|
|
|
|
|
|
Used Ritter Chopper Mixer Tank- 300 Gallon. Type: 600. Serial Number: 068901684. Stainless steel. Biro motor: 1.77 horse power [1.32 kw], final rpm: 24, 277/480 V, 5.0/2.5 amps, 60 Hz. [6] Cutting blades: 18-1/2 inches length [each], mixing blade: 16 inches length x 1-1/4 inches width x 29 inches height. Positive displacement pump, Biro motor [pump], 1.20 horse power [0.9 kw], 277/480 V, 3.4/2.0 amps, 60 Hz. Container inlet: 31-1/2 inches length x 7-3/4 width x 15 inches height. Control panel. Overall dimensions: 50 inches length x 38 inches width x 80 inches height.
|
|
Stock No: fpe_SPPP682.21 |
Mfg: Ritter |
Model: |
S/N: fpe_68901684
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Ritter Chopper Mixer Tank- 300 Gallon. Type: 600. Serial Number: 068901683. Stainless steel. Biro motor : 1.77 horse power [1.32 kw], 277/480 V, 5.0/2.5 amps, 60 Hz. [6] Cutting blades: 18-1/2 inches length [each], mixing blade: 16 inches length x 1-1/4 inches width x 29 inches height. Positive displacement pump. Biro motor [pump], 1.20 horse power [0.9 kw], 277/480 V, 3.4/2.0 amps, 60 Hz. Container inlet: 31-1/2 inches length x 7-3/4 width x 15 inches height. [2] Removal tank lids. Control panel. Overall dimensions: 50 inches length x 38 inches width x 80 inches height.
|
|
Stock No: fpe_SPPP684.13 |
Mfg: Ritter |
Model: |
S/N: fpe_68901683
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Walker Stainless Steel Tank- 200 Gallon. Model SP, Serial Number 1584-10002. Mat'l: T304. Inside dimensions: 36 inches diameter x 34 inches height. Feeder dimensions: 26 inches width x 12-½ inches height. Inlets: [1] 1 inches, [1] 1-½ inches Outlet: [1] 4 inches Baldor Motor, 3 horse power, 1,750 rpm, 208-230/460 V, 9-8.6/4.3 amps, 60 Hz., 3 phase. Drive and agitator. Legs: [4] 11 inches height. Feeder has lift top lid and vertical grate. Overall dimensions: 88-½ inches length x 48 inches width x 95 inches height.
|
|
Stock No: fpe_CG-MM210.23 |
Mfg: Walker |
Model: SP |
S/N: fpe_1584-10002
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Walker Single Shell Mix Tank- 410 Gallon. Serial Number: 1377, DRG: 94494-G1. Stainless steel. Motor and motor drive. Propeller diameter: 19-1/2 inches Shaft dimensions: 1-1/2 inches diameter x 43 inches L. [12] Breakers/dividers on bottom dimensions: 4 inches width x 7-1/2 inches height. Inlets/outlets: spray ball 2 inches 'S' line [spray ball], [3] inlet pipes: 4-3/4 inches, 3-3/4 inches, and 10 inches Manway: 16 inches x 20 inches Overall dimensions: 63 inches length x 60 inches width x 94 inches height.
|
|
Stock No: fpe_89a.G640.40 |
Mfg: Walker |
Model: |
S/N: fpe_1377
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Dome-Top Sloped Bottom Jacketed Processor- 350 Gallon. Set up for use with steam. Agitator blades: 23 inches width. Motor: 5 horse power, 230/460 V, 1,745 rpm. Motor pulley diameter: 4 inches Gear pulley diameter: 9 inches; ratio 30, 57.8 final rpm. Outlets: 1 inches [jacket] , 2-1/2 inches side, 9 inches x 3 inches [bottom]. Inlets: 2 inches [top jacket insulated], 2 inches ferruled [top], 5 inches sight glass. Top opening: 30 inches width x 29 inches length x 19 inches height. Overall dimensions: 81 inches width x 81 inches height.
|
|
Stock No: fpe_JMB525 |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Jacketed Mix Tank/Processor- 350 Gallon. Stainless steel. Dome-top; sloped bottom. Set up for use with steam. Agitator blades: 23 inches width. Motor: 5 horse power, 230/460 V, 1,745 rpm. Motor pulley dia: 4 inches; gear pulley dia: 9 inches Ratio 30. Final rpm: 57.8. Outlets: 1 inches [jacket], 2.5 inches [side], 9 inches x 3 inches [bottom]. Inlets: 2 inches ID [top jacket insulated], 6 inches OD [insulated], 2 inches ferruled [top], 5 inches sight glass. Top opening: 29 inches length x 30 inches width. 5 inches Overall dimensions: 81 inches width x 81 inches height.
|
|
Stock No: fpe_JMB535b |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Stainless Steel Rectangular Mix and Blend Tank- 250 Gallon. Level probe reads height of fluid at 4-levels. Vertical agitator: 14 inches dia x 52 inches height. 16 inches diameter manway. US Electrical Motor, 1/2 horse power, 1745 rpm, 208-230/460 V, 1.9-1.84/.92 amps, 60 Hz, 3 phase. Inlets: [2] 2 inches diameter ports, [2] 1 inches diameter ports. Outlets: [1] 4 inches diameter S-Line fitting, [1] 2 inches diameter ball valve, [1] 1 inches diameter ball valve, [1] 2 inches diameter port. Overall dimensions: 56-1/2 inches length x 25 inches width x 82 inches H.
|
|
Stock No: fpe_OI225. |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Stainless Steel Tank with Admix Rotosolver High Shear Mixer - 200 Gallon. Tank inside straight wall dimensions: 45 inches diameter x 30 inches L. Tank features a bridge-mounted agitator with two half-moon flip lid covers. Agitator is marked 'Rotosolver'. Impeller diameter: 4 inches Based on the Rotosolver Impeller diameter, this unit appears to be a model 132RS101. Maximum Batch Size for agitator: 250 gallons. Standard Motor: 10 horse power, 3600 RPM. Shaft dimensions: 2 feet 2 inches length x 1-1/2 inches diameter Outlets: [1] 2 inches diameter S-line fitting. Overall dimensions: 5 feet 9 inches length x 5 feet 5 inches width x 8 feet H.[ACN115,Rotosolver].
|
|
Stock No: fpe_PFGL013.23 |
Mfg: Admix |
Model: 132RS101 |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
|
|
|
Used Stainless Steel Brewing Salt Tank – 300 gallon. w/ Lightnin nd-1 clamp-on agitator. Hinged top. Dished bottom. [1] 3 inches bottom discharge. Inside dimensions: 3 feet 6 inches diameter x 4 feet height.
|
|
Stock No: fpe_TMCB108.4 |
Mfg: Not Specified |
Model: |
S/N: fpe_
|
|
|
|
|
|
|
|
|
|
