Used Russell Coil Company 4-Fan Evaporator – 5 Tons

Used [4] Russell Coil Company 4-Fan Evaporators. Model: SU44-600HG. Refrigerant: R-717 [Ammonia]. Approximate capacity: 5 tons for a -10°F room with a -20°F suction temperature. Unit surface area: 1,832 square feet Fins per inch: 4. [4] 20 inches diameter fans, motors: 1/6 horse power, 230 V, 11.2 A, 60 Hz. Fan diameter: 20 inches Unit displacement: 10,800 cubic feet per minute. Inlets: [1] 1/2 inches diameter port. Outlets: [1] 4-bolt 1-1/2 inches diameter flange, [1] 3/4 inches diameter port. Units are equipped with hot gas defrost for low temperature applications. Estimated weight: 560 pounds Overall dimensions: 10 feet 4 inches length x 2 feet 9-1/2 inches width x 2 feet 2-1/2 inches H.[ACN200][h15].

Used Rigidbilt Inc. Hanging Evaporator - 8.5 Tons

Used Rigidbilt Inc. Hanging Evaporator. Model: C110-103RA. Estimated nominal capacity: 8.5 tons or 11,000 BTUH using direct expansion ammonia [R-717] for a 40°F room with a suction temperature of 30°F. Coil: 10 rows of a ¾ inch diameter tube with 3 fins per inch. [2] squirrel cage design fans, 2 feet 1 inch diameter, each with 48 blades. Pulley diameters: [1] 7-1/2 inch driver. [1] 1 foot 1-3/4 inch driven. U.S. Electrical motor: 5 hp, 1725 rpm, 230/460 V, 14.4/7.2 A, 60 Hz, 3 phase. Cutler-Hammer on/off power box: 20 max hp, 600V, 30A, 3 phase. Front air inlet dimensions: 3 feet L x 1 foot W. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch NPT, [1] ¾ inch NPT. Front air vent dimensions: 3 feet L x 1 foot W. Overall dimensions: 8 feet 6-1/2 inches L x 3 feet 7-1/2 inches W x 6 feet 5-1/4 inches H.[ACN145].

Used Rigidbilt Inc. Hanging Evaporator – 8.5 Tons

UsedRigidbilt Inc. Hanging Evaporator. Model: C110-103RA. Estimated nominal capacity: 8.5 tons or 11,000 BTUH using direct expansion ammonia [R-717] for a 40°F room with a suction temperature of 30°F. Coil: 10 rows of a ¾ inch diameter tube with 3 fins per inch. [2] squirrel cage design fans, 2 feet 1 inch diameter, each with 48 blades. Pulley diameters: [1] 7-1/2 inch driver. [1] 1 foot 1-3/4 inch driven. U.S. Electrical motor: 5 hp, 1725 rpm, 230/460 V, 14.4/7.2 A, 60 Hz, 3 phase. Cutler-Hammer on/off power box: 20 max hp, 600V, 30A, 3 phase. Front air inlet dimensions: 3 feet L x 1 foot W. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch NPT, [1] ¾ inch NPT. Front air vent dimensions: 3 feet L x 1 foot W. Overall dimensions: 8 feet 6-1/2 inches L x 3 feet 7-1/2 inches W x 6 feet 5-1/4 inches H.[ACN145].

Used Rigidbilt Inc. Hanging Evaporator – 8.5 Tons

Used Rigidbilt Inc. Hanging Evaporator. Model: C110-103RA. Estimated nominal capacity: 8.5 tons or 11,000 BTUH using direct expansion ammonia [R-717] for a 40°F room with a suction temperature of 30°F. Coil: 10 rows of a ¾ inch diameter tube with 3 fins per inch. [2] squirrel cage design fans, 2 feet 1 inch diameter, each with 48 blades. Pulley diameters: [1] 7-1/2 inch driver. [1] 1 foot 1-3/4 inch driven. U.S. Electrical motor: 5 hp, 1725 rpm, 230/460 V, 14.4/7.2 A, 60 Hz, 3 phase. Cutler-Hammer on/off power box: 20 max hp, 600V, 30A, 3 phase. Front air inlet dimensions: 3 feet L x 1 foot W. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch NPT, [1] ¾ inch NPT. Front air vent dimensions: 3 feet L x 1 foot W. Overall dimensions: 8 feet 6-1/2 inches L x 3 feet 7-1/2 inches W x 6 feet 5-1/4 inches H.[ACN145].

Used Rigidbilt Inc. Hanging Evaporator – 8.5 Tons

Used Rigidbilt Inc. Hanging Evaporator. Model: C110-103RA. Estimated nominal capacity: 8.5 tons or 11,000 BTUH using direct expansion ammonia [R-717] for a 40°F room with a suction temperature of 30°F. Coil: 10 rows of a ¾ inch diameter tube with 3 fins per inch. [2] squirrel cage design fans, 2 feet 1 inch diameter, each with 48 blades. Pulley diameters: [1] 7-1/2 inch driver. [1] 1 foot 1-3/4 inches driven. U.S. Electrical motor: 5 Hp, 1725 rpm, 230/460 V, 14.4/7.2 A, 60 Hz, 3 Phase. Cutler-Hammer on/off power box: 20 max Hp, 600 V, 30 A, 3 Phase. Front air inlet dimensions: 3 feet L x 1 foot W. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch NPT, [1] ¾ inch NPT. Overall dimensions: 8 feet 6-1/2 inches L x 3 feet 7-1/2 inches W x 6 feet 5-1/4 inches H.[ACN145].

Used Rigidbilt Inc. Evaporator – 9.5 Tons

Used Rigidbilt Inc. Evaporator. Model: AF160-63RAHG. Rated capacity: 9.5 tons using recirculated R-717, 16,000 cfm. Coil: 6 rows of ¾ inch diameter tubes with [3] fins per inch. [2] 30 inch diameter axial fans. This unit features hot gas defrost. Motors: [2] Baldor Electric, 3 hp 3 phase 208-230/460v, 1725 rpm. [2] Cutler-Hammer on/off power boxes: 20 max hp, 600 V, 30 A, 3 phase. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch drain, [1] 1 inch NPT. Inlets/outlets: [1] 1 inch NPT and [1] 2 inch NPT. Overall dimensions: 10 feet 2 inches L x 3 feet 11 inches W x 3 feet 9 inches H.

Used Rigidbilt Inc. Evaporator – 9.5 Tons

Used Rigidbilt Inc. Evaporator. Model: AF160-63RAHG. Rated capacity: 9.5 tons using recirculated R-717, 16,000 cfm. Coil: 6 rows of ¾ inch diameter tubes with [3] fins per inch. [2] 30 inch diameter axial fans. This unit features hot gas defrost. [2] Toshiba 3 hp 3 phase 230/460 V 8.5/4.3 A 1735 rpm. Inlets/outlets: [1] 2-1/2 inch NPT, [1] 2 inch drain, [1] 1 inch NPT. Inlets/outlets: [1] 1 inch NPT and [1] 2 inch NPT. Overall dimensions: 10 feet 2 inches L x 3 feet 11 inches W x 3 feet 9 inches H.

Used Rigidbilt Inc. 4-Fan Ammonia Evaporator – 5 Ton

Used Rigidbilt Inc. 4-Fan Ammonia Evaporator. Model: UC4-420XA. Serial Number: 29862. Nominal capacity: 5 tons. Internal volume: 7.69 gal. Nominal fin spacing: 4 fpi. [4] General Electric fan motors, 1/3 horse power, 1723 rpm, 230 V, 2.5 amps, 60 Hz, single phase. Fan diameter: 20 inches Inlets: [1] 3/4 inches diameter refrigerant infeed. Outlets: [1] 1 inches suction discharge. Overall dimensions: 10 feet length x 2 feet 11 inches width x 2 feet 9-1/2 inches height.

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton. Model: UC4-420XA. Serial Number: 29862. Internal volume: 7.69 gal. Fan diameter: 20 inches Nominal fin spacing: 4 fpi. [4] General Electric Fan Motors, 1/3 horse power, 1723 rpm, 230 V, 2.5 amps, 60 Hz, single phase. Inlets: [1] 3/4 inches diameter refrigerant infeed. Outlets: [1] 1 inches suction discharge. Overall dimensions: 10 feet length x 35 inches width x 33-1/2 inches height.[acn65].

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton. Model: UC4-420XA. Serial Number: 29862. Internal volume: 7.69 gal. Fan diameter: 20 inches Nominal fin spacing: 4 fpi. [4] General Electric Fan Motors, 1/3 horse power, 1725 rpm, 230 V, 2.5 amps, 60 Hz, single phase. Inlets: [1] 3/4 inches diameter refrigerant infeed tube. Outlets: [1] 1-1/2 inches diameter suction port, [1] 1-1/2 inches diameter [drain]. Overall dimensions: 10 feet 11 inches length x 40 inches width x 34-1/2 inches height.[ACN65].

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton

Used Rigidbilt Inc. Direct Expansion Ammonia Evaporator- 5 Ton. Model: UC4-420XA. Serial Number: 29862. Internal volume: 7.69 gal. Fan diameter: 20 inches Nominal fin spacing: 4 fpi. [4] General Electric Fan Motors, 1/3 horse power, 1725 rpm, 230 V, 2.5 amps, 60 Hz, single phase. Inlets: [1] 3/4 inches diameter refrigerant infeed tube. Outlets: [1] 1-1/2 inches diameter suction port, [1] 1-1/2 inches diameter [drain]. Overall dimensions: 10 feet 11 inches length x 40 inches width x 34-1/2 inches height.[acn65].

Used Western Engineers, Inc. Evaporator Coil

[4] Used Western Engineers, Inc. Evaporator Coil. Model: 2711CB. Serial No: 10871 A/C. Material of construction: galvanized steel. Coil Face is 10 feet 4 inches W x 4 feet H x 1 foot 6 inches deep. [16] 1 inch diameter coils, 4 rows deep at 4 FPI. Electrical requirement: 110v, 60 Hz. Overall dimensions: 12 feet L x 1 foot 7-3/4 inches W x 5 feet 1 inch H.

Used Stainless Steel Dual Fan Evaporator Unit- 5.8 Ton

Used Stainless Steel Dual Fan Evaporator Unit- 5.8 Ton. [2] Motors. Motor #1- Century Motor, 1/2 horse power, 1140 rpm, 208-230/460 V, 2.0-1.9/0.95 amps, 60 Hz, 3 phase. Motor #2- Franklin motor, 1/2 horse power, 1140/950 rpm, 208-230/460 V, FLA: 1.96/0.98 & 2.24/1.12, 3 phase. Galvanized coils. Refrigerant: ammonia. Inlets/outlets; [2] 2 inches, flange: 6 inches center to center: 4-1/2 inches with [4] holes. For quick freezing. Overall dimensions: 95 inches length x 43 inches width x 42 inches height.