Inventory Index  >  Cleaning / CIP Equipment  >  Cleaning Equipment

Used Hotsy High Pressure Washer. Model 991A, Serial Number H248 96 0693. Maximum discharge pressure: 2,000 psi. Capacity: 4 gallons per minute / 240 gallons per hour. Runs on natural gas. Motor: 5 horse power, 230 V, 60 Hz, 3 phase. Burner CH: 24 V, BTU per hour: 350,000. Total amp 16. Maximum inlet pressure: ½ psi. Inlet/outlet: 1 inches Overall dimensions: 3 feet 6 inches length x 1 feet 6 inches width x 5 feet 8 inches H.[ACN51].
Stock No: fpe_BWMC400.2a  |   Mfg: The Hotsy Corporation  |   Model: 991A  |   S/N: fpe_H248 96 0693

Used Tanker Spraywasher. Model: 358213-FQ. Serial Number: G56RC. Spray nozzles oscillate with motor action. Tube length: 44-1/2 inches Master Electric Gearmotor, 1/8 horse power, 1140 rpm, 115/230 V, 3.5/1.75 amps, single phase. Inlet: [1] 2 inches Overall dimensions: 58 inches length x 21-1/2 inches width x 16 inches height.
Stock No: fpe_OI253.  |   Mfg: Not Specified  |   Model: 358213-FQ  |   S/N: fpe_G56RC

Used 1998 Girton Pallet Washer Model CW10PS and 1997 Pasco Series 5000 Pallet Dispenser / Stacker System. Serial number: 97092401. Originally installed at Tropicana. This combination system dispenses, washes and stacks wooden pallets up to 72 inches length x 7-1/2 inches width at the rate of 120 per hour. 1997 [Pasco] Productive Automated Systems Corporation Pallet Dispenser / Pallet Stacker. Job No: 1306. Pallet Dispenser Motorized Roller Conveyor, 2-1/2 inches diameter rollers, maximum aperture/clearance above belt: 7 inches width x 3 feet H, conveyor infeed/exit height: 27 inches Baldor Industrial Motor, 3/4 horse power, 1725 rpm, 208-230/460 V, 2.3-2.2/1.1 amps, 60 Hz, 3 phase. Browning Gear Reducer, 40.1 ratio, 43 rpm [final]. Pallet Dispenser Motorized Chain Conveyor, maximum aperture/clearance above belt: 44 inches width x 7 inches height. Baldor Industrial Motor, 1/2 horse power, 1725 rpm, 230/460 V, 2/1 amps, 60 Hz, 3 phase. Browning Gear Reducer, 30.1 ratio, 57.3 rpm [final]. Pallet Dispenser Pneumatic Scissor Lift, base dimensions: 36 inches length x 34 inches height. Pallet Stacker Control Panel with Allen-Bradley SLC 5/04 CPU Controls and Allen-Bradley SLC500 Power Supply. Pallet Stacker aperture/clearance: 6 feet 4 inches length x 3 feet 2 inches width x 5 feet height. Overall dimensions: 41 feet 8 inches length x 12 feet width x 8 feet 2 inches height [ACN1750].
Stock No: fpe_DTTC2002.   |   Mfg: Girton/Pasco  |   Model: CW10PS / Series 5000  |   S/N: fpe_97092401

Used 1998 Girton Pallet Washer. Model: CW10PS. Serial Number: 97092401. Originally installed at Tropicana. This system washes wooden pallets up to 72 inches length x 7-1/2 inches width at the rate of 60 to 180 per hour. Features include: Partial stainless steel construction, variable-speed conveyor that dispenses and carries pallets through in vertical positions, automatic steam temperature controls and thermometer for delivery of water at consistent temperatures. Side access door allows easy entrance for cleaning and inspection. The Girton pallet washer protects and extends pallet life as well as improving plant sanitation and is compatible with Pasco’s Series 5000 Pallet Dispenser / Stacker System. Overall dimensions: 24 feet 8 ¼ inches length x 3 feet 5 ½ inches width x 7 feet 3 inches height. [ACN899].
Stock No: fpe_DTTC2002C.  |   Mfg: Girton  |   Model: CW10PS  |   S/N: fpe_97092401

Used 1990 G.J. Olney Flotation Washer. Serial Number: 926 G 70. Motor: 7.5 horse power, 1165 rpm, 460 V, 10 amps, 60 Hz, 3 phase. Deming pump, 10 inches diameter flange with [8] holes, center to center: 9 inches Three stages: 1st Washer/Divider, 2nd Flotation/Divider, 3rd Exit/Divider. Washer/Divider platform: 92 inches length x 60 inches width x 5 inches height. [14] Sections: 4-1/2 inches width x 32 inches L. Flotation/Divider: 60 inches length x 26 inches width. Exit height: 47 inches height. Recirculation water system. Water inlet: 3/4 inches pipe. Outlets: 1st stage: [2] inches threaded female, 3rd stage: [3] 2-1/2 inches threaded female. Overall dimensions: 98 inches length x 87 inches width x 71 inches height. [BC].
Stock No: fpe_SSLP182.5a  |   Mfg: G.J. Olney  |   Model:   |   S/N: fpe_926 G 70

Used 1989 Douglas Machines Corp. Stainless Steel Walk-in Tray Washer. Model: 1527. Interior Opening: 46 inches length x 30 inches width x 77.5 inches height. [1] Square D industrial transformer, [2] Omron wash and rinse timers. Designed as a walk-in type, stainless steel batch washer and sanitizer, the model 1527 can be used with single oven cooling racks, pots and utensils, and wide varieties of pans and trays found in the bakery, meats and candy industries. It features live steam heating for washing and an electric booster heater for rinsing. Inlets/Outlets: [1] 10 inches diameter vent, [1] 1-1/2 inches diameter port, [1] 3/4 inches diameter port. Overall dimensions: 4 feet 4 inches length x 4 feet 1 inches width x 8 feet 7 inches H.[ACN202].
Stock No: fpe_RGMB171.4  |   Mfg: Douglas Machines Corp.   |   Model: 1527  |   S/N: fpe_89-1281

Used Hobart Commercial Dishwasher. Model: UW50. Serial Number: 85-1023016. Inside dimensions: 28-1/2 inches length x 16-1/2 inches width x 14 inches height. Hot water sanitizing: 150 °F [wash temperature], 132 sec [wash cycle], 180 °F [rinse temperature], 24 sec [rinse cycle], building supply flow pressure: 20 +/- 5 psi. Chemical sanitizing: 120 °F [wash temperature], 132 sec [wash cycle], 120 °F [rinse temperature], 24 sec [rinse cycle], building supply flow pressure: 20 +/- 5 psi. Sanitizing solution and rate: 5.2 % sodium hypochlorite [bleach] solution, 20.8 ml within 24 sec. [max]; 8.4 % sodium hypochlorite [bleach] solution, 13 mL within 24 sec. [max]. Unit is equipped with [4] 3/8 inches diameter x 21 inches length rotating spraybars each with [8] nozzles and [4] 4 inches width x 21 inches length rotating spraybars. 14 inches length x 3 inches width x 10 inches height basket [foreign particles]. Can accept upto 16 full sized sheet pans or 140 quart mixing bowl. Electrical requirements: 208 V, 20.3 amps, 60 Hz, 3 phase. Centrifugal Pump with Motor, 5.4 horse power, 3460 rpm, 208-360 V, 15/8.8 amps, 3 phase. Inlets: [1] 3/4 inches diameter port [water/chemical sanitizer]. Outlets: [1] 1 inches diameter overflow port, [1] 2 inches diameter discharge. Overall dimensions: 4ft. length x 2 feet 10 inches width x 6 feet 6 inches height.[h17][ACN169].
Stock No: fpe_ENAE59256.  |   Mfg: Hobart  |   Model: UW50  |   S/N: fpe_85-1023016

Used 1996 Pollution Control Products, Inc. IGG Series Controlled Pyrolysis® Cleaning Furnace. Model: IGG94. Furnace compartment capability: 94 square feet at 350K BTU. Includes Honeywell controls and Truline chart recorder and [2] Midco International Incinomite gas burners, model J82DS. Respective maximum and minimum input ranges: 290K -100K BTU/Hr. The IGG series cleaning furnace uses natural gas at temperatures reaching 900ºF to burn off [pollution free] polymers, adhesives and chemicals from screws, dies, breaker plates and other metal tools. Uses natural gas running at 900ºF.Overall dimensions: 9 feet 11 inches L x 5 feet 7 inches W x 5 feet 8 inches H.[ACN324].
Stock No: fpe_ABCC03  |   Mfg: Pollution Control Products, Inc.  |   Model: IGG94  |   S/N: fpe_4755

Used 1996 Pollution Control Products, Inc. IGG Series Controlled Pyrolysis® Cleaning Furnace. Model: IGG94. Furnace compartment capability: 94 square feet at 350K BTU. Includes Honeywell controls and Truline chart recorder and [2] Midco International Incinomite gas burners, model J82DS. Respective maximum and minimum input ranges: 290K -100K BTU/Hr. The IGG series cleaning furnace uses natural gas at temperatures reaching 900ºF to burn off [pollution free] polymers, adhesives and chemicals from screws, dies, breaker plates and other metal tools. Uses natural gas running at 900ºF.Overall dimensions: 9 feet 11 inches L x 5 feet 7 inches W x 5 feet 8 inches H.[ACN324].
Stock No: fpe_ABCC04  |   Mfg: Pollution Control Products, Inc.  |   Model: IGG94  |   S/N: fpe_4064

Used [3] Fend-all Emergency Eyewash. Model: 130-00. SN: 354700, 203934. [1] Overall dimensions: 1 feet length x 10.5 inches width x 1 feet 8 inches height. [2] Overall dimensions: Overall dimensions: 1 feet 1 in length x 1 feet 4 inches width x 1 feet 10 inches height.
Stock No: fpe_MDFC198.a  |   Mfg: Fend-All  |   Model: 130-00  |   S/N: fpe_354700

Stock No: fpe_SCJC183.5  |   Mfg: American Sterilizer Company  |   Model: 57CR  |   S/N: fpe_309784

Used 1997 Paul Mueller PyroPure® Clean Steam Generator. Model: PSG P2002. Serial Number: 193232-1. Materials of construction include: 316 stainless steel for the heat exchanger, vessel, feed water and product contact points. Allen Bradley SLC 150 Programmable Controller. 1996 Mueller Shell and Tube Heat Exchanger: [128] 1/2 inches diameter x 35 inches length multi-tubes. Single Pass. Heat Transfer Surface Area: 48 square feet Shell Side: MAWP: 125 psi @ 355 °F. MDMT: 32 °F @ 125 psi. Tube Side: MAWP: 125 psi @ 355 °F. MDMT: 32 °F @ 125 psi. Inlets: [1] 2 inches diameter S-line fitting [water], [1] 3 inches diameter port. [steam]. Outlets: [1] 2 inches diameter S-line fitting [water], [1] 3 inches diameter port [steam]. 1996 Mueller Vessel. MAWP: 125 psi @ 355°F. MDMT: 32°F @ 125 psi. Inside straight wall dimensions: 9 inches diameter x 66 inches height. Inlets: [1] 3 inches diameter The PyroPure® pure steam generator is capable of producing pyrogen-free pure steam that, when condensed, meets all U.S. Pharmacopoeia [USP] requirements for use in autoclaves, critical area humidification, and routine steam-in-place [SIP] sterilization. Overall dimensions: 4 feet 10 inches length x 3 feet 3 inches width x 7 feet H.[ACN870].
Stock No: fpe_EELD563.1  |   Mfg: Paul Mueller  |   Model: PSG P2002  |   S/N: fpe_193232-1

Used Corty Steam Cleaner. Model 5301, Serial Number 159445. Maximum discharge pressure: 3,000 psi. Maximum pumped fluid temperature: 75 °C/167 °F. Gas fired. 230 V, 3 phase, 28 amps, BTU 510,000 per hour. Input manifold pressure: 5 inches width. C., 12 inches width. C. Motor: Cat No. M3313T, Spec 37B01X33, frame 215 T, 10 horse power, 208-230/460 V, 30/28/14 amps, 1,725 rpm, 60 Hz. Pump T series 47 TS2021. Maximum speed: 1,570 rpm. Overall dimensions: 66 inches length x 29 inches width x 54 inches height.[acn97a].
Stock No: fpe_BWMC071.4  |   Mfg: The Hotsy Corporation  |   Model: 5301  |   S/N: fpe_159445

Used Klenzade Super Foamer. Model: SPR FMR 2S. Serial Number: 07/19/96 002309. Air supply: 40-125 psi. Water pressure: 50-300 psi. Inlets: [1] 1/2 inches male pipe thread [water supply], [1] 3/8 inches female pipe thread [air supply]. Outlets: [1] 1/2 inches female pipe thread. Overall dimensions: 22 inches length x 14 inches width x 5 inches height.[acn8]
Stock No: fpe_OI179.  |   Mfg: Klenzade  |   Model: SPR FMR 2S  |   S/N: fpe_07/19/96 002309

Used Klenzade Super Foamer. Model: SPR FMR 2S. Serial Number: 04/08/98 000198. Air supply: 40-125 psi. Water pressure: 50-300 psi. Inlets: [1] 1/2 inches female pipe thread, [1] 3/8 inches female pipe thread [air supply]. Outlets: [1] 1/2 inches male pipe thread. Overall dimensions: 21-1/2 inches length x 14 inches width x 5 inches height.[acn8].
Stock No: fpe_DCBJ058.a  |   Mfg: Klenzade  |   Model: SPR FMR 2S  |   S/N: fpe_04/08/98 000198

Used Wet reel stainless steel, 36 inches x 12 feet with screen grating, trunions and electric drive. SOLD
Stock No: fpe_42a-SC-9721  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Corty Steam Cleaner. Baldor Motor: Cat No. M3313T, Spec. 37B10Y514H1, 10 horse power, 1,760 rpm, 208-230/460 V, 28.2 amps, 60 Hz, 3 phase, 215 frame. GP Carwash Series Pump: Model CW2004. Overall dimensions: 55 inches length x 22 inches width x 58-½ inches height.
Stock No: fpe_BWMC068.1a  |   Mfg: Corty  |   Model:   |   S/N: fpe_

Used Karcher High Pressure Washer. Maximum discharge pressure: 1500 psi [5 gallons per minute]. Runs on natural gas. Equipped with high pressure washer pump, burner and heating coils, electric motor, together with all the necessary controls and connections for use with electricity, natural gas, or LPG and pressurized water source. Model HDS 940, 230 VAC, 1 and 3 phase, 30 amp. Motor: 5.0 horse power, 330 gallons per hour, pressure 25 to 70 psi. Inlet: 1 inches Outlet: 1 inches Overall dimensions: 42 inches length x 37 inches width x 58 inches height.
Stock No: fpe_BWMC069.1  |   Mfg: Karcher  |   Model:   |   S/N: fpe_

Used Corty Cleaning System. Model 5301. Gas fired. 230 V, 28 amps, 3 phase. General Pump: T Series 47, Model TS 2021. Baldor Motor: Cat No. M3313T, Spec. 37B01X33, frame 215 T, 10 horse power, 208-230/460 V, 30/28/14 amps, 1,725 rpm, 60 Hz, 3 phase, Class B.[acn97a].
Stock No: fpe_BWMC073.4  |   Mfg: Corty  |   Model: 5301  |   S/N: fpe_

Used Foamatic Cleaning System. Model: SCCS-1000. Stainless steel construction. Foam/Rinse/Sanitize cycles. Temperature rated to 200 °F. Includes [5] discharge ports: [2] Foam, [2] Rinse, [1] Sanitize. Cat Pump, Model: 1010, capacity: 12 gallons per minute, pressure range: 100 to 700 psi. Leroy Somer Motor, 5 horse power, 1725 rpm, 230/460 V, 4.1/7.2 amps, 60 Hz, 3 phase. Inlets: [2] 3/4 inches diameter NPT [male]. Outlets: [4] 3/4 inches diameter FNPT. Overall dimensions: 45 inches length x 23 inches width x 44 inches height.[h17][ACN98].
Stock No: fpe_CC-967.1  |   Mfg: Foamatic  |   Model: SCCS-1000  |   S/N: fpe_

Used Fruit Washer. Maximum aperture/clearance: 24 inches width x 5 inches height. Infeed height: 30-1/2 inches Exit height: 37 inches height. Outlets: [1] 40 inches length x 19 inches W, [1] 30 inches diameter discharge. Overall dimensions: 52 inches length x 26-1/2 inches width x 43 inches height.
Stock No: fpe_DENF004.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Hot Water Wash Tank-10 Gallon with Conveyor. Belt width 12 inches Effective belt length: 15 inches L. Maximum aperture/clearance: 12 inches width x 11 inches height. Table is equipped with floater and strainer baskets. Centrifugal Pump with Baldor Motor, 1/2 horse power, 3450 rpm, 208/230/460 V, 1.9-1.8/.9 amps. Inlets: [1] 1/2 inches diameter male ferrule. Outlets: [1] 1 inches diameter [tank]. Overall dimensions: 46-1/2 inches length x 19-1/2 inches width x 38-1/2 inches height.
Stock No: fpe_DPFI217B.2a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Tanker Sprayball Unit. Base dimensions: 22 inches length x 14-1/2 inches height. Tube length: 45 inches Inlets: [1]: 2 inches threaded fitting. Overall dimensions: 24 inches length x 24 inches width x 60 inches height.
Stock No: fpe_HDGF057.7a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Tanker Sprayball Unit. Base dimensions: 22 inches length x 14-1/2 inches height. Tube length: 45 inches Inlets: [1] 2 inches threaded fitting. Overall dimensions: 24 inches length x 24 inches width x 60 inches height.
Stock No: fpe_HDMD080.4a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Wash Basket. Inside dimensions: 19 inches diameter x 5 inches height. Expanded metal perforation size [small]: 1-1/2 inches length x 1/2 inches width. Expanded metal perforation size [large]: 3-1/2 inches length x 2-1/2 inches width. Overall dimensions: 27 inches diameter x 6 inches height.
Stock No: fpe_HDYA026.1a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Wash Basket. Inside dimensions: 17-1/2 inches length x 6 inches height. Mesh bottom. Overall dimensions: 20-1/2 inches diameter x 10 inches height.
Stock No: fpe_HDYA026B.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used [2] Stainless Steel Wash Baskets. Inside dimensions: 14-1/2 inches length x 8-1/2 inches width x 7-1/2 inches height. Expanded metal perforations: 3/4 inches length x 1/4 inches width. Overall dimensions: 15-1/2 inches length x 8-1/2 inches width x 7-1/2 inches height.
Stock No: fpe_HDYA163.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Bradley Eyewash Station. Spray jet diameter: 2 inches Bowl diameter: 6 inches Overall dimensions: 10 inches length x 9 inches width x 10 inches height.
Stock No: fpe_KWBF221.a  |   Mfg: Bradley  |   Model:   |   S/N: fpe_

Used [5] Slew Sheets of Board. Nudo Fiberlite. 0.090 textured. Class C. Overall dimensions: 8 feet length x 4 feet width.
Stock No: fpe_KWBF760.a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used 1998 Klenzade CIP Foamer Cleaning System. Model: C Foamer-Special. Project No: FA1735. Wilden M Series Diaphragm Pump. Ampco Centrifugal Pump, Model: 1-1/4 x 1 KC2, Serial Number: CC-18989-1-1, impeller diameter: 5-1/2. Baldor Industrial Motor, 2 horse power, 3450 rpm, 208-230/460 V, 6.2-5.4/2.7 amps, 60 Hz, 3 phase. Lumenite 3-level Indecator Probe. 16 inches length x 16 inches width manway. Tank inside dimensions: 24-1/2 inches length x 24 inches width x 28 inches height. Tank capacity: 69 gallons. Inlets: [1] 2 inches diameter S-line fitting, [1] 1-½ inches NPT. Outlets: [1] 4 inches diameter tube [tank overflow], [1] 2 inches diameter S-line discharge. Overall dimensions: 55 inches length x 32 inches width x 72-1/2 inches height.
Stock No: fpe_NPPC128.  |   Mfg: Klenzade  |   Model: C  |   S/N: fpe_

Used Creamery Package Drop-In Tanker Spray Washer. Spray washer is attached to a 21 inches diameter vented manway cover. Center sprayball for top washing. Sits 38 inches deep in tanker. Inlets: [1] 2 inches diameter ACME fitting. Outlets: [6] 1 inches diameter vents. Overall dimensions: 21 inches diameter x 46 inches height. [ACN23]
Stock No: fpe_OI227.  |   Mfg: Creamery Package  |   Model:   |   S/N: fpe_

Used Hobart Commercial Dishwasher. Product clearance: 22 inches length x 18 inches height. Side access dimensions: 22 in length x 13-1/2 inches height. Power supply: 200 V. Hobart Motor with pump, 2 horse power, 1725 rpm, 200-230 V, 5.4 amps, 60 Hz, 3 phase. Inlet: [1] 3 inches diameter port. Outlets: [1] 2 inches diameter FNPT discharge port, [1] 3/4 inches diameter port, [1] 3 inches diameter MPT. Overall dimensions: 61-1/2 inches length x 37 inches width x 65 inches height.[h17].
Stock No: fpe_OI246.  |   Mfg: Hobart  |   Model:   |   S/N: fpe_

Used Stero Commercial Dishwasher. Model: SC 20-2. Product clearance: 20-1/2 inches width x 15-1/2 inches height. Equipped with a Eco-temp 300 System, manual control switches, start/stop push buttons. Power supply: 230 V, 11.2 amps, 12.0 amps [max], 60 Hz, single phase. [2] Century Motors, 3/4 horse power, 3450 rpm, 230/460 V, 5.6/11.2 amps, 60 Hz, 3 phase. Stero door-type washers are compact, efficient warewashing machines. Powerful cleaning action with revolving spray arm. [3] Access doors- [2] 21 inches width x 15-1/2 inches height and [1] 19-1/2 inches width x 17 inches height. [2] 20 inches diameter rinsers. Overall dimensions: 54 inches length x 28 inches width x 62 inches height [72 inches height when access doors are opened]. [ACN79].
Stock No: fpe_OI250.  |   Mfg: Stero  |   Model: SC 20-2  |   S/N: fpe_

Used Tanker Spray Ball. Ball Diameter: 4-1/2 inches Tube length: 40 inches Inlet: [1] 2 inches Acme Fitting. Outlet: [2] 1-1/2 inches Overall Diameter: 21-1/2 inches Overall length: 59-1/2 inches
Stock No: fpe_OI254.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Holden Bros. Inc. Dual Sprayball. Model: SB1. Capacity: 76 gallons per minute. Inlets: [1] 1-1/2 inches diameter S-line fitting. Overall dimensions: 28 inches length x 4 inches width x 36 inches height.
Stock No: fpe_SMPP087.2a  |   Mfg: Holden Bros. Inc.  |   Model: SB1  |   S/N: fpe_

Used Stainless Steel Half Round Sink. Unit has 2 sink compartments, and [1] side tray. Inlets: [2] 2 feet 4-3/4 inches length x 1 feet 6-1/4 inches width open top. Outlets: [2] 1-3/4 inches drain. Sink dimensions: [2] 2 feet 4-3/4 in length x 1 feet 6-1/4 inches width x 1 feet deep. Overall dimensions: 6 feet 4-34 inches length x 1 feet 11-5/8 in width x 2 feet 11 inches height.
Stock No: fpe_SWC122a.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_TACJ0368.1a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_TACJ0372.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_TACJ0390.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2009 food-processing-equipment.biz - All Rights Reserved.