V, 85/42-1/2 amp, 60 Hz, 3 phase. Overall dimensions: 4 feet L x 3 feet 3 inches W x 5 feet 1 inch H.(h17).
|
|
Stock No: fpe_AACA2093.12 |
Mfg: Griffith laboratories, Inc. |
Model: C |
S/N: fpe_S16512
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Bunn-O-Matic Precision Grinder. Model: G-9. S/N: 17818. 120 V, 9.4 A, 60 Hz, 1 Phase, 2200 Watts. Top lid product entrance: 10-5/8 inches L x 7-5/8 inches W. [1] 1-1/8 inch diameter effective inlet port. [1] 1-7/8 inch x 1 inch rectangular outlet. Overall dimensions: 1 foot 6 inches L x 8-1/4 inches W x 1 foot 10-1/2 inches H.
|
|
Stock No: fpe_TACJ0175.1 |
Mfg: Bunn-O-Matic Corporation |
Model: G-9 |
S/N: fpe_17818
|
|
|
|
|
|
|
|
|
|
|
|
|
Used AEC Nelmor Co Inc. Grinder. Grinder is equipped with a 4-sprayer spray bridge. Infeed height: 74 inches Mounted on a stainless steel frame. Lincoln AC Motor, 30 horse power, 1760 rpm, 90 rpm [final], 230/460 V, 74/37 amps, 60 Hz, 3 phase. Inlets: 14 inches length x 24 inches width. Outlets: 4 inches diameter flanged discharge. Overall dimensions: 4 feet 11 inches length x 4 feet 3 inches width x 10 feet 2 inches height.
|
|
Stock No: fpe_169 |
Mfg: AEC Nelmor Co Inc. |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 1995 Comec Vertical Stainless Steel Micro Ball Mill. Type: M100. Mat: 6983. ABB motor, 20 horse power [20.11 Kw], 1740 rpm, 60 Hz, 440 volts & 40 amps, 440 volts & 34 amps. Stainless steel double wall tank: 25 gallon [100 liter]. Useful capacity: minimum 8 gal. [30 liters]; maximum 23.5 gal. [90 liters]. Ball charge: 44 pounds [20 Kg]. [2] Grinder discs: 10 inches diameter. Pressure cover: 20 inches diameter, additional opening: 8 inches diameter. Control box. Manual switch controller: electric tripping, slow speed, fast speed, stop. Tank opening: 1 inches threaded male, valve. Overall dimensions: 52-1/2 inches length x 23-1/2 inches width x 69 inches height. [ACN197]
|
|
Stock No: fpe_DSVT029.2a |
Mfg: Comec |
Model: Type M100 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Buffalo Grinder/Extruder Cutting Blades. [33] Kasco Corporation, P/N: 600 HK. [4] Brassed Blade. [5] ASCO, P/N: 66. Distance from tip to tip: 7-3/4 inches L, square hole size: 1-1/2 inches L x 1-1/2 inches W.
|
|
Stock No: fpe_KLPC323B. |
Mfg: Buffalo |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used [19] Buffalo Grinder/Extruder Plates. Various hole sizes: 1/4 inches, 3/16 inches, and 1 inches Overall dimensions: 9-1/2 inches diameter x 2-1/2 inches height.
|
|
Stock No: fpe_KLPC323D. |
Mfg: Buffalo Pumps |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_TACJ1071.3a |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
