Stainless Steel Paddle Blender- 300 Cu. Ft. Number of compartments: 5. Compartment dimensions: (1st) 4 ft. 1 in. L x 3 ft. 11 in. W, (2nd) 2 ft. 9 in. L x 3 ft. 11 in. W, (3rd) 3 ft. 1 in. L x 3 ft. 11 in. W, (4th) 3 ft. 11 in. L x 3 ft. 11 in. W, (5th) 6 ft. 4 in. L x 3 ft. 11 in. W. Removable dividers: 3 ft. 11 in. L x 4 ft. 3 in. W. Stainless steel cover dimensions: 15 ft. 4 in. L x 4 ft. 5 in. W. Paddle dimensions (ea): 8 in. L x 6 in. W. Warren Fluid Power Hydraulic Motor, Model: M25X978BIER12-7TLIL25-1, S/N: 8806-0167. Dodge Gearbox, Size: TDT6. Inlets: (1) 1-1/2 in. dia. Acme, (1) 2 in. dia. Acme, (1) 3/8 in. dia. port, (1) 1 in. dia. port, (1) 2 in. dia. port, (1) 1-1/2 in. dia. sprayball port, (2) 1-1/2 in. ports. Outlets: (6) 2 in. dia. flanged ports, (1) 3 in. dia. Acme discharge port. Overall dimensions: 24 ft. 2 in. L x 4 ft. 9-1/2 in. W x 6 ft. 2 in. H.
Stainless Steel Paddle Blender- 400 Cubic Feet. Outlet: 3-½ in. threaded. Inside dimensions: 18 ft. L x 47 in. W x 66 in. H. Overall dimensions: 22 ft 10 in. L x 53-½ in. W x 77 in. H.
Circular Paddle Blender, 70 Cubic Feet, stainless steel. Blender has unit with (9) paddles 33 in. long and (6) wash pipes 3/4 in. diameter. (1) 4 in. bottom outlet and (3) 2 in. bottom outlets. Inside dimensions 125 in. L x 36 in. W x 32 in. D. Shaft is 125 in. L and the diameter of the shaft is 1-3/4 in. Overall dimensions 36 in. diameter x 125 in. L x 42 in. H, mounted on (6) 13 in. legs.
Stainless Steel Dual Paddle Blender with Screw Auger Discharge
Mfg:
Model:
Stock No. tGHFI01.
Serial:
Stainless Steel Dual Paddle Blender with Screw Auger Discharge. Maximum capacity: 4.27 cu. ft. Minimum capacity: 2.92 cu. ft. Auger screw diameter: 5-1/2 in. dia. Auger screw housing diameter: 5-3/4 in. Auger screw length: 30 in. Baldor Industrial Motor: 5 hp, 1725 rpm, 230/460 V, 13.2/6.8 amps, 60 Hz, 3 phase. Motor Drive: no nameplate information. Inlets: (1) 2 in. dia. FPT. Outlet: (1) 5-3/4 in. dia. (4) Casters for easy positioning. Overall dimensions: 62 in. L x 19 in. W x 34 in. H.
Dough Mixer. Dimensions: 42 in. L x 37 in. W x 40 in. H. Blender: 22 in. L x 1-½ in. to 2-½ in. dia. Pulley size: 24 in. Pulley motor: 20 hp, 1,175 rpm, 208 V. Hydraulic gear box: 3/4 hp, 1,725/1,425 rpm, 208-230/440 V, 2.6/1.3 amps. Overall dimensions: 89 in. L x 44 in. W x 70 in. H.
Paddle Blender. Paddle size: 2 in. L x 2 in. W. (3) 80 in. L x 2-3/4 in. W side scrapers blades. (3) 19-1/2 in. L x 11 in. W access doors. Reliance Electric Motor, 10 hp, 1755 rpm, 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Foote-Jones Powertech Gear Drive, 40 rpm (final). Inlets: (1) 3/4 in. dia. NPT (jacket), (1) 9-1/2 in. dia. infeed with a 13-1/2 in. dia. flange. Outlets: (1) 3/4 in. dia. NPT (jacket), (1) 10 in. L x 9 in. W discharge. Overall dimensions: 10 ft. 10-1/2 in. L x 32 in. W x 36 in. H.
Custom Metal Craft Paddle Blender- 3 Cu. Ft. Model: SRB. S/N: 2632-1. 90° Tilt capability. (6) 9 in. L x 2 in. W paddles. Lincoln Electric Motor, 3 hp, 1750 rpm, 230/460 V, 230/460 V, 8.4/4.2 amps, 60 Hz, 3 phase. Dana Hydrostatic Speed Variator, Model: 1114-001, S/N: 830188. Inlets: (1) 1-1/2 in. dia. NPT (product). Outlets: (1) 3/8 in. FNPT (discharge). Overall dimensions: 4 ft. 4-1/2 in. L x 2 ft. 3 in. W x 5 ft. H.
Brabender Delta Stainless Steel Jacketed Blender. Hitachi motor, 1/2 hp, 1420-1700/1710 rpm, 200-200/220 V, 2.3-2.0/2.0 amps, 50-60/60 Hz. Ringcone Variable Speed Drive, Model: SCM-400C-G11B. Stainless steel base. Inlets/Outlets: 5-1/2 in. L x 3-1/2 in. W. Overall dimensions: 38 in. L x 30-1/2 in. W x 12 in. H.
Paddle Blender- 2.1 Cu. Ft. Inside dimensions: 22 in. L x 11 in. W x 15 in. H. Blender is equipped with (6) 4 in. L x 2-1/2 in. W scraper blades. Overall dimensions: 33 in. L x 11-1/2 in. W x 15-1/2 in. H.
CF Gilco Gilson Concrete Mixer. Model: 59015B 49095. S/N: 7140 J1 580. Pulley ratio: 0.14. Driver pulley: 2 in. dia. Driven pulley: 1 ft. 2 in. dia. Final rpm: 246.43. Westinghouse Electric Motor, 1/2 hp, 1725 rpm, 115 V, 7.5 amps, 60 Hz, single phase. Overall dimensions: 3 ft. 4 in. L x 3 ft. W x 4 ft. 4 in. H.
CF Gilco Gilson Concrete Mixer. Model: 59015C. S/N: 9007379. Pulley ratio: 0.14 . Driver pulley: 2 in. dia. Driven pulley: 1 ft. 2 in. dia. Final rpm: 246.43. Dayton Electric Motor, 1/4 hp, 1725 rpm, 115/230 V, 4.6/2.3 amps, 60 Hz, single phase. Overall dimensions: 3 ft. 4 in. L x 3 ft. W x 5 ft. H.(ACN11).
CF Gilco Gilson Concrete Mixer. Pulley ratio: 0.14. Driver pulley: 2 in. dia. Driven pulley: 1 ft. 2 in. dia. Final rpm: 246.43. Dayton Electric Motor, 1/4 hp, 1725 rpm, 115/230 V, 4.6/2.3 amps, 60 Hz, single phase. Overall dimensions: 3 ft. 1/2 in. L x 2 ft. W x 5 ft. 6 in. H.(ACN11).
Paddle Blender, 20 cu ft stainless steel single shell, 5 hp motor 230-460 W 58 final rpm, center bottom discharge, 4 in. clamp outlet, outlet I.D. 3-3/4 in., outlet O.D. 4-5/8 in., 35 in. inner W x 54-1/2 in. inner L x 39 in. inner H, 11 in. bottom outlet clearance, 66 in. H x 70 in. W x 77 in. L.
SOLD
SOLD Jacketed Blender Stainless Steel - 1,000 Gallon SOLD
Mfg:
Model:1000UPB
Stock No. 175.BASF608.96a
Serial: C6635B
1,000 Gallon Jacketed Blender, S/N C6635B, Year 1998, Model 1000 UPB, National Board 7473, mawp 90 psi 332 ?F, mdmt -20 ?F 90 psi, 3 in. Outlet, 1-3/4 in. Jacket Inlet, Flip Top covers, Inner Dimensions 72 in. H x 83 in. L x 67 in. W, Paddles 32 in. from center x 5 in. W with 12 in. x 5 in. End Plates, Drive 30CT hp 230YY/460Y Voltage 1,760 rpm, 122.9 Ratio, 14.32 Final rpm, 132 in. L x 76 in. W x 98 in. H
SOLD
Paddle Blender, manufacturer unknown, stainless steel Paddles each have a drive motor 1 hp 230/460 volt and reduction ratio of 1.25 to 1. Blender has a discharge of 3 in. dimensions 70 in. L x 36 in. W x 41 in. H. Inside dimensions 48 in. L x 21 in. W x 23 in. H Overall dimensions 73 in. L x 41 in. W x 42 in. H with a 3 in. outlet on bottom.
SOLD
SOLD - Roque Mixer, 8 cubic feet, (1) 4 in. outlet on bottom with a flow valve. SE Eurodrive Inc. Motor, Type: DF14DT80N4, 1 hp, 460/2,260 rpm, 230/460 volt, 3.9/1.95 amp, 60 hz, Gear box in 460-2,260 rpm, out 13.3-66rpm, ratio 34.51.Inside dimensions 18 in. W x 36 in. L x 23-1/2 in. H. Overall dimensions 38 in. W x 72 in. L x 70 in. H. - SOLD
sold Lasar Butcher Boy Paddle Blender 8 Cubic Feet sold
Mfg: Lasar
Model:250
Stock No. WBC02
Serial: 363
Lasar Butcher Boy Paddle Blender, 8 cubic feet, Model 250, S/N 363. 2 hp, 3 phase, 220 volt, 60 hz, 5.6 amp, 48 rpm. Temperature rating 40 degree Celsius. Unit has no outlets and must be turned over for discharge and cleaning. Single acting Agitor. Inside dimensions 20 in. W x 31 in. L x 23-1/2 in. H. Overall dimensions 29 in. W x 40 in. L x 40 in. H. has to be turned over for discharged and cleaning.
SOLD
SOLD - Paddle Blender 40 Cubic Feet - SOLD
Mfg:
Model:
Stock No. CCIS001
Serial:
Paddle Blender 40 cubic feet. Gear Box: Boston Reductor Gear Works. Cat No. AT38, S/N 44113, Ratio 40-1, .71hp, 1,300/1,200 rpm. Dayton Motor, Model 2N935L, 2.0 hp, 3 phase, Nema design B, 184 frame, 1,760 rpm, 60 hz, 10SF, Insul Class A, Motor Ref. GO03A/C90To41004F. Duty: Cont. max AMB 40 ° C. Max KVAR 0.7. Shaft end BRG 6206, 208-220/440 volt, 6.4-6.2-3.1 amps. The paddle blender has a square outlet that can be opened and closed manually; it is 5-½ in. by 5-½ in. Inside dimensions: 26 in. W, 94 in. L, 26 in. H. Overall dimensions: 34 in. W, 115 in. L, 56 in. H.
SOLD
Paddle blender, cooker / blender, 16 in. D x 9 ft. L, cs, jacketed, steam injection with drive.
SOLD
SOLD Paddle Mixer / Lowe Stainless Steel 30 Cubic Feet SOLD
Mfg: Lowe
Model:
Stock No. 85.SP6761
Serial:
Paddle mixer / Lowe 30 cubic foot, 304 stainless steel construction with sanitary design, 3 in. bottom center sanitary discharge and 4 in. side discharge, 37 in. W x 48 in. L x 38 in. D, hydraulic drive, S/N 6378-85, very good condition.
SOLD
SOLD Marshall Paddle Blender 65 Cubic Feet SOLD
Mfg: Marshall
Model:
Stock No. CJR1811
Serial:
Marshall Paddle Blender, stainless steel with open top and multiple rods lid cover and mounted on 15 in. legs. Drive motor is Syncrogear 1.5 hp 230/460 volt, 1,760 rpm with gear reduction of 36.6 to1. Paddles are driven by chain gear.Tank dimensions: 44 in. H x 45 in. diameter x 60 in. L. Overal dimensions 113 in. L x 45 in. diameter x 66 in. H.
SOLD
SOLD Leland Southwest Paddle Blender 5 Cubic Feet SOLD
Mfg: Leland Southwest
Model:
Stock No. CJR1812
Serial: 051405.c.
Leland Southwest Paddle Blender- 5 cu. ft. Stainless steel. S/N 051405.c. Gear motor- 1 hp, 230/460 V. Control box includes start, stop, and jog buttons. The mixer can pivot up to 90 degrees to remove product by depressing the jog button. Overall dimensions: 52 in. L x 27 in. W x 39 in. H.
SOLD
Tilting Paddle Blender- 40 Gallon. 18 cu ft capacity. (14) blending paddles. Removable clamped lid. Motor: ¾ hp; 14 final rpms, 115/230 V, 10.8/5.4 amps, 60 Hz. Inlets/outlets: (1) 48 in. L x 24 in. W opening, (1) 4 in. central outlet with threaded fitting. Overall dimensions: 75 in. L x 34 in. W x 48 in. H.
SOLD
SOLD Leland Southwest Paddle Blender- 35 Gallon SOLD
Mfg: Leland Southwest
Model:
Stock No. OI147.
Serial:
Leland Southwest Paddle Blender- 35 Gallon. 304 stainless steel. (5) blending paddles. Removable top lid. Motor: 2 hp, 1,725 rpm, 208-230/460 V, 6.4-6.4/3.2 amps, 60 Hz. Overall dimensions: 52 in. L x 25-1/2 in. W x 65 in. H.
SOLD
SOLD Willflow Paddle Blender Stainless Steel - 150 Gallon SOLD
Mfg: Willflow
Model:
Stock No. 60.IMS8572.30
Serial: 30506
Willflow Paddle Blender-150 Gallon. Stainless steel. S/N 30506. Natl Bd no. 3429. Jacket 90, vac. psi 333 °F, 2 outlets, outlet I.D. 1-1/2 in., outlet O.D. 1-3/4 in., 24 in. inner W x 36 in. inner L x 27 in. inner H, 8-1/4 in. bottom outlet clearance, 2 in. top jacket inlet inner diameter, 2-1/2 in. top jacket inlet outer dia, 54 in. L x 33 in. H.
SOLD
SOLD Will Flow Jacketed Paddle Blender 150 Gallon SOLD
Mfg: Will Flow
Model:
Stock No. CJR1813
Serial: 3429
Will Flow Jacketed Paddle Blender 150 Gallon. Stainless steel. S/N 3429. Manufacturer No. 30506. The jacket maximum pressure is 90 psi at 333° F. It has a lid and a temperature indicator plus an additional well connection. Mounted on 21 in. legs, drive motor is a Baldor 2 hp, 1,725 rpm with a worm gear reducer. Model 262WBM2A. S/N 47003561188. Reduction ratio of 15 to 1. The blender shaft is driven by a chain and sprocket. Inner dimensions 50 in. L x 27-1/2 in. W x 32 in. H. Overall dimensions 7 ft. L x 31-1/2 in. W x 51-1/2 in. H.
SOLD
SOLD Double Barrel Paddle Blender-70 Cubic Feet SOLD
Mfg:
Model:
Stock No. CJR1825
Serial:
Double Barrel Paddle Blender- 70 Cu. Ft. Stainless steel. Drive shaft pulleys: 17 in. dia with chain and pulley covers. (2) lids: 43 in. L x 21 in. W with manways. US Electric motor: S/N P830LT-2777, 1 hp, 1,745 rpm, 230/460 V, 3.6/1.8 amp, 60 Hz. Variable speed drive: S/N E74015223R021F, 2.0 max hp at 1,750 rpm, max torque 54. Frame 6, type VAM. (2) Barrels: 60 in. L x 36 in. dia. (2) Shafts: 1-3/4 in. dia. Compartments are connected by a 3 way valve. Overall dimensions: 84 in. L x 74 in. W x 74 in. H.
SOLD
Hobart Blender. Model: BL-20. 316 stainless steel. Max/min capacity: 66/58 cu ft. Weight capacity: 2000 lbs. Blender features dual 25 in. dia. x 60 in. L paddle blender shafts and 9 in. dia. x 60 in. L screw auger in 9-1/2 in. dia. housing. Inlets/outlets: (1) 60 in. L x 48 in. W infeed opening, (1) 11 in. dia. side discharge outlet with pneumatic closing lid. Elektrim Motor: 15 hp, 1755 rpm, 230/460 V, 60 Hz, 3 phase. Motor drive, no nameplate information. Overall dimensions: 95 in. L x 52 in. W x 80 in. H.
SOLD
FMC Paddle Blender- 16 Cu. Ft. 304 Stainless steel construction. Unit is equipped with a 23 in. dia. x 52 in. L rotating shaft with paddles. Paddle size: 7-3/4 in. L x 4 in. W. Lesson Washguard Motor, 2 hp, 1719 rpm. 208-230/460 V, 60 Hz, 3 phase. Variable speed drive. Allen Bradley control panel. Outlets: (1) 3 in. dia. discharge hose. Overall dimensions: 95 in. L x 30 in. x W 56 in. H.
SOLD Belam Paddle Blender-Approximately 30 Cubic Feet SOLD
Mfg: Belam
Model:DK23
Stock No. 195
Serial: 2754
Belam Paddle Blender- 30 Cu. Ft. Model DK23. S/N 02754. Unit requirements: 220 V, 60 Hz. Inside dimensions: 43 in. L x 36 in. W x 33 in. H. Paddles: (2) 35 in. L x 14-1/2 W. Outlet: (1) 2 in. dia. port. Overall dimensions: 48 in. L x 41 in. W x 72 in. H.
SOLD 1989 FPEC Vacuum Mixer/ Paddle Blender- 3000 lb SOLD
Mfg: FPEC
Model:814
Stock No. tFEC07.
Serial: 1409
1989 FPEC Vacuum Mixer/ Paddle Blender- 3000 lb. Model: 814, S/N: 1409. Stainless steel. Inside dimensions: 84 in. L x 53.5 in. W x 36 in. H. Blender inlet: 6 in. dia; (2) hinged lid outlets: 27 in. L x 21 in. W. Final mixer speed: approx. 6 to 25 rpm. CO2 injection capability. (2) SEW Varimot 15 hp motors: 230/460 V, 36/18 amps, 3 phase, sprocket ratio: 3.3:1. Teco Motor: 5 hp, 1750 rpm, 230/460 V, 13/6.5 amps, 60 Hz, 3 phase. Kinney vacuum pump, Model: LRC-100, S/N: 91-0826. Inlet /outlet: 1.5 in. Overall dimensions: 115 in. L x 75 in. W x 75.5 in. H. This Vacuum Mixer/Blender, Model 814, has a built-in variable speed control to adjust the mixing speed for processing different meat and poultry products to perfection. Vacuum loading of product available. Originally sold to McCartney Foods in Jackson Mississippi as a vacuum blender with CO2 injection capability. The base blender unit itself is around $85,000 with vacuum capability adds $15K. CO2 and controls add about 15K-20K.
SOLD FPEC Paddles Blender with Screw Auger Discharge- 85 Cu. Ft. SOLD
Mfg: Food Products Equipment Co.
Model:SLC-930
Stock No. tFEC06.
Serial: 540
FPEC Paddle Blender with Screw Auger Discharge- 85 Cu. Ft. Model: SLC-930. S/N: 0540. Stainless steel. Inside dimensions: 60 in. L x 36-1/2 in. W x 57 in. H including 15 in. H augmentation for auger screw. (3) Rotating paddles: 20 in. L x 17 in. W. Screw auger: 11 in. dia. x 72 in. L. Screw pitch: 12 in. Housing diameter: 12 in. (2) Allen Bradley limit switches. Hinged lid and walking platform with guardrail. Dayton Motor, 3 hp, 1730 rpm, 230/460 V, 9.0/4.5 amps, 60 Hz, 3 phase. Dayton Motor Drive, 38.44 gear ratio, 45 rpm (final). Drive Sprockets: (1) 3-1/2 in. dia. tensioner, (2) 5 in. dia., (1) 15 in. dia., (1) 24 in. dia. Inlets/outlets: (1) 3 in. S-line connection and (1) 12 in. side outlet. Overall dimensions: 97 in. L x 57 in. W x 88-1/2 in. H.
Walker Inline Blender- 120 GPM. Model SP, S/N 1240-7335. Capacity: 120 gpm. Reliance Motor, Cat No. M2333T, Spec 09A01-1086, frame 254T, Ser 4/80, 15 hp, 230/460 V, 38/19 amps, 1,760 rpm, 60 Hz, 3 phase. Inlets: 2 in.(top), 2 in. (middle). Outlet: 3 in. (bottom). Overall dimensions: 62 in. L x 38 in. W x 66-½ in. H.
