Used Heatcraft Bohn Low Temperature Freon Condensing Unit – 1.81 Tons

Used Heatcraft Bohn Low Temperature Freon Condensing Unit. Model: BZS0750L6C. Serial Number: T02F00726. Part No. 86514701. Nominal capacity: 1.81 tons or 26,540 Btuh with a -20F suction temperature and a 95F ambient temperature. Refrigerant: R-404a. Design pressure: 450/178 [hi/lo]. Power supply: 208-230 V, 60 Hz, 3 phase. Copeland scroll compressor, Model: ZF24K4E-TWC-551, Serial Number: 02F27533G, power supply: 7-1/2 horse power, 208-230 V, 60 Hz, 3 phase. Number of fans: 1. Fan diameter: 1 feet 10 inches Inlet: [1] 1/2 inches diameter port. Outlet: [1] 1/2 inches diameter port. Overall dimensions: 4 feet 1-1/2 inches length x 3 feet width x 3 feet 2 inches height. [ACN69a]

Used 2000 Kramer CTT Thermobank Condensing System- 3 Ton

Used 2000 Kramer CTT Thermobank Condensing System- 3 Ton. Model: CTT10300M44-G. Serial Number: M0078212-012. Refrigerant: R-404A. Design pressure lo/hi: 180/450 psig. Copeland Copelametic Screw Compressor, 3 horse power, 380-400/460 V, 5.8 RLA, 41.0 LRA, 50/60 Hz, 3 phase. For evaporator temperature ranges of -10 to 45 °F. Magnetek Fan Motor, 460 V, 1.3 FLA, 60 Hz, single phase. The Thermobank delivers more refrigeration with less energy consumption, less equipment, less installation and lower operating cost. Thermobank is available for all commercial and industrial applications. Less equipment is needed with Thermobank because it does more refrigeration in 24 hours than any other package system and also has the fastest defrost period [typically 5 to 10 minutes]. Inlets: [1] 1 inches port. Outlets: [1] 1/2 inches port. Overall dimensions: 40 inches length x 38 inches width x 43-1/2 inches height. [ACN68]. [h15].

Used 2000 Kramer CTT Thermobank Condensing System- 3 Ton

Used 2000 Kramer CTT Thermobank Condensing System- 3 Ton. Model: CTT10300M44-G. Serial Number: M0078212-011. Refrigerant: R-404A. Design pressure lo/hi: 180/450 psig. Copeland Copelametic Screw Compressor, 3 horse power, 380-400/460 V, 5.8 RLA, 41.0 LRA, 50/60 Hz, 3 phase. For evaporator temperature ranges of -10 to 45 °F. Magnetek Fan Motor, 460 V, 1.3 FLA, 60 Hz, single phase. The Thermobank delivers more refrigeration with less energy consumption, less equipment, less installation and lower operating cost. Thermobank is available for all commercial and industrial applications. Less equipment is needed with Thermobank because it does more refrigeration in 24 hours than any other package system and also has the fastest defrost period [typically 5 to 10 minutes]. Inlets: [1] 1 inches port. Outlets: [1] 1/2 inches port. Overall dimensions: 40 inches length x 38 inches width x 43-1/2 inches height.[h15][ACN68].

Used 1990 Trane Condensing Unit- 60 Ton

Used 1990 Trane Condensing Unit- 60 Ton. Model: RAUCC604BB031. Serial Number: J90E80888. Test pressure [hi/lo]: 450/300 psig. Power supply: 460 V, 60 Hz, 3 phase. Minimum ckt ampacity: 123 amps. Max. fuse size: 125 amps. [4] 3-D Scroll Compressors, power supply: 460 V, 26.3 RLA each, 142 LRA each, 60 Hz, 3 phase. [6] 26” diameter direct drive, propeller type fans. [6] Fan motors, 1 horse power each, 1.8 FLA each, 460 V, 1.8 60 Hz, 3 phase. [2] condenser coils 3 rows of 12 fins per inch. Inlets: [2] 2 inches diameter refrigerant discharge copper ports. Outlets: [2] 3/4 inches diameter refrigerant discharge copper ports. In addition to allowing the orbiting scrolls to touch in all three dimensions and form completely enclosed compression chambers, the Trane 3-D Scroll compressors offer very smooth and low torque compression cycles thus reducing wear and eliminating the need for pistons, connecting rods, wrist pins and valves. Spring isolators are standard on this model. Inlets: [2] 2 inches diameter refrigerant suction ports. Outlets: [2] 3/4 inches diameter refrigerant discharge ports. Overall dimensions: 9ft. 10 inches length x 7ft. 5 inches width x 6ft. 7in. height.[H15][ACN200].

Used Kramer Air Cooled Condensing Unit

Used Kramer Air Cooled Condensing Unit. Model: C3F22KSH, Serial Number: E07860. Refrigerant: R-22. Chiller barrel diameter: 6 inches Factory test pressure: high side 400 psi; low side 250 psi. Emerson Fan Motor: 1,075 rpm, 208-230 V, 1.3 amps, 60 Hz, 1 phase. Coplematic compressor: Model: ERF1-0311-TAD-800, Serial Number: 95C72883, 380-400/460 V, 50/60 Hz, 3 phase. Inlets/outlets: [1] 1/2 inches diameter copper tubing, [1] 3/4 inches diameter copper tubing. Overall dimensions: 43 inches length x 34 inches width x 40 inches height.

Used Bohn Condensing Unit - 5 Ton

Used 1993 Bohn Condensing Unit- 5 Ton. Model: DLH5H2ED. Serial Number: D93H37469. Nominal fin spacing: 9 fpi. Design pressure [hi]: 350 psi. Copeland 2-Cylinder Reciprocating Compressor, Model: 2DC3-0500-TFC, Serial Number: CT 93F 04324, 200/220-208-230 V, 22.3 RLA, 120 LRA. 50/60 Hz, 3 phase. Dual fan setup with [4] blades per fan. Fan blade size: 9 inches width x 6 inches width. [2] Emerson Fan Motors, 1/4 horse power, 1.8 amps, single phase. Inlets: [1] 1 inches inlet port. Outlets: [1] 1/2 inches outlet port. Overall dimensions: 48 inches length x 36 inches width x 33 inches height.[acn65].

Used Copeland Copelametic Freon Condensing Unit

Used Copeland Copelametic Freon Condensing Unit. Model: MRA2-0500-TFD. S/N: CT91D04018. Fan motor: ½ HP, 1100 RPM, 460 V, single phase, 2.1 A, 50/60 Hz. Overall Dimensions: 3 feet 2 inches L x 2 feet 4 inches W x 2 feet 5 inches H.[acn22a]

Used Bally Case & Cooler Air Cooled Condensing Unit

Used Bally Case & Cooler Air Cooled Condensing Unit. Model: FAZ-750. Serial Number: 83456. Fan diameter: 2 feet Copeland Copelametic 2-Cylinder Reciprocating Compressor, Model: 9RS2-0760-TFC, S/M: 8377761, power supply: 208-230 V, 29.3 FLA, 164 LRA, 60 Hz. Accumulator- 2 Gallon, inside straight-wall dimensions: 6 inches diameter x 1 feet 4 inches height. Oil Separator- 2.5 Gallon, inside straight-wall dimensions: 8 inches diameter x 1 feet height. Inlets: [1] 1-1/4 inches diameter suction port. Outlets: [1] 1-1/2 inches diameter discharge port. Overall dimensions: 6 feet 7 inches length x 2 feet 10 inches width x 4 feet 8-1/2 inches height.

Used Copeland Air Cooled Condensing Unit

Used Copeland Air Cooled Condensing Unit. Model: CSAH-0300-CAB-001N. Serial Number: 62L220U. Refrigerant: R-12, R-134A. Copeland 2-Cylinder Reciprocating Compressor, Model: 3RK20310 CAB, Serial Number: 62L2211, power supply: 230 V, 15 FLA, 70 LRA. Condenser, fins per inch: 9 fpi. Fan diameter: 2 feet General Electric Motor, 1/3 horse power, 825 rpm, 230 V, 2.4 amps, 60 Hz, single phase. [2] Refrigerant Receivers- 3 Gallon [ea.], dimensions: 6 inches diameter x 2 feet 2 inches L. Refrigerant Accumulator- 1.8 Gallon, dimensions: 6 inches diameter x 1 feet 3 inches L. Inlet: [1] 1-3/8 inches diameter port. Outlet: [1] 1/2 inches diameter compressor fitting. Overall dimensions: 3 feet 4 inches length x 2 feet 6 inches width x 2 feet 9 inches height.

Used Snyder General Corporation Air Cooled Condensing Unit – 27 Tons

Used 1993 Snyder General Corporation Air Cooled Condensing Unit. Model: ALP027C. Nominal tons: 27 [based on 95°F ambient air and 45°F SST]. [1] Copelametic 25 hp compressor, 460 V, 60 Hz, 39 A, 3 phase. [2] Emerson 1 hp fan motors, 1140 rpm, 200-230/460 V, 3.7/1.9 A, 60 Hz, 3 phase. [1] Magnetek 1 hp fan motor, 200-230/460V, 1140 RPM, 4-4/2 A, 60 Hz, 3 phase. [1] Crankcase heater 115V, 60 Hz, 0.87 A, single phase. R-22. Inlets/Outlets: [1] 1 ½ inch pipe, [2] 1 inch pipe. Overall dimensions: 7 feet 11 ½ inches L x 5 feet W x 3 feet 9 inches H.[h15].

Used 2005 Century Refrigeration Air Cooled Condensing Unit – 65 Tons

Used Century Refrigeration [RAE Corporation] Air Cooled Condensing Unit. Model: DM120L7. Rated for 65 tons [using R-404a] at 85°F ambient air, 0°F suction and 107°F condensing temperatures. Refrigerant: R-404a or R-507. [4] Copeland Copelametic compressors, models 6DT3 F11 ME-TSK-233, 480 V, 3 Phase. Accessories include: unit circuit breaker with thru door shut off, control circuit transformer 120V, unit phase failure monitor, TempRite oil separator with isolation valve and spare filter, liquid line drier with replaceable core and sight glass, suction filter with replaceable core, suction accumulator, suction vibrasorber, and a Wizard system controller. Approximate overall dimensions: 22 feet length x 8 feet width x 7 feet 10 inches H.[h15][ACN895].

Used Bally Case & Cooler Evaporator

Used Bally Case & Cooler Evaporator. Model: BF-400. Serial Number: 100808. Fins per inch: 6. Number of fans: 2. Fan diameter: 1 feet 5-1/2 inches [2] General Electric Motors. 1/2 horse power, 1725 rpm, 230 V, 2.5 amps, 60/50 Hz, single phase. Overall dimensions: 4 feet 1 inches length x 2 feet 5 inches width x 2 feet 5 inches height.

Used Copeland Freon Condensing Unit

Used Copeland Freon Compressor. Model: ARE25C3E-SAA-103. Refrigerant: R134A [freon]. Fan diameter: 8-1/2 inches Number of fans: 1. Power supply: 115 V, 25 amps, 60 Hz, single phase. Copeland condensor, Model: M2FH-0024-SAA-106. Max design pressure: 440 psig [hi] ,162 psig [low]. Max evap. temperature: 45° F. Power supply: 115 V, 4.47 amps, 60 Hz, single phase. Inlets: [1] 1/4 inches diameter port. Outlets: [1] 1/4 inches diameter port. Overall dimensions: 1 feet 2 inches length x 1 feet 2 inches width x 10 inches height.

Used 2000 Copeland Screw Low Temperature Compressor Package- 40 horse power

Used 2000 Copeland Screw Low Temperature Compressor Package - 40 horse power. Model: SHL2-2000-TWK-200. Serial Number's: 00L400018 and 00L4015. Semi-hermetic. Refrigerant: R-22. Maximum speed: 3500 rpm. Displacement: 2562 cubic feet per minute. Electrical requirements: 230/460 V, 81/41 amps. 2000 Standard Refrigeration Liquid Receiver Tank, Model: OA4088, Serial Number and Nat'l Bd: 34799, MAWP: 400 psi at 150 & 730°F, MDMT: 20 & 730°F at 400 psi. 2002 Standard Refrigeration Oil Separator, Model: 5803035, MAWP: 450 psi @ 150 °F, MDMT: 20 °F @ 450 psi. 2001 Dunham-Bush Shell and Tube Oil Condenser, Model: RX65, Serial Number: 010517011, shell side MAWP: 400 psi at 200 & 730°F, shell side MDMT: -50 &730°F at 400 psi, tube side MAWP: 400 psi at 200 & 730°F, tube sided MDMT: -50 & 730°F at 400 psi. Overall dimensions: 15 feet 2 inches length x 63 inches width x 94 inches height. [ACN61a-BC].

Used Heatcraft Bohn Low Temperature Freon Condensing Unit – 1.81 Tons

Used Heatcraft Bohn Low Temperature Freon Condensing Unit. Model: BZS0750L6C. Part No. 86514701. Nominal capacity: 1.81 tons or 26,540 Btuh with a -20ºF suction temperature and a 95ºF ambient temperature. Refrigerant: R-404a. Design pressure: 450/178 [hi/lo]. Power supply: 208-230 V, 60 Hz, 3 phase. Copeland Scroll Compressor, Model: ZF24K4E-TWC-551, Serial Number: 02E2460G, power supply: 7-1/2 horse power, 208-230 V, 60 Hz, 3 phase. [1] 1/3 horse power condenser fan motor. Fan diameter: 1 feet 10 inches Inlets: [1] 1/2 inches diameter port. Outlets: [1] 1/2 inches diameter port. Estimated weight; 824 pounds Overall dimensions: 4 feet 1-1/2 inches length x 3 feet width x 3 feet 2 inches height. [ACN69a]

Used Heatcraft Inc Climate Control Air Cooled Condensing Unit - 4.4 Ton

Used Climate Control Air Cooled Condensing Unit - 4.4 Ton. Copeland 2-Cylinder Reciprocating Compressor, Model: 2DL3-0750-TDF, Serial Number: CT 90J 03169 S, B/M: 211, capacity [medium temperature]: 52,800 Btuh, power supply: 380-420/460 V, 13.8 RLA, 8.5 LRA, 50/60 Hz, 3 phase. Number of fans: 2. Fan diameter: 2 feet [2] Emmerson Motors, 3/4 horse power, 1080 rpm, 460 V, 2.1 amps, 60 Hz, single phase. Evaporator, fins per inch: 12 fpi. Receiver- 10 Gallon, inside straight-wall dimensions: 8 inches diameter x 4 feet L. Cutler Hammer Heavy Duty Safety Switch, power supply: 600 VAC, 30 amps. Inlets: [1] 1 inches diameter compressor suction port. Outlets: [1] 1/2 inches diameter compressor discharge port. Overall dimensions: 5 feet 7 inches length x 4 feet 3-1/2 inches width x 3 feet 8 inches height.

Used Air Cooled Condensing Unit with Dunham-Bush Compressor

Used Air Cooled Condensing Unit. Dunham-Bush 4-Cylinder Reciprocating Compressor, Model: 50H/LF, Serial Number: 72K-0577-S, power supply: 230 V, 25.0 FLA, 100 LRA, 60 cycles. Fan diameter: 20 inches Electric Fan Motor, 1/2 horse power, 1075 rpm, 208-230 V, 3.2 amps, 60 Hz, single phase. Evaporator, fins per inch: 11 fpi. Oil Separator- 1.5 Gallon, inside straight-wall dimensions: 6 inches diameter x 1 feet 1/2 inches height. Receiver- 5 Gallon, inside straight-wall dimensions: 8 inches diameter x 2 feet L. Inlet: [1] 1 inches diameter suction port. Outlet: [1] 1/2 inches diameter discharge port. Overall dimensions: 3 feet 3 inches length x 2 feet 6 inches width x 3 feet 9 inches height.