|
|
|
|
|
|
Used 2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System. Model: ATD2[2]x3-130M-P135-A. Turbo-Disc filter systems are designed for the filtration of water for cooling towers and chilled water systems and require a supply of compressed air for operation. Rated capacity: 135 gallons per minute @ 80 psi max. Electrical requirements: 110 V. U.S. Electrical Motor 10 horse power. Bermad, 350 series back wash valve. Overall dimensions: 3 feet 6 inches length x 2 feet 6 inches width x 5 feet 3 inches H.[ACN110].
|
|
Stock No: fpe_DNBA215 |
Mfg: Miller-Leaman, Inc. |
Model: ATD2(2)x3-130M-P135-A |
S/N: fpe_TD-00154
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Frick Ammonia Evaporative Condenser. Model: HCU – 55A. Nominal capacity: 55 tons using R-717 [ammonia] at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. Total coil surface area: 652 square feet. 350 PSIG design pressure. 3 centrifugal fans. Spray pump motor: Mfg. Marathon. Part no. 2772RA, model: 4VA56T34D5349BP, ¾ or 1/2 hp, 3450 or 2850 rpm, 208-230/460V or 190/380V, 50 or 60 Hz, 3 phase. Inlets/outlets: [2] 3-1/2 inches, [3] ¾ inch, [1] 1-1/2 inches, [3] 3-1/3 inches, [1] 3 inches, 18 inch diameter manway. Overall dimensions: 12 feet 2-1/2 inches L x 4 feet 4 inches W x 8 feet 11 inches H.
|
|
Stock No: fpe_RMMS02 |
Mfg: Frick |
Model: HCU - 55A |
S/N: fpe_HN88022
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 1997 Evapco Evaporative Condenser. Model: PMCB 1770. Nominal capacity: 1770 Tons using R-22 at 105ºF condensing temperature, 40ºF suction temperature, and 78ºF wet bulb temperature. R-717 [ammonia] capacity rating: 1255 tons at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. [2] 30 hp and [2] 15 hp fan motors at 460V, 60 Hz, 3 phase. [2] 7.5 pump motors at 460V, 60 Hz, 3 phase. [6] fans. [2] Hansen Technologies hand valves, [2] Henry hand valves, [4] Hansen Technologies Pressure relief valves Cat. No. H5602. [2] manways, 20 in. diameter. Inlet / outlets: [2] 2 inch threaded, [1] 3 inch threaded, [1] 3-1/2 inch threaded, [2] 6 inch, [8] 4 inch. Overall dimensions: 36 feet 3-1/2 inches L x 11 feet 11-1/4 inches W x 15 feet 7-3/4 inches H.[H].
|
|
Stock No: fpe_DBDD01 |
Mfg: Evapco |
Model: PMCB 1770 |
S/N: fpe_974741M
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 1995 Baltimore Aircoil Company Evaporative Condenser. Model: VC2-1504. 1504 tons using R-22 at 105ºF condensing, 40ºF suction and 78ºF web bulb temperatures or 1083 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb temperatures. [2] Baltimore Aircoil Company centrifugal pumps, capacity: 834 gallons per minute [ea.] @ 17.4 tdh, impeller diameter: 5.80 inches Baldor industrial motor, 3 horse power, 208-230/460 V, 8.5-8.2/4.1 amps, 60 Hz, 3 phase. [6] 66 inches dia fans. [4] fan motors, 25 horse power, 1765 rpm, 208-230/460 V, 60 Hz, 3 phase. Inlets / outlets: [2] 1 feet 8 inches manway ports, [4] 4 inches dia ports. Overall dimensions: 39 feet 8 inches length x 12 feetW x 19 feet H.[ACN1226].
|
|
Stock No: fpe_DTTC866. |
Mfg: Baltimore Aircoil Company |
Model: VC2-1504 |
S/N: fpe_95100585
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stock No: fpe_AACA2075.85 |
Mfg: Evapco |
Model: PMCA 350 |
S/N: fpe_904473
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 1990 Evapco PMCA Series Evaporative Condenser. Model: PMCA-755. Nominal capacity: 755 tons using R-22 with a 105ºF condensing temperature, 40ºF suction temperature and a 78ºF wet bulb temperature, and approximately 530 tons with R-717 with a 96.3ºF condensing temperature, 20ºF suction temperature, and a 78ºF wet bulb temperature. Overall dimensions: 20 feet 2 inches L x 10 feet W x 14 feet 11 inches H.[acn958]
|
|
Stock No: fpe_CCPH01.25 |
Mfg: Evapco |
Model: PMCA-755 |
S/N: fpe_901336
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Baltimore Aircoil Evaporative Condenser. Model no. VNC-10A. Nominal capacity: 10 tons using R-22 at 40°F suction, 105°F condensing and 78° wet bulb. Rated at 7 tons using R-717 at 20°F suction, 96.3°F condensing and 78°F wet bulb. Paco centrifugal pump. [2] 18 inch manways. Inlets/outlets: ammonia hot / cold: 3 inches, overflow: 2 inches, drain: 3 inches, other: 2 inches, 3 inches, 1 inch, 1-1/2 inches. This small unit offers quiet operation in noise sensitive areas provided by slow moving centrifugal fans. Overall dimensions: 4 feet 2-1/2 inches L x 4 feet 6 inches W x 6 feet 2 inches H.[acn127a].
|
|
Stock No: fpe_NOI1009 |
Mfg: Baltimore Aircoil Company |
Model: VNC-10A |
S/N: fpe_77-1241
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Baltimore Air Coil Company Evaporative Condenser. Nominal rated capacity: 400 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb temperatures or 288 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb temperatures. Last used with ammonia. The fans, motor, and drive system are located outside of the moist discharge airstream, protecting them from moisture, condensation and icing. Unit is suitable for year-round operation. Number of fans: 8. Fan diameter: 1 feet 7 inches Number of motors: 4. Typical motor, 7.5 horse power, 1740 rpm, 230/460 V, 21.6/10.8 amps, 60 Hz, 3 phase. Inlets: [2] 3 inches diameter ports, [1] 4 inches diameter port. Outlets: [2] 2 ½ inches diameter ports, [1] 6 inches diameter port. Overall dimensions: 18 feet 6 inches length x 9 feet 1 inches width x 10 feet 6 inches H.[ACN565-76][BH].
|
|
Stock No: fpe_BNCA173A |
Mfg: Baltimore Air Coil |
Model: VLC- 400 |
S/N: fpe_764067P
|
|
|
|
|
|
|
|
|
|
|
|
|
Used VRTX™ Water Treatment System. Model: VRTX 125. Capacity: 125 gph. Used in combination with a water filtration system for the non-chemical water treatment of open cooling towers or evaporative condensers. Advantages in using the VRTX™ system include control of bacteria, corrosion and scale build-up in those water systems. G&L centrifugal pump: size: 1.5 x 2.5 x 8. Baldor industrial motor, 15 hp, 208-230 / 460V, 3450 rpm, 60Hz, 3 phase. Overall dimensions: 3 ft. 4 in. L x 2 ft. 3 in. W x 4 ft. 4 in. H.[ACN316].
|
|
Stock No: fpe_DNBA024 |
Mfg: VRTX |
Model: VRTX 125 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Un-Used Baltimore Aircoil Company CXV Evaporative Condenser. Model CXV-253. Approximate capacities: 320 tons using R-22 at 105ºF condensing temperature, 40ºF suction temperature and 78ºF wet bulb temperature, and 253 tons using R-717 at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. Airflow rate: 76,800 cubic feet per minute. Design features of the CXV series satisfy today's environmental concerns, minimize installation costs, maximize year-round operating reliability, and simplify maintenance requirements. [1] 15 horse power fan motor. [1] 5 horse power pump motor. Overall dimensions: 12 feet 1-1/4 inches length x 11 feet 10 inches width x 15 feet 10-3/4 inches H.[ACN399]
|
|
Stock No: fpe_NBAC01.255 |
Mfg: Baltimore Aircoil Company |
Model: CXV-253 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Baltimore Aircoil Company Evaporative Condenser Coil Section. Number of coils: 28. Number of rows: 16. Inlet: [2] 4 inches diameter Port, [1] 4 inches diameter MNPT port [water]. Outlet: [2] 4 inches diameter port, [1] 1 ¼ inches diameter port. Overall dimensions: 18 feet 9 inches length x 6 feet 8 inches width x 4 feet 10 inches height.
|
|
Stock No: fpe_NOI9003 |
Mfg: Baltimore Aircoil Company |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Baltimore Aircoil Company Evaporative Condenser. There is no tag to identify the model. It appears to be a model BAC300. Dimensions: 12ft. length x 10 feet width. [ID]
|
|
Stock No: fpe_pMHCR261.3 |
Mfg: Baltimore Aircoil Company |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used 1994 Vilter Evaporative Condenser. Model: VPF 300. Rated capacity: 300 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb temperatures and 210 tons with R-717 at 96.3 condensing, 20ºF suction, and 78ºF wet bulb temperatures. Design pressure: 300 psig. The casing panels, tank section, condensing coil and fan spools are hot-dipped galvanized. The coil is constructed of ¾ inches steel pipe, staggered and are pitched for complete and free draining of refrigerant. The fan propellers are constructed of heavy duty cast aluminum and are dynamically balanced. Overall dimensions: 19 feet length x 9 ft 4 inches width x 10 feet H.[hb2][ACN453].
|
|
Stock No: fpe_RPCN500. |
Mfg: Vilter |
Model: VPF 300 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|