Inventory Index  >  Agitators / Blenders / Mixers  >  Agitators  >  Agitators / Mixers / Dispersers

Used Chemineer Inc. Mixer. Model INNV-5-4. Serial Number: N-11034. Shaft diameter: 1/2 inches Reeves AC Motor with Varidrive Module, 1/2 horse power, 1725 rpm, 2150 max rpm, 538 min rpm, 115/230 V, 10.8/5.4 amps, single phase. [4] Wheels for easy maneuverability. Inlets/outlets: [3] 1 inches diameter 4-bolt, 125 lb. ANSI flanges. Overall dimensions: 29-1/4 inches length x 29-1/4 inches width x 53-1/2 inches height.
Stock No: fpe_NSFM-9.1  |   Mfg: Chemineer  |   Model: INNV-5-4  |   S/N: fpe_N-11034

Used Boston Agitator Drive. Serial Number: F584. Motor specifications: 10 horse power, 1,725 rpm, 122 rpm [final], 208-230-460 V, 60 Hz, 3 phase. Mounting base dimensions: 16 in length x 16 in width with [4] 3/4 inches diameter attachment holes at a center-to-center distance of 13-1/2 inches Overall dimensions: 16 inches length x 16 inches width x 32 inches height.
Stock No: fpe_OI168.  |   Mfg: Boston  |   Model:   |   S/N: fpe_F584

Used Morehouse Cowles Dissolver Disperser. Model: 510VHV. Stainless steel mixer: 1-5/8 inches shaft diameter 10-1/8 inches impeller diameter Louis Allis Motor: 10 Hp, 1725 rpm, 230/460 volts, 24.4/12.2 amps, 60 Hz, 3 phase. Drive rated at 10 horse power at 1300 rpm. Belts are C-90 super-oil-heat. Resistant-static conducting. [2] 3-7/8 inches sprockets. [2] 8-3/8 inches driver pulleys. [1] 8-3/8 inches driven pulley. [1] Allen Bradley motor control box, which contains: [1] Allen Bradley transformer: 0.075 K.V.A., primary voltage: 240-480/220-440 V, secondary voltage 120/110, 60/50-60 HZ. [1] Westinghouse Electric contactor, 200-230/460 V, 7-1/2/10 horse power. Air tank: WESSELS. width. P. 150 P.S.I. Temp. 650 ˚F. Overall dimensions: 5 feet 2-3/4 inches L. x 1 feet 9 inches width. 6 feet 6-1/2 inches H.[ACN151].
Stock No: fpe_SIBI148.11  |   Mfg: Morehouse Cowles  |   Model: 510VHV  |   S/N: fpe_C576S

Used Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-6-2. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Impeller diameter: 12-1/2 inches Pneumatic motor: 2.0 horse power, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: [1] 3/8 inches push on air hose fittings. Shaft dimensions: 4 feet 3-1/2 inches length x 1-1/4 inches diameter. Overall dimensions: 10-5/8 inches length x 1 feet 1/2 inches width x 5 feet 6-1/4 inches height. [ACN32]
Stock No: fpe_DBGV325.1a  |   Mfg: Philadelphia Mixers  |   Model: PGA-6-2  |   S/N: fpe_96AKG1198

Used Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-6-2. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Pneumatic motor: 2.0 horse power, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Impeller diameter: 12-1/2 inches Air inlet: [1] 3/8 inches push on air hose fittings. Shaft dimensions: 4 feet length x 1-1/4 inches diameter. Overall dimensions: 1 feet 9-1/4 inches length x 1 feet 1/2 inches width x 5 feet 3-5/8 inches height. [ACN32]
Stock No: fpe_DBGV324.1a  |   Mfg: Philadelphia Mixers  |   Model: PGA-6-2  |   S/N: fpe_91AKG0819

Used Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-8-3. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation.. Impeller diameter: 12-1/2 inches Speeds can be varied by means of the air control valve. Pneumatic motor: 2.0 horse power, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: [1] 3/8 inches push on air hose fittings. Shaft length: 3 feet 1-1/4 inches Shaft diameter: 1-1/4 inches Overall dimensions: 1 feet 4 inches length x 8-1/4 inches width x 4 feet 5-1/2 inches height. [ACN35]
Stock No: fpe_DBGV326B.1  |   Mfg: Philadelphia Mixers  |   Model: PGA-8-3  |   S/N: fpe_85AKH0720

Used Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-8-3. Portable clamp on mixer. [3] adjustable and collapsible impellers. Impeller diameters: 8-1/2 inches diameter, 12-3/4 inches diameter, 13-3/4 inches diameter Mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Speeds can be varied by means of the air control valve. Pneumatic motor: 2.0 horse power, 1750 rpm air motor. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: [1] 3/8 inches push on air hose fittings. Shaft dimensions: 3 feet 6-3/8 inches length x 1-1/4 inches diameter. Overall dimensions: 9-3/8 inches length x 1 feet 2-1/2 inches width x 4 feet 10 inches height. [ACN35]
Stock No: fpe_DBGV326.1  |   Mfg: Philadelphia Mixers  |   Model: PGA-8-3  |   S/N: fpe_81AKH0503

Used Philadelphia Agitator Gearbox. Serial Number: 80BGJ1146-2. Order No: 2746. Stainless steel shaft. Mounting flange: 13-1/2 inches with [8] 1 inches diameter attachment holes. The flange bolt pattern center-to-center distance is 12 inches Coupling shaft diameter: 3 inches Reliance Electric Motor, 10 horse power, 1755 rpm, 57.4 rpm [final], 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Overall dimensions: 38 inches length x 17 inches width x 35 inches height.
Stock No: fpe_SELM163.1a  |   Mfg: Philadelphia Mixers  |   Model:   |   S/N: fpe_80BGJ1146-2

Stock No: fpe_MASH060  |   Mfg: Lightnin  |   Model: D-2A  |   S/N: fpe_5910545

Used Neptune Gear Driven Clamp Mixer. Model: D-1-0. Serial Number: 5853. Mixer head has 1 inches diameter positive chuck. Heavy portable mixer for heavy fluids or large batches of light viscosity fluids. Leeson Motor, 1/2 Hp, 1725 rpm, 115/208-230 V, 8.8/4.4 FLA, 60 Hz. Overall dim: 20 inches L. x 9 inches width. x 10 inches height.
Stock No: fpe_SPPP1412.a  |   Mfg: Neptune  |   Model: D-1-0  |   S/N: fpe_5853

Stock No: fpe_MASH181A  |   Mfg: Cleveland Eastern Mixers  |   Model: RG-4  |   S/N: fpe_530742

Used Cowles® Dissolver Mixer. Model: 510VH. S/N: 510C45. Mfg. date: 1-11-62. Electra Motors, Inc: 10 hp, 1800 rpm, 220/440 v, 26/13 a, 60 hz, 3 phase. Mixer dimensions: 1-1/2 inch shaft diameter x 9 inch mixer blade. Blue tank dimensions: 11-1/2 inches straight wall x 1 foot diameter (6 gallons). Overall dimensions: 4 feet 7 inches L x 2 feet W x 6 feet 5-1/2 inches H.(H17).
Stock No: fpe_MASH230  |   Mfg: Cowles®  |   Model: 510VH  |   S/N: fpe_510C45

Used MixMor Mixer. Model: OG-15. Serial Number: 45165-1. Shaft dimensions: 1-1/4 inches diameter x 32-1/2 inches L. [2] 10 inches diameter propellers. Baldor Industrial Motor, 1 horse power, 1725 rpm, 300 rpm [final], 208-230/460 V, 5.3-5.2/2.5 amps, 60 cycles, 3 phase. Gear drive mixers are effectively used on higher viscosity products or larger volume applications. Overall dimensions: 24 inches diameter x 66 inches height. [ACN28]
Stock No: fpe_16a.PMI81.1  |   Mfg: Mixmor  |   Model: OG-15  |   S/N: fpe_45165-1

Used Reliance Electric Agitator Drive. Serial Number: 448146-KT. Gear driven for maximum torque output. Shaft dimensions: 3/4 inches diameter x 2-1/2 inches L. Reliance Electric Motor, 3/4 Hp, 1725/860 rpm, 230/460 Volts, 1.35/0.67 Amps, 60 Hz, 3 phase. Motor Drive, 35/17.5 rpm [final]. Mounting base has a 10 inches diameter flange with [4] 1/2 inches diameter attachment holes at a center-to-center distance of 9 inches Overall dimensions: 22 inches length x 11 inches width x 11-1/2 inches height.
Stock No: fpe_RA-30.4a  |   Mfg: Reliance  |   Model:   |   S/N: fpe_448146-KT

Used Sharpee Mixer. Model: FGP-05OUF. Serial Number 39481. Positive chuck maximum propeller diameter: 1/2 inches Baldor Industrial Motor, .30 horse power, 1725/1425 rpm, 208-220/440, 1.4-1.4/.7 amps, 50/60 Hz, 3 phase. Overall dimensions: 9 inches length x 8 inches width x 12 inches height
Stock No: fpe_3.MRD289.a  |   Mfg: Sharpee  |   Model: FGP-05OUF  |   S/N: fpe_39481

Used Cono Agitator Drive. Model: SHV-7400C-AJD. Serial Number: 23807. Bridge mounted. Ratio: 10.1. Final rpm: 172. Motor pulley diameter: 10 inches Drive pulley diameter: 16 inches diameter Reliance Electric Motor, 5 horse power, 1,740 rpm, 230/410 V, 14.2/7.1 amps, 60 Hz, 3 phase. Overall dim: 76 inches length x 19 inches width x 22 1/2 inches height.
Stock No: fpe_HEC014.  |   Mfg: Cono  |   Model: SHV-7400C-AJD  |   S/N: fpe_23807

Stock No: fpe_MASH059  |   Mfg: Shar Systems Inc.   |   Model: S-300  |   S/N: fpe_215972

Used 1997 Chemineer Agitator/Mixer. Model: 3CTDM-.5, Serial Number: 1-97683-33. PO No: 3570-D1-51012. Equip. No: 1A-9010. Equipped for shaft with max diameter of 2 inches 100 rpm [final]. Baldor Industrial Motor, 1/2 horse power, 1725 rpm, 208-230/460 V, 2.1-2/1 amps, 60 Hz, 3 phase. Overall dimensions: 15 inches length x 13 inches width x 20 inches height.
Stock No: fpe_14.MRD295.8a  |   Mfg: Chemineer  |   Model: 3CTDM-.5  |   S/N: fpe_1-97683-33

Used Vertical Mixer/Blender. Stainless Steel. Shaft: 36 in; blade: 12 in, diameter. Pneumatic piston to raise and lower blades. Roller conveyors to receive containers. Delta power hydraulic motor, Model DM23, with circuit pak hydraulic power unit. Transmission: 1˝ horse power. Gear motor: 220 V. Output: 219 rpm. Overall dimensions: 60 inches length x 48 inches width x 120 inches height. This machine is manual operation but can be converted to automate, if desired. [XMR46a]
Stock No: fpe_20.BR1152.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Sharpee Mixer. WEG: 21694. Gear driven for maximum torque. Baldor Industrial Motor, 1 horse power, 1730 rpm, 575 V, 115 amps, 60 Hz, 3 phase. The base is an 8-bolt, 11 inches diameter flange. Shaft diameter: 1-1/4 inches Overall dimensions: 26 inches length x 11 inches width x 11-1/2 height.
Stock No: fpe_3.MRD289B.  |   Mfg: Sharpee  |   Model:   |   S/N: fpe_

Used [2] Bottom-Mounted Magnetic Mixer Drives. Magnet diameter: 8-1/4 inches Dayton Magnetic DC Motor, 1-1/2 horse power, 2500 rpm, 180 V, 7.8 amps. Dayton Motor Drive, 10 ratio, 175 rpm [final]. Bronco Variable Speed Drive, Model: 210, range: 0-2500 rpm. Eliminates the mechanical seal in typical mixer drives and prevents any product contamination. Suitable for food, pharmaceutical, biotech, and personal care applications. Overall dimensions: 28 inches length x 12 inches width x 9 inches height.
Stock No: fpe_DBBP2632.2  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Motorized Power Mixer with Centrifugal Pump. Propeller diameter: 3 inches Impeller diameter: 5-7/8 inches ABB Motor, 1 horse power at 220/380-240/420 V, 1380/1400 rpm, 50 Hz, 3 phase or 1.2 horse power at 250/440-280/480 V, 1670/1690 rpm, 60 Hz, 3 phase. Inlets: [1] 1-1/2 inches diameter suction port. Outlets: [2] 3/4 inches diameter FNPT fittings. Overall dimensions: 1 feet 1 inches length x 1 feet width x 3 feet 6 inches height.
Stock No: fpe_DSVT015B  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Stock No: fpe_HDDG404.a  |   Mfg: Reuland Electric Company  |   Model:   |   S/N: fpe_

Stock No: fpe_MASH031  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Cleveland Mixer Head, Gear Reducer 7785-1.
Stock No: fpe_MRD287.a  |   Mfg: Cleveland/Welbilt  |   Model:   |   S/N: fpe_

Used Mixer Head Gear Reducer Model 77851, 10 inches length x 11 inches width x 7 inches height.
Stock No: fpe_MRD288.a  |   Mfg: Not Specified  |   Model: 77851  |   S/N: fpe_

Used [2] Agitators, overall dimensions 22-1/2 inches length x 22-1/2 inches width x 66 inches height. [2] Reuland Motors, 440 volt, 3 phase, 50 Hz, .5/.25 horse power, 1800/900 rpm, final rpm 48/24.
Stock No: fpe_OI15  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Lightnin Motor-1/3 horse power. Model: 5KH42J391. Motor specifications: 1,725 rpm, 115 V, 5.6 amps, 60 Hz, single phase. Overall dimensions: 7 inches length x 6 inches width x 10 inches height.
Stock No: fpe_OI164.  |   Mfg: Lightnin  |   Model: 5KH42J391  |   S/N: fpe_

Used Reliance Electric Agitator Drive. Gear driven for maximum torque output. Reliance Electric Motor, 5/2.5 Hp, 1,725/860 rpm, 230 V, 60 Hz, 3 phases. Motor drive, 101 ratio, 17/8.5 rpm [final]. Shaft dimensions: 2-1/2 in width x 6 in L. Mount base has a 16-1/2 inches diameter flange with [8] 1/2 inches diameter attachment holes at a center-to-center distance of 15-1/2 inches Overall dimensions: 44 inches length x 18 inches width x 22 inches height.
Stock No: fpe_OI165.  |   Mfg: Reliance  |   Model:   |   S/N: fpe_

Used Bottom and Side Scrape Kettle Agitator. Sized for a 20 gallon kettle. Produces even blends for constant product homogeneity. Scrapers prevent product 'burn-on' by constantly removing product that adheres to the kettle wall. Sterling Electric Motor, 1 horse power, 1725 rpm, 230/460 V, 3.2/1.6 amps, 60 Hz, 3 phase. Sterling Electric Variable Speed Module, 11/45 rpm [min/max]. Overall dimensions: 33 inches length x 19 inches width x 50-1/2 inches height.
Stock No: fpe_RFPM537.4  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Motor with Gear box. Motor: Euro Drive, Type: DF32DT100L4BHR, S.O: 850005152.5.01.85. 001. 230/460 volt, 13.6/6.8 amps, 4-5 in horse power, 60 Hz, 3 phase, 2,025/405 rpm. Gear Box: Euro Drive, Type: RX71D32DT100L4BHR, S.O: 850005152.5.01.85. 001. 2,025/405 rpm [in], 1,350/270 rpm [out]. 4-5 horse power [in], Ratio 1.5.
Stock No: fpe_SELM175.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Motor with Gear Box. Euro Drive, Type: RX71D32DT100L4BHR. S.O: 80011855.601.87.001. 2,025/405 [in] rpm, 1,350/270 [out] rpm. 4-5 [in] horse power. Ratio 1.52.
Stock No: fpe_SELM176.1  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Vertical Tank Agitator. Shaft dimensions: 1-1/2 inches diameter x 9 feet height. Number of impellers: 2. Impeller diameter: 1 feet 2 inches Last used in a 2,000 gallon tank. Overall dimensions: 1 feet 2 inches length x 1 feet 2 inches width x 9 feet height.
Stock No: fpe_SLSP052B  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Agitator. Shaft diameter: 2 inches Shaft length: 58-1/4 inches Blade width: 5 inches Blade diameter: 61 inches Overall dimensions: 5 inches length x 61 inches width x 65-1/2 inches height.
Stock No: fpe_SMPP087B.  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used Stainless Steel Double-Action Mixer. Tilting capability. Can hold a container that is 24 inches diameter x 32 inches height. Mixer is equipped with a shear propeller mounted to a 13 inches height. shaft and a dispersing propeller on a 14 inches height. shaft. Base has [4] casters for easy positioning. Final propeller speeds for shear/dispersing propellers: 1150/354 rpm. Baldor Industrial Motor, 2 horse power, 1725 rpm, 206-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Overall dimensions: 38 inches length x 22 inches width x 42 inches height.
Stock No: fpe_SNSL007.3a  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Used High Shear Mixer. Carbon steel frame with stainless steel impeller. Impeller diameter: 9 inches Shaft dimensions: 1-1/2 inches diameter x 2 feet 7 inches height. General Electric Motor, 10 horse power, 1735 rpm, 220/440 V, 26.8/13.4 amps, 60 Hz, 3 phase. Overall dimensions: 6 feet 10 inches length x 2 feet 7 inches width x 6 feet 2 inches height.[h17] .
Stock No: fpe_SPPP465  |   Mfg: Not Specified  |   Model:   |   S/N: fpe_

Don't see what you're looking for? Let us know what you need.
© 2009 food-processing-equipment.biz - All Rights Reserved.