Crepaco Centrifugal Pump. Model: n/a. S/N: 6-25652. Impeller- 5-1/2 in. dia., double mechanical seals. Inlets/outlets: (1) 1-1/2 in. dia. threaded connection and (1) 2 in. dia. threaded connection. Overall dimensions: 36 in. L x 13 in. W x 17 in. H.
Tri-Clover Centrifugal Pump. Model SP328ME-00B-S. S/N E3152. 3 in. Inlet, 2 in. Outlet, 7 in. Impeller with water flush double mechanical seals. Ajax Motor, S/N: 60942554, 7.5 hp, 1,800 rpm, 220/460 V, 60 Hz, 20/10 amps, 3-phase. Overall Dimension: 44 in. L x 19 in. W, x 16 in. H.
Peerless Centrifugal Pump. Model: 8196 ST. S/N: 2695876-581C. Size: 1x1-1/2x8. Mat’l constr: 316 Stainless steel. Impeller dia.: 8 in. Seal option: double mechanical seals with flushing. Reliance Electric Motor, 10 hp, 3510 rpm, 230/460 V, 60 Hz, 23.4/11.7 amps, 3 phase. Inlets: (1) 1-1/2 in. dia. flanged port. Outlets: (1) 1 in. dia. flanged port. Overall dimensions 39 in. L x 1 ft. 4 in. W x 1 ft. 6 in. H.
Tri-Clover Centrifugal Pump. Model SP328ME-00B-S. S/N E3151. 3 in. Inlet, 2 in. Outlet, 7 in. Impeller with water flush double mechanical seals. Ajax Motor, 7.5 hp, 1,800 rpm, 220/460 V, 60 Hz, 20/10 amps, 3-phase. Overall Dimension: 44 in. L x 19 in. W, x 16 in. H.
Tri Clover PRRED125 Positive Displacement Pump. Model: PRRED125-2/12M-TC1-4-SL. S/N: V1081. Capacity: 115 gpm @ 60 psi. Double mechanical seals with water flush. Vented pressure relief cover. Reliance Electric MinPak Plus VSdrive, input: 230 VAC, 35 amps, single phase, 50/60 Hz, output: 180 VDC, 25 amps, DC field: 200 VDC, 3 amps. Reliance Electric Motor, 5 hp, 1750 rpm, 180 V, 23 amps. Dodge Master XL Gear Drive, 4.1 ratio, 426.83 rpm (final). Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 64 in. L x 20 in. W x 54 in. H.
Waukesha 15 Positive Displacement Pump. Model: 15. S/N: 20576 SS. 316 Stainless steel construction. Capacity: 4.4 gpm. Nominal gpm: 9. Displacement per revolution: 0.0142 gal. Maximum speed: 700 rpm. Vented cover. Seal option: double mechanical carbon seals with flushing. Easy disassembly for easy cleaning and flexible three-way mounting. 3-A and BISS approved. Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460V, 1.5/.75 amps, 60 Hz, 3 phase. Nord speed reducer 5.56 ratio, 310 final rpm. Overall dimensions: 38 in . L x 11 in. W x 14 in. H.
Waukesha Cherry-Burrell, Positive Displacement Pump, Model 220, SN: 134527. Capacity: 70 gpm. Nominal capacity: 310 gpm. Displacement per revolution: 0.50 gal/rev. Maximum allowable speed: 600 rpm. Baldor,15 Hp. 1765 Rpm. 460 Volts. 60 Hz. 3 phase. Baldor motor, 1/3 hp. 3450 Rpm. 115/208-230 Volts. 2.5/1.3-1.25 Amps. 60 Hz. 3 phase. Sew-Eurodrive. Ratio 13.01. Final Rpm 135. Seal option: double mechanic seal with water flush. Inlet: (1) 4 in. dia (male). Outlet: (1) 4 in. dia (male). Overall Dimensions: 6 ft. 11 in. L x 1 ft. 6-1/2 in. W x 2 ft. 7 in. H. (ACN171).
2001 Gorman-Rupp Centrifugal Pump. Model: 16A20-B. S/N: 1019093N. Double mechanical seals with water flush. Impeller dia: 12-1/2 in. Inlets/outlets: (1) 8 in. 45 degree elbow and (1) 6-1/2 in. pipe. Baldor Super-E Motor: 25 hp, 1780 rpm, 230/460 V, 61/30.5 amps, 60 Hz, 3 phase. Overall dimensions: 78 in. L x 23-1/2 in. W x 64 in. H.
1994 G & H Positive Displacement Pump
Mfg: G & H
Model:622P
Stock No. ATE003.
Serial: 94-9-4665A
1994 G & H Positive Displacement Pump. Model: 622P. S/N: 94-9-4665A. Nominal capacity: 135 gpm. Nominal displacement: 14.6 gal/100 rev. Maximum speed: 1000 rpm. Double mechanical seals. Baldor Industrial Motor, 5 hp, 1725 rpm, 208-230/460 V, 15-13.2/6.6 amps, 60 Hz, 3 phase. Reliance Variable Speed Drive, ratio: 7.6, max speed: 550 rpm, min speed: 55 rpm (final). Inlets/outlets: (2) 2 in. dia. Q-line fittings. Stainless steel rotors and vertical ports. The GHPD rotary lob positive displacement pump was designed to meet specific processing needs in the dairy, food, chemical, pharmaceutical, and biotech industries. When operating at optimum speeds, this pump provides gentle handling of both viscous and water-like products. Overall dimensions: 4 ft. 8 in. L x 1 ft. 8 in. W x 3 ft. 2 in. H.
Goulds Centrifugal Pump. Model 3196. S/N: 788B859 BKPO. Size: 1 in. x 1-1/2 in. x 8 in. Alloy 20 material construction. Double mechanical seals with flushing. Overall dimensions: 36 in. L x 12 in. W x 22 in. H. (ACN71)
Goulds Centrifugal Pump. Model 3196. S/N 788B861. Size 1 in. x 1-1/2 in. x 8 in. Impeller dia: 6.62 in. Material Construction: Alloy 20. Capacity: 14 gpm @ 51 hd.ft. Double mechanical seals with flushing. Motor specifications: 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase. Overall dimensions: 35 in. L x 12 in. W x 15 in. H. (ACN71)
Goulds Centrifugal Pump. Model: 3196. S/N: 794D636. Size: 1.5x3-13. 316 stainless steel. Impeller diameter: 11-1/2 in. Double mechanical seals with water flush. U.S. Motor: 15 hp, 1765 rpm, 230/460 V, 39.6/19.8 amps, 60 Hz, 3 phase. Overall dimensions: 52 in. L x 19 in. W x 25 in. H. (ACN71)
Goulds Centrifugal Pump. Model: 3196, S/N: 788B860. Size: 1.5 x 1 - 8. Impeller dia: 7.25 in. Material construction: Alloy 20. Capacity: 42 gpm @ 60 ft. hd. Double mechanical seals with flushing. Motor specifications: 2 hp, 1730 rpm, 208-230/460 V, 6.4/3.2 amps, 60 Hz, 3 phase. Overall dimensions: 36 in. L x 12 in. W x 15 in. H. (ACN71)
Goulds Centrifugal Pump. Size: 3x4. 316 stainless steel. Impeller diameter: 7 in. Double mechanical seals with water flush. General Electric Motor: 7.5 hp, 1760 rpm, 575 V, 8.7 amps, 60 cycles, 3 phase. Overall dimensions: 46 in. L x 16 in. W x 23-1/2 in. H.
Goulds Centrifugal Pump. Model: 3196. S/N: 707E722. Size: 2x3-10. 316 stainless steel. Maximum design pressure @ 100 °F: 275 psi. Impeller diameter: 9 in. Double mechanical seals with water flush. Reliance Electric Motor: 7.5/3.30 hp, 1775/1185 rpm, 460/460 V, 9.40/5.50 amps, 60/60 Hz, 3 phase. Overall dimensions: 55 in. L x 20 in. W x 26 in. H. (ACN71)
Waukesha 18 Positive Displacement Pump. S/N: 216072 98. Nominal range: 17 gpm. Displacement per revolution: 0.029 gallons. Pressure range: 200 psi. Motor, 1/2 hp, 1725 rpm, 230/460 V, 1.5/.75 amps, 60 Hz, 3 phase. Nord Gear, ratio: 4.82, rpm out: 357 (final). Easy cleaning and disassembly. Flexible, three-way mounting. Field interchangeable single and double "O" ring and mechanical seals. Exclusive, non-galling Waukesha "88" alloy rotors. 3-A and BISCC approved. Inlets/outlets: (2) 1-1/2 in. dia. NPT. Overall dimensions: 2 ft. 8 in. L x 10 in. W x 11 in. H.
Goulds Centrifugal Pump. Model: 3196. S/N: 756E317. 316 stainless steel. Impeller diameter: 8-1/2 in. Double mechanical seals with water flush. Reliance Electric Motor: 7.5/3.30 hp, 1775/1185 rpm, 460/460 V, 9.40/5.50 amps, 60/60 Hz, 3 phase. Overall dimensions: 55 in. L x 20 in. W x 23 in. H. (ACN71)
Goulds Centrifugal Pump. Model: 3196, S/N: 729E506. Inlet: 3 in. Outlet: 1-1/2 in. Max impeller diameter: 6 in. Material construction: Hastalloy C. Double mechanical seals with flushing. US Motors: 7.5 hp, 1760 rpm, 230/460 V, 19/9.5 amps, 60 Hz, 3 phase. Overall dimensions: 40 in. L x 20-1/2 in. W x 18 in. H. (ACN71)
Goulds Centrifugal Pump. Model: 3196, S/N: 788B856. Inlet: 1-1/2 in. Outlet: 1 in. Max impeller diameter 6 in. Impeller diameter: 4.75 in. Material construction: Alloy 20. Double mechanical seals with flushing. US Motor: 5 hp, 3450 rpm, 230/460 V, 13.3/6.7 amps, 60 Hz, 3 phase. Overall dimensions: 40 in. L x 13 in. W x 19 in. H. (ACN71)
Waukesha 6 Positive Displacement Pump. S/N: 87675 SS. Displacement per revolution: 0.0082 gal. Nominal capacity: 6 gpm. Maximum speed: 800 rpm. Flexible, three-way mounting. Field interchangeable single and double "O" ring and mechanical seals. Exclusive, non-galling Waukesha "88" alloy rotors. Inlets/outlets: (2) 1-1/2 in. dia. S-line fittings. Overall dimensions: 12 in. L x 7 in. W x 8-1/2 in. H.
Viking DuraLobe Positive Displacement Pump. Model: S2M. S/N: C13324. 316 Stainless steel construction. Maximum capacity: 70 gpm at 1150 rpm. Maximum pressure: 150 psi. Working temperature range: -40°F to 300 °F. Seal option: Double mechanical seals. U.S. Motor, 3 hp, 230/460 V, 8.8/4.4 amps, 60 Hz. Motor drive. DuraLobe series' bi-wing rotor form minimizes slip, allows relatively high pressures, and also provides large voids for handling soft solids such as cherry pie filling. Pump inlet/outlet: 2 in. 'S' line. Overall dimensions: 3 ft. 7 in. L x 1 ft. 6 in. W x 1 ft. 3 in. (ACN59).
Durco / Duriron Centrifugal Pump. Model: Mark II. S/N: 165830. Size: 3x2 - 7. Stainless steel impeller, casing, and shaft. Capacity: 300 gpm @ 160 head feet (~70 psi using specific gravity of water = 1). Displacement per Revolution: 0.085. Seal Option: double mechanical with water flush. Impeller: 7 in. dia. Baldor Motor, 1.5 HP, 3,450 rpm, 208-230/460 V, 60 Hz, 19-18/9 amps, 3-phase. Inlet: 3 in. flange. Outlet: 2 in. flange. Overall Dimensions: 3 ft. 6 in. L x 1 ft. 1 in. W x 1 ft. 8 in. H. (ACN25).
Peerless Centrifugal Pump, Model 8196 ST, 316 Stainless steel. Size 1-1/2 in. x 1 in. x 8 in. with water flush double mechanical seals. Baldor Motor, S/N 37A01250, 10 hp, 1,725 rpm, 230/460 volt, 60 Hz, 26/13 amps, 3 phase . Overall Dimensions 39 in. L x 12 in. W x 15 in. H.
Mission Centrifugal Pump. Size: 1.5 x 3. Impeller diameter: 10 in. Pump features double mechanical seals with water flush. Reliance Motor: 7.5 hp, 1,760 rpm, 230/460 V, 18/9 amps, 60 Hz, 3 phase. Overall dimensions: 48 in. L x 18 in. W x 20 in. H.
Tri-Clover Positive Displacement Pump. Model: PRRED60-2M-TC1-4-SL-S, S/N: T6840J. Double mechanical seals with water flush. (4) Casters for easy positioning. Baldor Industrial Motor: 5 hp, 1725 rpm (input). Reeves Variable Speed Drive: 7.6:1 ratio, 550 rpm (max), 55 rpm (min). Inlets/outlets: (2) 2 in. dia. Q-line fittings. Overall dimensions: 58 in. L x 16 in. W x 35 in. H.
Fristam FP-Series Centrifugal Pump. S/N: 12122759. Capacity: 150 gpm. Impeller diameter: 5.00 in. Seal option: double mechanical with flushing. Baldor Industrial Motor, 5 hp, 3450 rpm, 208-230/460 V, 13-12/6 amps, 60 Hz, 3 phase. The FP-Series is the original Fristam pump with established the standard for high performance centrifugals. These heavy-duty, high performance sanitary centrifugal pumps handle the most demanding applications such as vacuum withdrawal from evaporators, viscous, hot, or abrasive products. Completely CIP-and SIP-able. Inlets: (2) 2-1/2 in. dia. S-line. Outlets: (1) 1-1/2 in. dia. S-line. Overall dimensions: 29 in. L x 13 in. W x 18-1/2 in. H.
Fristam FP-Series Centrifugal Pump. Model: FP742. S/N: 42122495. Capacity: 100 gpm. Impeller diameter: 5-3/4 in. Seal option: double mechanical with flushing. Motor, 230 V, 7.5 amps. The FP-Series is the original Fristam pump with established the standard for high performance centrifugals. These heavy-duty, high performance sanitary centrifugal pumps handle the most demanding applications such as vacuum withdrawal from evaporators, viscous, hot, or abrasive products. Completely CIP-and SIP-able. Inlets: (1) 2-1/2 in. dia. S-line fittings. Outlets: (1) 2 in. dia. S-line fittings. Overall dimensions: 29 in. L x 13 in. W x 18-1/2 in. H.
APV Puma Pump, 1.5/2/7 Shrouded 1.5 hp 230/460 volt, 3 ph 3,500 rpm, 4 in. impeller water flush seal tri-clamp connections S/N A5346 this pump has been fully re-furbished with a brand new motor (un-used) and seal assembly.
APV Puma Pump
Mfg: APV Puma
Model:
Stock No. CPSS2b.8
Serial:
APV Puma Pump, 2/3/9 Shrouded 3 hp, 230/460 volt, 3 ph, 60 Hz, 3,500 rpm, 6 in. impeller water flush seal tri-clamp connections S/N MPP01014 this pump is brand new has never been used.
APV Puma-Series Centrifugal Pump
Mfg: APV Puma
Model:IV
Stock No. EQDNES5b.
Serial: 20046
APV Puma-Series Centrifugal Pump. Model: IV. S/N: 20046. Size: 3x2. Capacity: ~67 gpm @ 21 tdh (9.1 psi using specific gravity of water = 1). Displacement per Revolution: 0.037 gal. Impeller diameter: 7 in. U.S. Electric Motor, 3 hp, 1750 rpm, 208-230/460 V, 9.3-8.8/4.4 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting. Outlets: (1) 2 in. dia. S-line fitting. Overall dimensions: 1ft. 11 in. L x 1 ft. W x 1 ft. 5 in. H. (ACN21).
APV Puma pump, Size 2-½ - 2, S/N U5851. Inlet size 2-½ in. outlet size 2 in. Brook Electric Motor 440 volt, 6.9 amps, 3,450 rpm, 60 Hz, 3 phase, 5 hp. Impeller Size 4-½ in.
APV Puma Centrifugal Pump
Mfg: APV
Model:2 - 2-1/2
Stock No. ENDX685b.1a
Serial: D1041
APV Puma Centrifugal Pump. Stainless steel. Model 2 - 2-½. S/N D1041. Inlet 2.5 in. Outlet 2 in. 7.5 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 3 hp Size 2-2
Mfg: APV
Model:2-2.
Stock No. ENDX687b.1a
Serial: R1402
APV Puma Pump. Stainless steel. Size: 2-2, Series V, S/N R1402. Brook Hansen Motor, 3 hp, 575 volt, 2.8 amps, 60 Hz, 3 phase. Overall Dimensions 25 in. L x 18 in. W x 16 in. H.
APV Puma Centrifugal Pump 3 hp. Stainless steel. Model 2-2. S/N R1404. Inlet 2 in. Outlet 2 in. 3 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 3 hp Model 2-2
Mfg: APV
Model:2-2
Stock No. ENDX689b.1a
Serial: R1405
APV Puma Centrifugal Pump 3 hp. Stainless steel. Model 2-2. S/N R1405. Inlet 2 in. Outlet 2 in. 3 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 5 hp Model 2-2
Mfg: APV
Model:2-2.
Stock No. ENDX690b.1a
Serial: R1403
APV Puma Pump. Size: 2-2, Series V, Number: R1403, Inlet: 2 in. Outlet 2 in. Brook Hansen Motor, 3 phase, 3,460 rpm, 60 hz, 575 volt, 4.6 amps, 5 hp. Overall Dimensions: 24 in. L x 21 in. W x 18 in. H.
APV Puma Pump. Stainless steel. Size: 3-2, Series VI, S/N 20019. Invensys Motor, 5 hp, 3,450 rpm, 575 volt, 4.6 amps, 60 Hz, 3 phase. Overall Dimensions 26 in. L x 18 in. W x 16 in. H.
APV Puma Centrifugal Pump 3 hp Model 3-2
Mfg: APV
Model:3-2.
Stock No. ENDX692b.1a
Serial: 20018
APV Puma Centrifugal Pump 3 hp. Stainless steel. Model 3-2. S/N 20018. Inlet 3 in. Outlet 2 in. 3 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 3 hp Model 2-2
Mfg: APV
Model:2-2
Stock No. ENDX693b.1a
Serial: 1401
APV Puma Centrifugal Pump 3 hp. Stainless steel. Model 2-2. S/N 1401. Inlet 2 in. Outlet 2 in. 3 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 7.5 hp Series V Model 2 1/2-2
Mfg: APV
Model:2 1/2-2
Stock No. ENDX697b.1a
Serial: U8282MT
APV Puma Centrifugal Pump 7.5 hp. Series V. Stainless steel. Model 2 1/2-2. S/N U8282MT. Inlet 2.5 in. Outlet 2 in. 7.5 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 7.5 hp Model 2-2 1/2
Mfg: APV
Model:2 -2 1/2
Stock No. ENDX701b.1a
Serial: P868
APV Puma Centrifugal Pump 7.5 hp. Stainless steel. Model 2 -2 1/2. S/N P868. Inlet 2 in. Outlet 2.5 in. 7.5 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 7.5 hp Model 2 -2
Mfg: APV
Model:2 -2
Stock No. ENDX702b.1a
Serial: 2-81021
APV Puma Centrifugal Pump 7.5 hp. Stainless steel. Model 2 -2. S/N 2-81021. Inlet 2 in. Outlet 2 in. 7.5 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump 7.5 hp Model Size 2
Mfg: APV
Model:2
Stock No. ENDX704b.1a
Serial: B2350
APV Puma Centrifugal Pump 7.5 hp. Stainless steel. Model Size 2. S/N B2350. Inlet 2 in. Outlet 2 in. 7.5 hp, 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma 7.5 hp Centrifugal Pump Model 2 - 2 ½
Mfg: APV
Model:2 - 2 1/2
Stock No. ENDX721b.1a
Serial: P1160
APV Stainless Steel Puma Pump, Size: 2-2 1/2, S/N 1160. Brook Crompton Parkinson Motor, 7.5 hp, 3,420 rpm, 575 volts, 7.5 amps, 60 Hz, 3 phase. Overall Dimensions 35 in. L x 14 in. W x 26 in. H.
APV Puma 5 hp Centrifugal Pump Stainless Steel, Size: 2- 2 1/2, Series III, S/N U2866M. Brook Crompton Parkinson, Ltd., Motor, 5 hp, 3,420 rpm, 575 volts, 5.3 amps, 60 Hz, 3 phase. Overall Dimensions 29 in. L x 13 in. W x 18 in. H.
APV Puma 3 hp Centrifugal Pump, Stainless Steel. Size: 2 1/2-2, Series III, S/N: U5739M. Brook Crompton Parkinson, Ltd., Motor, 3 hp, 3,480 rpm, 575 volts, 5.3 amps, 60 Hz, 3 phase. Overall Dimensions 29 in. L x 16 in. W x 18 in. H.
APV Puma 3 hp Centrifugal Pump. Stainless steel. Model 2 - 1 ½. S/N U7521M. Inlet 2 in. Outlet 1.5 in. 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma 3 hp Centrifugal Pump Model 2 - 2
Mfg: APV Puma
Model:2 - 2
Stock No. ENDX736b.1a
Serial: U3907M
APV Puma 7.5 hp Centrifugal Pump. Stainless steel. Model 2 - 2. S/N U3907M. Inlet 2 in. Outlet 2 in. 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma 7.5 hp Centrifugal Pump Model 2 - 2
Mfg: APV Puma
Model:2 - 2
Stock No. ENDX737b.1a
Serial: U2217M
APV Puma 7.5 hp Centrifugal Pump. Stainless steel. Model 2 - 2. S/N U2217M. Inlet 2 in. Outlet 2 in. 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma 7.5 hp Centrifugal Pump Model 2-1/2 - 2
Mfg: APV Puma
Model:2-1/2 - 2
Stock No. ENDX738b.1a
Serial: U6399M
APV Puma 7.5 hp Centrifugal Pump. Stainless steel. Model 2-½ - 2. S/N U6399M. Inlet 2.5 in. Outlet 2 in. 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma 7.5 hp Centrifugal Pump Model 2 - 2
Mfg: APV Puma
Model:2 - 2
Stock No. ENDX743b.1a
Serial: U5738M
APV Puma 7.5 hp Centrifugal Pump. Stainless steel. Model 2 - 2. S/N U5738M. Inlet 2.5 in. Outlet 2 in. 575 volt, 60 Hz, 3 phase. Dimensions 2 ft. L, 1 ft. W, 2 ft. H.
APV Puma Centrifugal Pump
Mfg: APV Puma
Model:III
Stock No. ENDX002.
Serial: U1777M
APV Puma Centrifugal Pump. Model: III. S/N: U1777M. Impeller diameter: 5 in. Seal option: double mechanical with flushing. Brooks Electric Motor, 3480 rpm, 575 V, 60 Hz, 3.1 amps, 3 phase. Inlets: (1) 2 in. dia. ACME fitting. Outlets: (1) 2 in. dia. ACME fitting. Overall dimensions: 29 in. L x 12-1/2 in. W x 16-1/2 in. H.
APV Puma Centrifugal Pump. Model: III. S/N: U2220M. Impeller diameter: 5 in. Brook Electric Motor, 5 hp, 3450 rpm, 575 V, 5.2 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. ACME fittings. Outlets: (1) 2 in. dia. ACME fittings. Overall dimensions: 28-1/2 in. L x 12 in. W x 15-1/2 in. H.
APV Puma pump stainless steel pump serial no. U5862 size 2.5 - 2, 2.5 inch and 2 inch inlet outlet.
APV Puma Pump Stainless Steel
Mfg: APV
Model:
Stock No. 25b.198
Serial: U5866
APV Puma pump stainless steel pump serial no. U5866 size 2.5 - 2, 2.5 inch and 2 inch inlet outlet.
SOLD Waukesha 60 Positive Displacement Pump SOLD
Mfg: Waukesha Cherry Burrell
Model:60
Stock No. SNBB053b.14a
Serial: 177638 96
Waukesha Cherry Burrell Model 60 Positive Displacement Pump. S/N: 177638 96. Pump features double mechanical seals with water-flush. Inlets/outlets: (2) 2-1/2 in. dia. Q-line fittings. Overall dimensions: 19 in. L x 11 in. W x 16 in. H.
SOLD
Waukesha 30 Positive Displacement Pump. S/N: 19834 SS. Impeller diameter: 4-1/2 in. Pump features double mechanical seals with water flush. Sabre Reliance Electric Motor, 1.5 hp, 1730 rpm, 208-230/460 V, 5.0-4.8/2.4 amps, 60 Hz, 3 phase. Motor Drive, 165 rpm (final). Inlets/outlets: (2) 1-1/2 in. dia. MPT. Overall dimensions: 43 in. L x 9 in. W x 14-1/2 in. H.
SOLD
Fristam FP-Series Centrifugal Pump. Model: FP712. S/N: 12122713. Capacity: 75 gpm. Impeller diameter: 2-7/8 in. Seal option: double mechanical with flushing. Baldor Industrial Motor. The FP-Series is the original Fristam pump with established the standard for high performance centrifugals. These heavy-duty, high performance sanitary centrifugal pumps handle the most demanding applications such as vacuum withdrawal from evaporators, viscous, hot, or abrasive products. Completely CIP-and SIP-able. Inlets: (1) 2 in. dia. S-line fitting. Outlets: (1) 1-1/2 in. dia. S-line fitting. Overall dimensions: 25-1/2 in. L x 10 in. W x 13 in. H.
Superior Stainless Centrifugal Pump. Model: S0S-65, S/N: A4617. A-3 sanitary rated. Impeller diameter: 5 in. Features double mechanical seals with water flush. Inlets: (1) 2-1/2 in. dia. Q-line fitting. Outlets: (1) 2 in. dia. Q-line fitting. Overall dimensions: 21 in. L x 12 in. W x 12 in. H.
SOLD 1993 Waukesha Cherry Burrell Positive Displacement Pump Model 30-U1 SOLD
Mfg: Waukesha Cherry Burrell
Model:30-U1
Stock No. RBPM011.
Serial: 128060
1993 Waukesha Positive Displacement Pump. Model: 30-U1. S/N: 128060. Capacity: 21.24 gpm. Nominal capacity: 36 gpm. Displacement per Revolution: 0.060 gal. Seal Option: Double Mechanical with water flush. Baldor Industrial Motor, 1 ½ hp, 1725 rpm, 208-230/460 V, 5.3-5/2.5 amps, 60 Hz, 3 phase. Motor Drive, 354 final rpm. Suitable to 200 psi (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C). 1½" port size. 0-600 rpm speed range. Approved for 3A and BISCC applications, other features include: exclusive, non-galling Waukesha "88" alloy rotors, ease of disassembly for easy cleaning and flexible three-way mounting option. The model 30 –U1 is also equipped with a "vented cover" that is used as a pressure relief valve to avoid pump or equipment damage and is commonly used as a pressure regulator for pump discharge pressure. Valve is mechanically adjusted through a flexible spring. Inlets/outlets: (2) 1-1/2 in. dia. NPT fittings. Overall dimensions: 3 ft. 5 in. L x 11 in. W x 1 ft. 3 in. H. (ACN43a).
